Flat Angular Workpieces in one Elevation
A flat steel bar 4010, 80 long, has a cut-out 20
wide and 30 deep.
Reference lines are the lower edge and center line,
A stool sheet plate 60 x8, 80 long, has a cut-out
20x30 at the upper narrow side. The corners at the
top are cut 45 x 10, the comers at the bottom 10 x10.
Given: Text, angled illustration.
Required: Drawing with dimensions
Given: Text, angled illustration
Required: Drawing with dimensions
Material A
sid
Shaped sheet
Sit
Matera
Stee! sheet B
The stepped sheet plate, 5 thick, is reduced to scale
125.
Draw the workpiece to scale 1:1 and dimension from
the left and lower edges. The dimensions are to be
taken from the drawing,
The template, 10 thick, is reduced to scale 1:2,5
Draw the workpiece to scale 1:1 and dimension from
the center line and the lower object edge. The