All PVC Schedule 80 pipe shall be manufactured from a Type I, Grade I Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454 per ASTM D1784. All compound components shall be listed with NSF ® and meet the requirements of NSF/ANSI Standard 61-G as suitable for Potable Water and is considered Lead Free. The pipe shall be manufactured in strict compliance to ASTM D1785, consistently exceeding the Quality Assurance test requirements of this standard with regard to material, workmanship, burst pressure, flattening, and extrusion quality. Any pipe bells shall meet the requirements of ASTM D2672. This pipe must also meet the requirements of NSF/ANSI Standard 14 and CSA Standard B137.3 and shall bear the marks of the listing agency. This pipe shall have a flame spread rating of 0-25 when tested for surface burning characteristics in accordance with CAN/ULC-S102.2. All pipe shall be stored indoors after production at the manufacturing site until shipped from factory. The pipe shall be manufactured in the USA by Georg Fischer Harvel, LLC., an ISO 9001 certified manufacturer.