First, turn on the spectrophotometer, and 1. wait for 30 minutes or until the spectrophotometer is ready to use.
While waiting the spectrophotometer,
2. turn on the computer.
And then open “UV Pro” apps on your PC.
3.
Next, press the “F4” button on
spectrophotometer to connect it into 4. your PC. And don’t forget to click “connect” on your PC device too.
When it was already connected, choose
“spectrum” on your device. And then click 5. “edit” and “method” to adjust the range of wavelength. 6. Back to spectrophotometer, now, prepare the cuvettes or test tubes. And then fill the first cuvette with the blank(water), and fill the other one with sample liquid. Don’t forget to wipe the outside of the cuvettes.
After that, put it on the spectrophometer,
next to each other. Don’t forget to close 7. the lid after you put the cuvettes in.