‘www.rgpvontine.com
Total No, of Questions] oa No, of Primed Pages 2
RollNo
CE-504
B.E. V Semester
Examination, June 2015
Structural Design and Drawing-I (RCC)
Time: Three Hours
‘Maximum Marks : 70
[Notesi) Attempt any fve questions, one from each unit, All
‘questions cary equa marks
i) Use of 18: 456-2000 is permited.
ii) Draw reiaorcement details wherever required
jv) Missing at if any maybe suitably assumed,
UNIT-1
1. a) Discuss various desirable properties ofconerete and steel
for use in reinforced coneete 4
b) Draw aneat sketch ofthe concrete stress block used in
1S 456:2000 for limit state of collapse in flexure. Desive
the expression for force of compression for ths stress
book. 10
oR,
Find the moment of resistance ofa RC beam 23 cm wide and
45cm deep. The beam s reinforced with 4-16 mm diameter
bars in tension zne. The effective cover tothe reinforcement
is 4mm, grade of concrete is M20 and grade of stel is.
Feds, 4
UNT-II
2. Design a rectangular beam for an effective span of 6m. The
superimposed lod is SOkN/mandsize ofthe beam stimitedto
23m * 45 em overall, Use M20 mix concrete and Fe $15 grade
‘see. Consider the exposure condition asmoderte. 14
‘wwwrgpvonline.com P10
wow-rgpvontine.com
a
oR
A singly enforced R.C. beam as anefective depth of 400 mm
and a breadth of 250 mm. It contains 4-16 mm bas. For M20
‘rade conerete and Fe 415 grade stel, calculate the shear
reinforcement needed for a factored shear force of 250 KN. 14
UNIT
Design a simply supported roof sib for aroom 8.0m 3.5m
clear in size if the live Foad is 4 kN/m. The slab is simply
supported on all the four edges. Exposure condition is
‘moderate. Cheek for deflection also. 4
oR
Design a simply supported cirular slab of diameter 5.0 m. The
slab is subjected to uniformly distibuted load of$kNin® 14
uNIr-1V
Design a short column subjected to axial load of 1200 KN.
‘moment in one direction as 60 KN-m and moment in other
direction as 40 KN-m. 14
oR,
Two columns A and B spaced 4.0 m center to center are
carrying axial loads of 1800 KN and 1500 KN respectively.
Column Ais of size 600mm>600mm and column Bis of size
525mm5S2Smm, Design acombined trapezoidal footing for
the columns and sketch the deals. Take bearing capacity of
soil as 150 kN) 4
UNIT-Vv
Design flight of a single flight waist slab staircase for
residential building of 3.0m storey height. Consider the width
of light as 1.0m and the span of flight as 4. m. 14
‘OR
Design a dog-legged staircase to be provided in a residential
‘multstoreyed building. Clear space availableis?.2m 4.5m,
“Height ofeach fights 1-S mand floorto floor heights 3.0m,
‘Length of landing on either side along the direction of light,
is09m. 4
wwwergpvotitiiétom