You are on page 1of 17

M AR I T I M E

I n t e r n a t i o n a l I n c

M A R I N E F E N D E R S
DESIGN • MANUFACTURING • TESTING
2 3

TABLE OF CONTENTS

MCN Cone Fenders Introduction 3


MCN CONE FENDERS
Maritime International’s MCN cone fender represents the most
MCN Cone Fender Geometry & Dimensions 4
modern technology being offered in the fender industry today. MCN
MCN Cone Fenders Technical Data 5
fenders have the highest energy to reaction ratios of any fender
MCN Cone Fenders Intermediate Rubber Grades 6
currently in use. The high efficiency of the fender allows a smaller,
less costly, rubber fender to be installed. The MCN Cone Fender
MCS Cell Fenders Introduction 7
MCS Cell Fender Geometry & Dimensions 8
has a design deflection of 70% of its height and provides
MCS Cell Fenders Technical Data 9
great flexibility in it’s application to operators.
MCS Cell Fenders Intermediate Rubber Grades 10

ME Leg Fenders Introduction 11


ME Leg Fender Geometry & Dimensions 12
ME Leg Fenders Technical Data 13
ME Leg Fenders Intermediate Rubber Grades 14

AD Arch Fenders Introduction 15


AD Arch Fender Geometry & Dimensions 16
AD Arch Fenders Technical Data 17
AD Arch Fenders Intermediate Rubber Grades 18

Profile Fenders Introduction 19


MCO Cylindrical Rubber Fenders 20
MWG Wing Type Rubber Fenders 20
MSD Square D-Bore Rubber Fenders 21
MSO Square O-Bore Rubber Fenders 21
MDO D•O-Bore Rubber Fenders 22
MDD D•D-Bore Rubber Fenders 22

Other Fenders 23
Laminated I-Beam/Structural Rubber Fenders 23
HSF Shear Fenders 23
Laminated Pile-Wrap Rubber Fenders 24
Foam Filled Fenders 25
Monopile Donut Floating Fenders 26

UHMW & Fixing Hardware 27


UHMW PE Face Pads 27
Anchor Shackles 28
Dock Fender Chain 29
Anchor Bolts 30
4 5

MCN CONE FENDERS MCN CONE FENDER TECHNICAL DATA

MCN GEOMETRY MCN GENERIC PERFORMANCE CURVE

���� ����
����
�� �������� ������
�� ��
���� ����

����������������������

��������������������
� ��� ���

���� ��
�� ��� ���
�� � �� �
�� �� ��

��� ���

�� ��
� �� �� �� �� �� �� ��
�� ��������������
��
� �� �

�� Intermediate grades can be interpolated from standard grades MCN PERFORMANCE


����������������������
MCN DIMENSIONS
����� �� �� �� �� ������
� �� ������ �� ������ � � ���� ���� � � � � � � � �
����� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� ���� �����
�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ����
������� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� ������� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���

������� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� ������� ��� ���� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���

������� ��� ���� ���� ���� ��� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ��� ���� ��� ���� ��� ���

������� ��� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ��� ����

������� ��� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ����

�������� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ��� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ��� ��� ���� ��� ��� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ���� ��� ���� ��� ��� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ���� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ���� ����

�������� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� �� ���� �� ���� ���� ������ ��� �������� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� �����

Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender. ���������������������������������������������������������������������������������������������������������������������������������������������������������������
R = reaction E = energy Values shown are for standard 70% deflection Maximum deflection = 72.5% R = 112% E = 104% Tolerance = +/- 10% �
������������ � � �
6 7

� � � � �
MCN INTERMIDIATE RUBBER GRADES

����� ���� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ���� ����
MCS CELL FENDERS
Maritime International’s MCS Cell fender is the most commonly
�� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ����
���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� used fender in the industry. It is unmatched in durability and
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� reliability and has proven itself over decades of service. MCS fenders
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� are available in the widest range of sizes of any fender type. The
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� large mounting flanges serve to distribute the fender load
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� over the back of the fender panel frame and allows easy
�� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� installation of the mounting bolts.
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
�� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
�� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
�� � ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
���������������������������� �� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��������������������������
��� ���� ���� ���� ���� ���� ����
R = reaction E = energy Values shown are for standard 70% deflection Maximum deflection = 72.5% R = 112% E = 104% Tolerance = +/- 10%
�����������������������������������������������
�������������������������������������������������������������������������� � � � �
�������������������������������������������������������
8 9

MCS CELL FENDERS MCS CELL FENDER TECHNICAL DATA

MCS GEOMETRY MCS GENERALIZED PERFORMANCE CURVE

N-øC
���� ����
øE
�������� ������

���� ����

��������������������
����������������������
��� ���

T T ��� ���

��� ���

øD øE øE øD

�� ��
�� ��� ��� ��� ��� ��� ����� ���
��������������

MCS DIMENSIONS Intermediate grades can be interpolated from standard grades MCS PERFORMANCE

� �� ������ � ���� ���������


����� �� �� �� �� �� �� �� �� �� �� �� �� ����������������������
������ ��� ���� ��� ������ ��� ������ �� ���� ���� ������ ��� ��� ����� �� �� �� �� �� ������
� � � � � � � � � �
������ ��� ���� ��� ������ ��� ������ �� ���� ���� ������ ��� ����� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� ���� �����
������� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ���� ���� ���� ���� ��� ���
������ ��� ���� ���� ������ ��� ������ �� ���� ���� ������ ��� �����
������� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� �� ���� ��� ���� ���� ���� ��� ���
������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� �����
������� ��� ��� ��� ��� ��� ���� ��� ��� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ���� ���� ��� ���
������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� �����
�������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ��� ���� ��� ��� ��� ����
������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� ����� �������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����

������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� � �������� ���� ��� ��� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����

������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� � �������� ���� ��� ��� ��� ���� ��� ��� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����
�������� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���� ����
������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� �����
�������� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ���� ��� ��� ��� ���� ����
������� ���� ���� ���� ������ ���� ������ �� ���� ���� ������ ��� �����
�������� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ��� ���� �����
������� ���� ���� ���� ����� ���� ������ �� ���� ����� ������� ��� ����� �������� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� �����
������� ���� ���� ���� ����� ���� ����� �� ���� ����� ������� ��� ������ �������� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ����� �����

Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender. R = reaction E = energy Values shown are for standard 52.5% deflection Maximum deflection = 55% R = 106% E = 106% Tolerance = +/- 10%
10 11

ME LEG FENDERS
� � � � �
MCS INTERMEDIATE RUBBER GRADES

����� ���� �������


�� ����
�������
�� ����
�������
�� ����
�������� �������� �������� �������� �������� �������� ��������
�� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ����
��������
�� ����
��������
�� ����
Maritime International’s ME Leg / Element fender provides a
���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� �������
compact solution for the mounting of fenders in limited areas. These
�� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� fenders are high performance units which are extremely versatile.
���� �� ����
��
����
����
����
����
���
���� ����
���
����
����
����
���
���
����
���
���
���
���
���
��� ���
��� ���
��� ���
��� ���
��� ���
��� ���
����
���
��� ����
��� ����
���
���
����
����
���
����
���� ���
���� ���� ME fenders have a narrower footprint than traditional leg fenders
���� ��
��
����
����
����
����
���
����
����
����
���
����
����
����
���
���
����
���
���
���
���
���
��� ���
��� ���
��� ���
��� ���
��� ���
��� ���
����
���
��� ����
��� ����
���
���
����
����
���
����
���� ���
���� ����
which allows for a multitude of configurations. They can
���� �� ���� ���� ��� ����
����
��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� be fixed behind a panel or a pile and can be provided in
�� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� varying lengths. ME leg fenders can also be used with a
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ����
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� UHMW-PE shield to provide a low cost alternative
���� ���� ���� ���� ����
��
���� �� ���� ���� ��� ���� ���
����
����
���
���
���
����
���
���
���
���
��� ���
��� ���
��� ���
��� ���
��� ���
���� ���
���
����
��� ����
��� ����
����
���
����
����
����
���
���� ����
���� ��� to an arch type fender.
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
�� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ����
�� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
�� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� �� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
���� � ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
�� � ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ����
�� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ���� ���� ���� ���� ���� ���� ����
R = reaction E = energy Values shown are for standard 52.5% deflection Maximum deflection = 55% R = 106% E = 106% Tolerance = +/- 10%
12 13

ME LEG FENDERS ME LEG FENDERS

ME GEOMETRY ME GENERALIZED PERFORMANCE CURVE

���� ����
W

B C �������� ������
���� ����

����������������������

��������������������
��� ���
H

��� ���

��� ���
D A

��� ���

�� ��
�� ��� ��� ��� ��� ��� �����
��������������
H

Intermediate grades can be interpolated from standard grades ME PERFORMANCE

����������������������
D K E K ����� �� �� �� �� ������
� � � � � � � �
�� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� ������ �������
������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ���� ���� ���� ���� ���� ���
ME LEG FENDERS DIMENSIONS
������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
����� � � � � � � � � ��������� ������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��
������ ��� ���� �� ���� �� ���� �� ���� ��� ���� �� ���� ��� ���� ������� �������� ��� ��� ������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
������ ��� ���� ��� ���� ��� ���� �� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� ���
������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
������ ��� ���� ��� ���� ��� ���� �� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� �����
������ ��� ���� ��� ���� ��� ���� �� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� ����� ������ ��� ���� ��� ��� ��� ���� ��� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
������ ��� ���� ��� ���� ��� ���� �� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� ����� ������ ��� ���� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���� ���� ��� ���
������ ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� �����
������ ��� ���� ��� ���� ���� ��� ���� ��� ���� �� ���� ��� ���� ���� ��� ����� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ��� ���� ��� ���� ��� ���
��� ���
������� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� ����� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ��� ����
������� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� �
������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ��� ��� ���� ����
������� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� �
������� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ��� ���� ��� ���� ��� ����� ������� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����
Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender. R = reaction E = energy Values shown are for standard 57.5% deflection Maximum deflection = 62.5% R = 129% E = 114% Tolerance = +/- 10%
��������������������������������������������������������������������������������������������������������������������������������������������������������������� �
Dimension table based on 1000mm lengths for one leg. ������������ � � � Performance based on 1000mm length.
14 15

AD ARCH FENDERS
� � � � �
ME INTERMEDIATE RUBBER GRADES

����� ���� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� Maritime International’s AD Arch fender is a V type fender that
�� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ����
���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� has been optimized for increased energy absorption compared to
���� ��
��
����
����
����
����
���
����
����
����
���
����
����
����
��� ����
���� ����
��� ����
���� ����
���
����
����
����
���
����
����
����
���
���
����
����
���
���
����
���
���
���
����
���
��� ����
��� ���
traditional arch fenders on the market. They are particularly useful
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� for vessels with high allowable hull pressures and for locations
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� where mounting space is limited. A variety of sizes and
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���
lengths are offered. Additionally these fenders can be
���� ��
�� ���� ���� ����
���
����
����
���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� supplied with bolted or bonded UHMW facings.
���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ���� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
���� �� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���
�� � ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���������������������������� �� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ������ ���
R = reaction E = energy Values shown are for standard 57.5% deflection Maximum deflection = 62.5% R = 129% E = 114% Tolerance = +/- 10%
Based on 1000mm lengths for one leg.
16 17

AD ARCH RUBBER FENDERS AD ARCH RUBBER FENDERS

AD GEOMETRY AD GENERALIZED PERFORMANCE CURVE

E
���� ����

�������� ������

��������������������
����������������������
L
���� ����
H

��� ���
V
F T
��� ���
W

R NXS CXD
��� ���

AD DIMENSIONS
�� ��
�� ��� ��� ��� ��� ����� ���
����� � � � � � � ����� ���������
�� �� �� �� �� �� �� �� �� �� �� �� �� �� �� �� ��������������
������ ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ���� ���� ������� ����������� ��� �
������ ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ������� ����������� ��� �����
������ ��� ���� ��� ���� ��� ���� ��� ���� ��� ���� �� ���� ������� ����������� ��� �����
������ ��� ���� ���� ���� ��� ���� ��� ���� ��� ���� �� ���� ������� ����������� ��� �����
������ ��� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �������� ����������� ��� �����
������ ��� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �������� ����������� ��� �����
������� ���� ���� ���� ���� ���� ���� ��� ���� ��� ���� �� ���� �������� ����������� ��� �����

Intermediate grades can be interpolated from standard grades AD PERFORMANCE


����������������������������

������ ������ ������ ����� ������ �������


������������
����� � ����� � ����� � ����� � ����� � ����� � �����
�� �� �� �� ������
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ���� ��������
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� � � � � � � � �
����� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� �� ���� ���� ������� ����������
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ���� ��������
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ���� ���
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� ���� ��������
������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
������ ���� �������� ���� �������� ���� �������� ���� �������� ���� �������� � �
������� ���� �������� ���� �������� ���� �������� � � � � � � ������ ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���
��������������������������������� ������ ��� ��� ��� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���� ���� ���� ��� ���

������ ��� ��� ��� ��� ��� ��� ��� ���� ��� ���� ��� ���� ��� ���� ���� ���� ��� ����
�� ���� �� ���� �� ����
������ ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ����
����� � ����� � ����� � ����� � ����� � ����� � �����
������ ��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ������� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ���� ����
������ ��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ��� �������
������ R = reaction E = energy Values shown are for standard 52.5% deflection Maximum deflection = 55% R = 139% E = 107% Tolerance = +/- 10%
��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ��� �������
Performance based on 1000mm length.
������ ��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ��� �������
������ ��� ������� ��� ������� ��� ������� ��� ������� ��� ������� ��� �������
������ ��� �������� ��� ������� ��� ������� ��� ������� ��� ������� � �
������� ��� �������� ��� ������� ��� ������� � � � � � �

Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.
18 19

PROFILE FENDERS
� � � � �
AD INTERMEDIATE RUBBER GRADES

����� ���� ������ ������ ������ ������ ������ ������ ������� Maritime International’s profile fenders include cylindrical, D shape,
�� ���� �� ���� �� ���� �� ���� �� ���� �� ���� �� ����
���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� ���� ������� square, wing type and many other shapes. The inherent simplicity of
���
�� ��
��
��� ����
���� ����
����
���� ����
��� ����
���� ����
���
����
����
����
���
����
����
����
���
���
���
���
���
���
���
���
the installation and operation of these fenders makes these units an
���� ��
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� economical solution for docks and piers that are required to cope
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ���
���� ��
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� with a variety of vessels. Maritime provides a standard range
���� ����
�� ���� ����
��� ���� ��� ����
���� ����
��� ����
����
���
����
����
����
���
����
����
���
���
���
���
���
���
���
���
of sizes for each profile, but is able to manufacture to suit
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� specific needs. All profile fenders can be mounted in a
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� �� variety of methods and we can provide you with a
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ���
���
���� ��
��
��� ����
���� ����
����
���� ����
��� ����
���� ����
���
����
����
����
���
����
����
����
���
���
���
���
���
���
���
���
configuration to suit your needs.
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
�� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
�� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
����
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
�� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
�� ��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
����
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ���
�� ��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
����
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���
���� ��
�� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���
��� ���� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���
�� ��
�� ���� ���� ���� ���� ���� ���� ��� ���� ��� ��� ��� ��� ��� ���

R = reaction E = energy Values shown are for standard 52.5% deflection Maximum deflection = 55% R = 139% E = 107% Tolerance = +/- 10%
Performance based on 1000mm length.
20 21

PROFILE FENDERS PROFILE FENDERS

MCO CYLINDRICAL RUBBER FENDERS MSD SQUARE D-BORE RUBBER FENDERS

F
����������������������������������
�������� ������
��������� ��������� ������ �� �� �� ��
��� �� �� �� ����� ���� ���� �� ���� �� ������� ���� ������� ����
L ������� ��� ��������� �� �� ���� ���� ���� ���� ���� ���� ���� ����
OD ID ������� ��� ���������� �� �� ���� ���� ���� ���� ���� ���� ���� ����
E
�������� ��� ���������� �� �� ���� ���� ���� ��� ���� ���� ���� ���� H D
�������� ��� ���������� �� �� ���� ���� ���� ��� ���� ���� ���� ����
�������� ��� ���������� �� �� ���� ��� ���� ��� ���� ���� ���� ����
�������� ��� ���������� �� ��� ���� ��� ���� ��� ���� ���� ���� ���� A
�������� ��� ����������� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� �����������
�������� ��� ����������� ��� ��� ���� ��� ���� ��� ���� ���� ���� ����
��� ��� �������� ��� ����������� ��� ��� ���� ��� ���� ��� ���� ���� ���� ����
W ����������������������������
��� �������� ��� ����������� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� � � � � �� �� �� ��
�������� ������ �������� ��� ����������� ��� ��� ���� ��� ���� ��� ���� ���� ���� ���� � � � � �� �� �� ��
��� ���
�������� ���� ����������� ��� ��� ���� ��� ��� ��� ���� ���� ���� ��� � � � � � � � ��
��� �������� ���� ����������� ��� ��� ���� ��� ��� ��� ���� ���� ���� ��� � � � � � � � ��
�������� ���� ����������� ��� ���� ���� ��� ��� ��� ���� ���� ��� ��� ������� ������ ������ � ������� ������� ������� �������
�� ���
����������������������

��������������������
�������� ���� ����������� ��� ���� ���� ��� ��� ��� ���� ��� ��� ��� ������� ������� ������� ������� ������� ������� ������� �������
��� �������� ���� ����������� ��� ���� ���� ��� ��� ��� ���� ��� ��� ��� ��������� ��� ��� ����� � � ����� �����
�� ��� �������� ���� ����������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ������ ������
�������� ���� ����������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���������������������������������
���
�������� ���� ����������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
� ��� ��� ��� ��� ��� ��� ���
�� �� �������� ���� ����������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
� ��� ��� ��� ��� ��� ��� ���
�������� ���� ����������� ���� ���� ��� ��� ��� ��� ��� ��� ��� ���
�� � �� �� ��� ��� ��� ��� ���
�������� ���� ������������ ���� ���� ��� ��� ��� ���� ��� ��� ��� ���
�� ��
� �� �� ��� ��� ��� ��� ���
R=reaction E = energy Design deflection = 50% ������� �� �� �� �� �� �� ��
�� Performance based on 1000mm length. ������� �� �� �� �� �� �� ��
Performance values and deflections are only for fenders in which the inside ��������� ��� ��� ��� ��� ��� ��� ���
� �
� � �� �� �� �� �� �� �� �� �� diameter equals 50% of outside diameter.
�������������� Contact Maritime for performance at deflections greater than 50%.

MSO SQUARE O-BORE RUBBER FENDERS


MWG WING TYPE RUBBER FENDERS
��������������������������������� Type A Type B
W F
F

A
E
H
H A E
C

B W
�����������
������������������ ����������������������������
���������������������������� � � � �� �� �� �� �� ��
���� � � � �� �� �� �� �� � � � �� �� �� �� �� ��
� ������� � �� ��� ��� �� �� �� ������ � � � � � � �� ��
������� � � � � � � � � ��������� ������� ������� ������� ������� ������� ������� ������� �������
������� ������ ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� ������� �������
������� ������� ������� ������� ������� ������� ������� ������� ������� ��������� ����� �� ������ ������ ������� ������ ������ ��
��������� ������ ������ � ������� �������� ������� ������� ������� ������
������ ���������������������������������
��������������������������������� � ��� ��� ��� ��� ��� ��� ��� ���
� ��� ��� ��� ��� ��� ��� ��� ���
���� ��� ��� ��� ��� ��� ��� ��� ���
������ �� ��� ��� ��� ��� ��� ��� ���
� ��� ��� ��� ��� ��� ��� ��� ���
��������� �� �� �� �� �� �� �� ��
������� �� �� ��� ��� ��� ��� ��� ���
������� �� �� �� �� �� �� ��� ���
������� �� �� �� �� �� �� �� ��
��������� �� �� �� �� �� �� �� ��
������� �� �� �� �� �� �� �� ���
������
��������� �� ���� ������ �� �� �� �� ��
������
22 23

PROFILE FENDERS

MDO D•O-BORE RUBBER FENDERS


OTHER FENDERS
LAMINATED RUBBER FENDERS
� � � Dolphin I-Beam/Structural Fenders
Type A F Type B �� ������� �������� �������� Laminated rubber fenders are perfect for dock application that do not
W �� �������������� ������������� ������������� require energy absorption but rather a rugged, tough rubbing surface.
These fenders are very well suited for barge dock operations where a
durable, long lasting rubbing surface is needed
DUB (optional as
A required)
• Model 115 Fenders are manufactured and designed for
quick and reliable installation in the field.
E �
H • Various attachment configurations available - bolt or weld on.

C • Tough plies of reinforced rubber eliminates chipping, unlike


Type A
Air cells (optional for molded rubber or wood timbers.
increased softness)
Weld-less � � • Size and softness (solid or SR3D-2) varies to satisfy particular
• Countersink style Prepunched through- design requirements.
ways for attachment bolts
with pre-punched to pass • Vertical or horizontal mounting.
�����������
through-ways
���������������������������� • Fender is posi- Type C
� � � �� �� �� �� �� �� tioned into I-beam Countersink Type E
� � � �� �� �� �� �� �� with attachment • Through rods are Type D Extended
������ � � � � � � �� �� bolts passing Type B coutersunk and Angle • Securing flatbar Type F
��������� ������� ������� ������� ������� ������� ������� ������� �������
through I-beam or Standard welded into flatbar • Securing Angle extends over steel or Clamp
������� ������� ������� ������� ������� ������� ������� ������� �������
channel and pre- • Securing flatbar rather than nutted welded to steel concrete box struc- • Steel clamps secure
��������� ����� �� ������ ������ ������� ������ ������ ��
punched through- welded directly to • Fender is welded fascia or bolted into ture for welding or fender to backside
������
ways in fender steel fascia into existing channel concrete fascia bolting of I-beam
���������������������������������
� ��� ��� ��� ��� ��� ��� ��� ���
� ��� ��� ��� ��� ��� ��� ��� ���
������ �� ��� ��� ��� ��� ��� ��� ���
��������� �� �� �� �� �� �� �� ��
������� �� �� �� �� �� �� ��� ���
��������� �� �� �� �� �� �� �� ��
������

MDD D•D-BORE RUBBER FENDERS


F
Type A Type B
� �
W � � � �

� � � � � �
W2
HSF SHEAR FENDERS
E H2 H Maritime International, Inc. maintains a large inventory of high performance shear type
fenders for quick call-out repair and replacement works. Our shear fenders are drop-in
C replacements for most existing installations and come in a variety of sizes 12” – 20”.
Shear fenders are especially effective in docking facilities that cannot accept high
berthing reactions. As indicated by the fenderʼs name, they are designed to work in
����������� ʻshearʼ, in any direction and under compression.
Our shear fenders are unique and
���������������������������� ������
effective when designed as B ����� ����� ������ ����� �����
� � � �� �� �� �� �� �� an integral part of C ���� ��������������� ��������������� ��������������� ��������������� ���������������
� � � �� �� �� �� �� ��
specific docking �������� ��� ������ ��� �� ��� ������� ��� �������� ��� ��������
��������� ������� ������� ������� ������� ������� ������� ������� �������
structures. A ������� ��� �� ��� �� ��� �� ��� �� ��� ��
������� ������� ������� ������� ������� ������� ������� ������� ������� H
��������� ����� �� ������ ������ ������� ������ ������ �� D
�������� ��� ������ ��� �� ��� ������ ��� ������ ��� ������
������
� �� ��� �� ��� �� ����� �� ������ �� ������
���������������������������������
� ��� ��� ��� ��� ��� ��� ��� ��� � ��� � ��� ����� ��� � ��� � ��� �
� ��� ��� ��� ��� ��� ��� ��� ��� � ��� �������� ��� ������ ��� ������ ��� ������ ��� ������
��������� �� �� �� �� �� �� �� ��
������� �� �� �� �� �� �� ��� ���
� ��� � ��� � ��� � ��� � ��� �
L
��������� �� �� �� �� �� �� �� �� W ��������� �� ��� �� ��� �� ��� �� ����� �� �����
������ ��������
24 25

OTHER FENDERS OTHER FENDERS

LAMINATED PILE WRAP FENDERS FOAM-FILLED FENDERS


Pile Cluster Batter
Model 153 Pile Wrap Fenders Plan View
Our Model 153 pile wrap fenders are a recycled product
Model
153-SR3D ��������������������������������������
manufactured from heavy duty rubber material. This material and Back
Fender
�������������������������������
manufacturing process forms the most robust, durable fender in
the world.
Model 153
�������������
• Model 153 Fenders are manufactured in pre-curved units ready
������ ��������� �����������������
to hang. Fenders can be hung prior to pile driving to save ����� �������� ����������������� ��������������
������� ������ ������������ ���������������� ����������������
field time.
������� ����� �� � ������� ����� ���� ����
• The Model 153 can either be welded, bolted, or clamped to Front Fenders
steel dolphin piles, or bolted or clamped to concrete piles. ����� ����������� ��� ��� �� � �� ��
• The size and softness (solid or SR3D-2) varies to satisfy ����� ����������� ��� ��� �� � �� ��
particular design requirements. ����� ����������� ��� ��� �� �� ��� ��
• Area of coverage depends upon batter and number of piles ������ ����������� ��� ��� ��� �� ��� ��
in cluster. 12” Typical Rub
������ ����������� ��� ��� ��� �� ��� ���
to Face:
120” Model 153
• Applications include, but are not limited to: ferry landings, ������ ����������� ��� ��� ��� �� ��� ���
barge mooring dolphins, bridge foundations and landing
dolphins. ������ ����������� ��� ��� ��� �� ��� ���
������ ����������� ��� ��� ��� �� ��� ��
Dolphin Pile Elevation ������ ����������� ��� ��� ��� �� ��� ���
������ ����������� ���� ��� ��� ��� ��� ���
������ ����������� ���� ��� ��� ��� ��� ���
������� ����������� ���� ��� ����� ��� ��� ���
������� ����������� ���� ��� ����� ��� ��� ���
������� ����������� ���� ��� ����� ��� ��� ���
Note: Degree of coverage on pile, thickness of rubber and SR3D-2 soft loop vs. solid rubber configuration as required.
������� ����������� ���� ��� ����� ��� ��� ���
Dolphin Pipe Type A Steel pipe pile Detail ������� ����������� ���� ��� ����� ��� ��� ���
Weld-On Weld-On
Pile Fender Gussets (optional) ������� ����������� ���� ��� ����� ��� ����� ���
Mounting Securing Nut Flatbar welded to steel ������� ����������� ���� ��� ����� ��� ����� ���
Flatbar or angle welded o
pipe pile
Details 20° typical steel pipe pile

Standard Capacity Foam Filled Fenders


������������
153 SR3D-2 with 140° coverage
(note coverage can vary up Steel thru rods ������ • Constructed to US Navy specifications.
��������� �����������������
Solid - 6” to 22”
to 360°
����� • Thick,��������
tough filament nylon reinforced non-marking
����������������� urethane skin.
��������������
Loop - 3” to 8” ���������������� ����������������
������ ������� ������������
• Heat laminated closed cell energy absorbing foam core.
����� ������� �� � ������� ����� ���� ����
Type B Detail ���������• Ultra���heavy duty���chain and��aircraft tire�nets.
Steel pipe pile
Steel gussets as required ����������� �� ��
Bolt-On Gussets (optional) Bolt-On Securing Nut ����������� ��������� ��� ��� �� � �� ��
Steel thru rods Flatbar with nut
securing rubber
Flatbar welded to pipe pile
����������� ��������� ��� ��� �� � �� ��
����������� ��������� ��� ��� ��� �� ��� ��
Flatbar with securing nut
153 with 180° coverage ����������� ��������� ��� ��� ��� �� ��� ��
����������� ��������� ��� ��� ��� �� ��� ��
Steel thru rods
Solid - 6” to 22”
����������� ���������� ��� ��� ��� �� ��� ���
����������� ���������� ��� ��� ��� �� ��� ���
Clamp assembly ����������� ���������� ��� ��� ��� �� ��� ���
Type C
1-1/8” Diameter ����������� ���������� ���� ��� ��� �� ��� ���
Straps/Pipe Hinge Steel pipe pile
1-1/4” Pipe hinge sch. 80 ����������� ���������� ���� ��� ��� ��� ��� ���
����������� ���������� ���� ��� ����� ��� ��� ���
5”
����������� ����������� ���� ��� ����� ��� ��� ���
Pipe hinge (see detail) Actual values for above sizes may vary +/- 15% due to variations in materials, speed
Steel thru rods 1/2” x 5” plate
����������� ����������� ���� ��� �����
of compression, temperatures and tolerances. ��� ��� ���
Angle with 6”
nut securing
rubber
����������� ����������� ���� ��� ����� ��� ����� ���
Also available in other sizes and capacity models - low reaction, high, extra high
Solid - 6” to 22” 153 with 120° coverage Bottom of fender ����������� ����������� ���� ���
and super high capacity. ����� ��� ����� ���
26 27

OTHER FENDERS

MONOPILE DONUT FLOATING FENDERS


UHMW & FIXING HARDWARE
UHMW - PE
• Thick, tough filament nylon reinforced non-marking Fender performance is engineered at 60% compression. The monopile
urethane skin. deflection provides additional energy absorption for the same reaction
• Anti-friction bearing pads allows fender to rotate freely. force rating. UHMW-PE
• Heat laminated closed cell energy absorbing foam core. Maritime International faces all of its complete fender panel systems with high
• Floats with water level. �������������������������������� quality UHMW-PE face pads. The UHMW-PE possesses a low coefficient of friction
which provides a smooth sliding surface for the vessel to travel along the fender face.
����������������� Maritime Internationalʼs UHMW-PE comes in many colors and thicknesses per project
������ ���� ���� ������ �������� requirements and also can be provided in a re-processed grade for a more economical
�������� �������� ������ ���������� ����� solution. UHMW-PE can also be supplied in stand-alone applications not related to rubber
�� � �� � �� � ������� ����� ���� ��� fenders, for sliding surfaces that do not require any energy absorption.
��� ��� � ��� � ��� � ��� �� ���
��� ��� � ��� � ��� � ��� �� ����
��� ��� � ��� � ��� � ��� �� ����
��� ��� � ��� � ��� �� ��� �� ���� ��������������������������������������
��� ��� � ��� � ��� �� ��� �� ���� �������� ������ ������� �������� ������������ �������������
��� ��� � ��� � ��� �� ��� �� ���� ������� ���������� ����� ��� ������� �����
��� ��� � ��� � ��� �� ��� �� ���� ���������������� ������������� ����� ��������� ����� ���������
� ��� ��� ��� � ��� � ��� �� ��� �������������� ���������� ��� �� ��� ����
� ��� ��� ��� � ��� � ��� �� ���� ����������������� ���������� ��� �� ��� ����
� ��� ��� ��� � ��� �� ��� �� ���� ������������������� ���������� � ��� � ���
� ��� ��� ��� � ��� �� ��� �� ���� ����������� ����������� ����� �� ���������� ��
� ��� ��� ��� � ��� �� ��� �� ���� ��������������� ��������� ����� ���� ���������� ����
� ��� ��� ��� � ��� �� ��� �� ���� ��������������� ��������� ��������������� �� ��������������� ��
� ��� ��� ��� � ��� �� ��� �� ���� �������� ����������� ������ �� ������ ��
� ��� � ��� � ��� � ��� �� ���� ��������������� ����������� �������� ��� �������� ���
� ��� � ��� � ��� �� ��� �� ���� ���������������� �������� ��� �������� ���
�����������
� ��� � ��� � ��� �� ��� �� ����
��������������������������� ���������� ���� ������ ���� �������
� ��� � ��� � ��� �� ��� �� ���� �������
������������� ����������� �� �� �������
� ��� � ��� � ��� �� ��� �� ����
���������������� ���������� � ��� � ���
� ��� � ��� � ��� �� ��� �� ����
� ��� � ��� � ��� �� ��� �� ����
�������������������������������������������
� ��� ��� ��� � ��� �� ��� �� ����
�������� ������ ������� �������� ������������ �������������
� ��� ��� ��� � ��� �� ��� �� ����
������� ���������� ����� ��� ������� ����
� ��� ��� ��� � ��� �� ��� �� ����
���������������� ������������� ����� ��������� ����� ���������
� ��� ��� ��� � ��� �� ��� �� ����
�������������� ���������� ��� �� ��� ����
� ��� ��� ��� � ��� �� ��� �� ����
����������������� ���������� ��� ���� ��� ����
� ��� ��� ��� � ��� �� ��� ��� ����
������������������� ���������� � ��� � ���
��� ��� � ��� � ��� �� ��� �� ����
����������� ����������� ����� �� ���������� ��
��� ��� � ��� � ��� �� ��� �� ����
��������������� ��������� ����� ���� ���������� ���
��� ��� � ��� � ��� �� ��� �� ����
��������������� ��������� ���������� ��� ���������� ���
��� ��� � ��� � ��� �� ��� �� ����
�������� ����������� ������ �� ������ ��
��� ��� � ��� � ��� �� ��� ��� ����
� ��� �� ��� ��� ���� ��������������� ����������� �������� ��������� �������� ���������
��� ��� � ���
� ��� �� ��� �� ���� ���������������� ����������� �������� ��������� �������� ���������
���� ��� ��� ���
���� ��� ��� ��� � ��� �� ��� �� ���� ��������������������������� ���������� ���� ������� ���� �������

���� ��� ��� ��� � ��� �� ��� �� ���� ������������� ����������� �� ������� �� �������

���� ��� ��� ��� � ��� �� ��� �� ���� ���������������� ���������� � ��� � ���

���� ��� ��� ��� � ��� �� ��� ��� ����


* Values are averages and are not specifications.
���� ��� ��� ��� � ��� �� ��� ��� ���� ** ASTM test methods are under current procedures.
� ��� � ��� � ��� �� ��� �� ����
Actual values for sizes may vary +/- 15% due to � ��� � ��� � ��� �� ��� �� ����
variations in materials, speed of compression, � ��� � ��� � ��� �� ��� �� ����
temperatures and tolerances. � ��� � ��� � ��� �� ��� ��� ����
� ��� � ��� � ��� �� ��� ��� ����
Also available in other sizes and capacity models -
low reaction, high, extra high and super high capacity. � ��� � ��� � ��� �� ��� ��� ���� Material indicated herein is Maritime Internationalʼs typical UHMW-PE. Other grades are available upon request.
28 29

UMHW & FIXING HARDWARE UMHW & FIXING HARDWARE

ANCHOR SHACKLES DOCK FENDER CHAIN

Anchor Shackles Dock Fender Chain


Maritime Internationalʼs safety bolt anchor shackles are suitable Maritime Internationalʼs dock fender chain is a versatile open
for all fendering applications. The large bow allows multiple link high strength chain suitable for all fendering applications.
chains to be attached to one shackle when necessary. The The long inside length and wide inside width allow standard
shackles can be supplied in a wide range of sizes. Shackles are shackles to fit through the link without the need for special
supplied with a hot dip galvanized finish. The strength of these end links or the need to double shackle the end. Maritimeʼs
shackles exceeds most chain strengths of comparable size. dock fender chain can be supplied in any practical length and
is typically supplied with a hot dip galvanized finish. All sizes
Shackles are forged, quenched and tempered with alloy are proof tested at the factory and a certificate of testing can be
safety bolt-type pins. supplied.

Finish will be hot dip galvanized. All chain is heat treated after welding and before proof testing.
Chain can also be supplied self colored or with special coatings
Cotter pins are stainless steel. upon request. Longer lead times may be required for special
finishes.

øA
Other sizes and grades are available.

4D
øF
C D

øB
1.5D

øE

D
��������������������������������
����������������������������� �������������������� ������� �������
�������� ������ ������
����� �������� ����� �������� ������ �����
������� �������� ���� ����� �������� ����� ��������
�������� � � � � � � ���� ����
���� ������������� ������������� ������������� �������������
������
�� ���� ���� ���� ���� �� ��
��� ���� ��� ���� ����� ��� ��� ���
�� ���� ���� ���� ���� �� ��
���� ���� ���� ��� ����� ���� ��� �
�� ���� ���� ���� ���� �� ��
��� ���� ��� ���� ������ ����� � �����
�� ���� ���� ���� ���� �� ��
���� ���� ���� ��� ������� ��� ����� �����
�� ���� ���� ���� ���� ��� ��
��� ���� ��� ��� ����� ����� ������ ������ �� ���� ���� ���� ���� ��� ��
��� ���� ��� ��� ������ ������ ������ ������� �� ���� ���� ���� ���� ��� ��
��� ���� ��� ��� � ����� ����� � �� ���� ���� ���� ���� ��� ��
��� ���� ��� � ������ ������ ����� ����� �� ���� ���� ���� ���� ��� ��

� ��� � ����� ����� ������� ����� ����� �� ���� ���� ���� ���� ��� ��

����� ��� ����� ����� ����� ����� ����� � �� ���� ���� ���� ��� ��� ��

����� ��� ����� ����� ����� � ������� ����� �� ���� ���� ���� ��� ��� ��

����� ��� ����� ����� ����� ����� ������ ����� �� ���� ���� ���� ��� ��� ��

�� ���� ��� ���� ��� ��� ��


����� ��� ����� ����� ����� ����� ����� �����
�� ���� ��� ���� ��� ��� ��
����� ��� ����� � � ����� ������ �
�� ���� ��� ���� ��� ��� ��
� ��� � ����� ����� ����� � �����
�� ���� ��� ���� ��� ��� ��
����� ��� ����� ����� �� ����� � �����
�� ���� ��� ���� ��� ��� ��
� ���� � ����� �� � ����� �
�� ���� ��� ��� ��� ��� ��
����� ���� ����� ����� �� ����� ����� ������
�� ���� ��� ��� ��� ��� ��
� ���� � ����� �� ����� ����� ������ �� ���� ��� ��� ��� ��� ��
Above strengths and proof loads are for standard shackles. A higher strength alloy grade shackle is available. ABS Certified upon request
30 31

UMHW & FIXING HARDWARE

ANCHOR BOLTS
Anchor Bolts & Fixing Hardware
Maritime International provides a full range of hardware environment, or manufactured to suit project requirements. MI
solutions and accessories to go along with our fender can also accommodate any size diameter and length requirements
systems. All materials are made of standard high strength you may need.
steels, and galvanizations specially made for the marine

Coupler 316 SS Embedded Back Bolt


Heavy Hex Bolt
Carbon Steel,
B ASTM A307, Grade A,
E HDG Class 2A Tolerance

C M

øD

H
øA

16
G
Fixing Bolt
N
Heavy Hex Bolt
Carbon Steel,
øA Overtapped as per
ASTM A307, Grade A, HDG
ASTM A563 Class 2B
Class 2A Tolerance

MI also manufactures fixings for existing concrete with epoxy

�������������������
��������������������� ������������������ �������������������� �������������������
���� ����������� ������������� ���� �������������� ����������� ������������� ���������� ����������������

�� � � �� � � � � �

����������� ����� ����� ����� ����� ����� ����� � �����

���������� ����� ����� ����� ����� ����� � ����� �

������������ ����� ����� ����� ����� ����� ����� ����� ������

������������ ����� � � � ����� ����� ����� ������

������������ ����� ������ ����� ����� ����� ����� ����� ������

������������ ����� ������ ����� � ������ � � ������

������������ ����� ������ � � ������ ����� ����� ��

�������� ����� ����� � ����� ������ ����� ����� ������

�������� ����� ����� ����� ����� �� ����� ����� ������

���������������������
��������������������� ������������������ �������������������� �������������������
���� ����������� ������������� ���� �������������� ����������� ������������� ���������� ����������������

�� � � �� � � � � �

��������� �� �� �� �� ��� �� �� ���

������� �� �� �� �� ��� �� �� ���

��������� �� �� �� ��� ��� �� �� ���

������� �� �� �� ��� ��� �� �� ���

��������� ��� �� �� ��� ��� �� �� ���

������� ��� �� �� ��� ��� ��� �� ���

��������� ��� ��� �� ��� ��� ��� �� ���

������� ��� ��� ��� ��� ��� ��� �� ���

������� ��� ��� ��� ��� ��� ��� �� ���


M AR I T I M E
I n t e r n a t i o n a l I n c

Broussard, Louisiana USA • PH 337.837.7160 • FX 337.837.3610


www.maritime-international.com • sales@maritime-international.com

You might also like