Ae
Die cast garcs sre expeeced to mes: ‘the fo" Lowihg: se
PST Spec 505-75:
y levels per
Cetecsty "A" (porosity) for cast well thickness z+ 2/2 inciusive
Maxizer severity level 3 (mex. diz. .060) ”
2 a ae s
:
|
i
i
|
i
|
|
“peeeptable Agrestaete
Cstagory "A" igevesitys for cass wall zo 1*
ire) :Category "C* (shrinkege). for cast wall thickness to 1" inclusive
Maximum severicy level 3
1 2
Acceptable... Aegeprabie
Category "D" {Zoreign material)
level i, 2s long as does not adversely affect macainabilicy
\OTESN, CF part
aeres “ger Gast weld thickness over 2 i" category A end C defects are
* 100" in length by .250" in diameter.
. ducgenent is made by
etociens of-sections cur from castisg with the
xecognize that some porosity say show up on nzchined surtaces
‘SOStingss depending on the acount s: Kk rexcved: The
above satereacy Gxawiags: “an ‘eniy? re epplicasi« to those
secteces.. Agent, 4 it ds mace by comparison. Czher syces of
Metects sre sot ited.
Any.ares of the casting which caanot|tolerece the above severity
levis: shoglé be so noted.
ak-fzee raquirenents, it is pesaissibie to impregna
an approved marerial. Approved impregnation abteriais:
Loczite PHE-10E *
Loctite ae arc #19018 ‘polymer
castings