You are on page 1of 3

Paul's Online Notes

Home / Differential Equations / Laplace Transforms / Dirac Delta


Function

 
MOBILE NOTICE
You appear to be on a device with a "narrow" screen width (i.e. you are probably on a mobile
phone). Due to the nature of the mathematics on this site it is best views in landscape mode.
If your device is not in landscape mode many of the equations will run off the side of your
device (should be able to scroll to see them) and some of the menu items will be cut off due
to the narrow screen width.

Section 4-8 : Dirac Delta Function


When we first introduced Heaviside functions we noted that we could think of them as switches
changing the forcing function, g(t), at specified times. However, Heaviside functions are really
not suited to forcing functions that exert a “large” force over a “small” time frame.

Examples of this kind of forcing function would be a hammer striking an object or a short in an
electrical system. In both of these cases a large force (or voltage) would be exerted on the
system over a very short time frame. The Dirac Delta function is used to deal with these kinds of
forcing functions.

Dirac Delta Function


There are many ways to actually define the Dirac Delta function. To see some of these definitions
visit Wolframs MathWorld. There are three main properties of the Dirac Delta function that we
need to be aware of. These are,

1. δ (t − a) = 0, t ≠ a

a+ε

2. ∫ δ (t − a) dt = 1, ε > 0
a−ε

a+ε

3. ∫ f (t) δ (t − a) dt = f (a) , ε > 0


a−ε

At t = a the Dirac Delta function is sometimes thought of has having an “infinite” value. So, the
Dirac Delta function is a function that is zero everywhere except one point and at that point it can
be thought of as either undefined or as having an “infinite” value.

Note that the integrals in the second and third property are actually true for any interval
containing t = a, provided it’s not one of the endpoints. The limits given here are needed to prove
the properties and so they are also given in the properties. We will however use the fact that they
are true provided we are integrating over an interval containing t = a.
This is a very strange function. It is zero everywhere except one point and yet the integral of any
interval containing that one point has a value of 1. The Dirac Delta function is not a real function
as we think of them. It is instead an example of something called a generalized function or
distribution.

Despite the strangeness of this “function” it does a very nice job of modeling sudden shocks or
large forces to a system.

Before solving an IVP we will need the transform of the Dirac Delta function. We can use the third
property above to get this.

−s t −a s
L {δ (t − a)} = ∫ e δ (t − a) dt = e provided a > 0
0

Note that often the second and third properties are given with limits of infinity and negative
infinity, but they are valid for any interval in which t = a is in the interior of the interval.

With this we can now solve an IVP that involves a Dirac Delta function.

Example 1 Solve the following IVP.


′′ ′ ′
y + 2y − 15y = 6δ (t − 9) , y (0) = −5 y (0) = 7

Show Solution 

Example 2 Solve the following IVP.


′′ ′
2y + 10y = 3u12 (t) − 5δ (t − 4) , y (0) = −1 y (0) = −2

Show Solution 

So, with the exception of the new function these work the same way that all the problems that
we’ve seen to this point work. Note as well that the exponential was introduced into the transform
by the Dirac Delta function, but once in the transform it doesn’t matter where it came from. In
other words, when we went to the inverse transforms it came back out as a Heaviside function.

Before proceeding to the next section let’s take a quick side trip and note that we can relate the
Heaviside function and the Dirac Delta function. Start with the following integral.
t
0 if t < a
∫ δ (u − a) du = {
−∞
1 if t > a

However, this is precisely the definition of the Heaviside function. So,


t

∫ δ (u − a) du = ua (t)
−∞

Now, recalling the Fundamental Theorem of Calculus, we get,


t
d

ua (t) = (∫ δ (u − a) du) = δ (t − a)
dt
−∞

So, the derivative of the Heaviside function is the Dirac Delta function.

© 2003 - 2019 Paul Dawkins Page Last Modified : 6/3/2018

You might also like