Professional Documents
Culture Documents
MJH11021(PNP)
MJH11018, MJH11020,
MJH11022(NPN)
Complementary Darlington
Silicon Power Transistors www.onsemi.com
These devices are designed for use as general purpose amplifiers, 15 AMPERE DARLINGTON
low frequency switching and motor control applications.
COMPLEMENTARY SILICON
Features POWER TRANSISTORS
• High DC Current Gain @ 10 Adc — hFE = 400 Min (All Types) 150−250 VOLTS, 150 WATTS
• Collector−Emitter Sustaining Voltage
VCEO(sus) = 150 Vdc (Min) — MJH11018, 17
NPN PNP
= 200 Vdc (Min) — MJH11020, 19
COLLECTOR 2 COLLECTOR 2
= 250 Vdc (Min) — MJH11022, 21
• Low Collector−Emitter Saturation Voltage
VCE(sat) = 1.2 V (Typ) @ IC = 5.0 A BASE BASE
1 1
= 1.8 V (Typ) @ IC = 10 A
• Monolithic Construction
• These are Pb−Free Devices EMITTER 3 EMITTER 3
MJH11018 MJH11017
MJH11020 MJH11019
MAXIMUM RATINGS MJH11022 MJH11021
Rating Symbol Max Unit
Collector−Emitter Voltage VCEO Vdc
MJH11018, MJH11017 150
MJH11020, MJH11019 200
MJH11022, MJH11021 250 SOT−93
(TO−218)
Collector−Base Voltage VCB Vdc CASE 340D
MJH11018, MJH11017 150
STYLE 1
MJH11020, MJH11019 200
MJH11022, MJH11021 250 1
2
Emitter−Base Voltage VEB 5.0 Vdc 3
Collector Current − Continuous IC 15 Adc
− Peak (Note 1) 30 TO−247
CASE 340L
Base Current IB 0.5 Adc
STYLE 3
Total Device Dissipation @ TC = 25_C PD 150 W
Derate above 25_C 1.2 W/_C
Operating and Storage Junction Temperature TJ, Tstg –65 to _C
Range +150
NOTE: Effective June 2012 this device will
THERMAL CHARACTERISTICS be available only in the TO−247
Characteristic Symbol Max Unit package. Reference FPCN# 16827.
Thermal Resistance, Junction−to−Case RqJC 0.83 _C/W
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be ORDERING INFORMATION
assumed, damage may occur and reliability may be affected. See detailed ordering and shipping information in the package
1. Pulse Test: Pulse Width = 5.0 ms, Duty Cycle v 10%. dimensions section on page 2 of this data sheet.
MARKING DIAGRAMS
TO−247 TO−218
MJH110xx
AYWWG AYWWG
MJH110xx
1 BASE 3 EMITTER
1 BASE 3 EMITTER
2 COLLECTOR
2 COLLECTOR
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
MJH110xx = Device Code
xx = 17, 19, 21, 18, 20, 22
ORDERING INFORMATION
Device Order Number Package Type Shipping
MJH11017G TO−218 30 Units / Rail
(Pb−Free)
www.onsemi.com
2
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
160
140
100
80
60
40
20
0
0 20 40 60 80 100 120 140 160
TC, CASE TEMPERATURE (°C)
Figure 1. Power Derating
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Characteristic Symbol Min Max Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
OFF CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector−Emitter Sustaining Voltage (Note 2) VCEO(sus) Vdc
(IC = 0.1 Adc, IB = 0) MJH11017, MJH11018 150 −
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
MJH11019, MJH11020 200 −
MJH11021, MJH11022 250 −
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ
Collector Cutoff Current
ÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(VCE = 75 Vdc, IB = 0) MJH11017, MJH11018
ICEO
− 1.0
mAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(VCE = 100 Vdc, IB = 0) MJH11019, MJH11020 − 1.0
(VCE = 125 Vdc, IB = 0) MJH11021, MJH11022 − 1.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector Cutoff Current ICEV mAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(VCE = Rated VCB, VBE(off) = 1.5 Vdc) − 0.5
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(VCE = Rated VCB, VBE(off) = 1.5 Vdc, TJ = 150_C) − 5.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Emitter Cutoff Current (VBE = 5.0 Vdc IC = 0) IEBO − 2.0 mAdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ON CHARACTERISTICS (Note 2)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DC Current Gain hFE −
(IC = 10 Adc, VCE = 5.0 Vdc) 400 15,000
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(IC = 15 Adc, VCE = 5.0 Vdc) 100 −
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Collector−Emitter Saturation Voltage VCE(sat) Vdc
(IC = 10 Adc, IB = 100 mA) − 2.5
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
(IC = 15 Adc, IB = 150 mA) − 4.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Base−Emitter On Voltage (IC = 10 A, VCE = 5.0 Vdc) VBE(on) − 2.8 Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Base−Emitter Saturation Voltage (IC = 15 Adc, IB = 150 mA) VBE(sat) − 3.8 Vdc
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
DYNAMIC CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Current−Gain Bandwidth Product (IC = 10 Adc, VCE = 3.0 Vdc, f = 1.0 MHz) fT 3.0 − −
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Output Capacitance MJH11018, MJH11020, MJH11022 Cob − 400 pF
(VCB = 10 Vdc, IE = 0, f = 0.1 MHz) MJH11017, MJH11019, MJH11021 − 600
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Small−Signal Current Gain (IC = 10 Adc, VCE = 3.0 Vdc, f = 1.0 kHz) hfe 75 − −
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎ
SWITCHING CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎ Typical
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Delay Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ td 150 75 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Rise Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ (VCC = 100 V, IC = 10 A, IB = 100 mA tr 1.2 0.5 ms
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Storage Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎ VBE(off) = 5.0 V) (See Figure 2) ts 4.4 2.7 ms
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
Fall Time
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%.
tf 2.5 2.5 ms
www.onsemi.com
3
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
VCC
-100 V
RC SCOPE
TUT
RB & RC varied to obtain desired current levels V2 RB
D1, must be fast recovery types, e.g.: APPROX
1N5825 used above IB ≈ 100 mA +12 V
MSD6100 used below IB ≈ 100 mA 0 51 D1
V1
APPROX
+4.0 V
-8.0 V 25 ms
For td and tr, D1 is disconnected
and V2 = 0
tr, tf ≤ 10 ns
Duty Cycle = 1.0% For NPN test circuit, reverse diode and voltage polarities.
1.0
0.7 D = 0.5
r(t), EFFECTIVE TRANSIENT THERMAL
0.5
RESISTANCE (NORMALIZED)
0.3 0.2
0.2
0.1
P(pk)
0.1 0.05 RqJC(t) = r(t) RqJC
0.07 RqJC = 0.83°C/W MAX
0.02 D CURVES APPLY FOR POWER
0.05
PULSE TRAIN SHOWN t1
0.03 0.01 READ TIME AT t1 t2
0.02 SINGLE PULSE TJ(pk) - TC = P(pk) RqJC(t)
DUTY CYCLE, D = t1/t2
0.01
0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 20 30 50 100 200 300 500 1000
t, TIME (ms)
FORWARD BIAS
TC = 25°C SINGLE PULSE
IC, COLLECTOR CURRENT (AMPS)
www.onsemi.com
4
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
REVERSE BIAS
30
For inductive loads, high voltage and high current must be
IC, COLLECTOR CURRENT (AMPS)
PNP NPN
10,000 10,000
7000
VCE = 5.0 V VCE = 5.0 V
5000 5000
TC = 150°C
hFE , DC CURRENT GAIN
3000
2000 TC = 150°C 2000
500 500
-55°C
200 -55°C 200
100 100
0.2 0.3 0.5 0.7 1.0 3.0 5.0 10 15 0.2 0.3 0.5 0.7 1.0 3.0 5.0 7.0 10 15
IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS)
www.onsemi.com
5
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
PNP NPN
4.5 4.5
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
3.5 3.5
3.0 3.0
IC = 15 A
2.5 2.5
IC = 15 A
2.0 2.0
IC = 10 A
1.5 IC = 10 A
1.5
IC = 5.0 A IC = 5.0 A
1.0 1.0
1.0 2.0 3.0 5.0 10 20 30 50 100 200 300 500 1000 1.0 2.0 3.0 5.0 10 20 30 50 100 200 300 500 1000
IB, BASE CURRENT (mA) IB, BASE CURRENT (mA)
PNP NPN
4.0 4.0
3.0 3.0
VOLTAGE (VOLTS)
VOLTAGE (VOLTS)
2.5 2.5
1.5 1.5
VBE @ VCE = 5.0 V VBE @ VCE = 5.0 V
1.0 1.0
VCE(sat) @ IC/IB = 100 VCE(sat) @ IC/IB = 100
0.5 0.5
0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 0.2 0.5 0.7 1.0 2.0 5.0 10 20
IC, COLLECTOR CURRENT (AMPS) IC, COLLECTOR CURRENT (AMPS)
PNP NPN
BASE BASE
EMITTER EMITTER
www.onsemi.com
6
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
PACKAGE DIMENSIONS
SOT−93 (TO−218)
CASE 340D−02
ISSUE E
NOTES:
C 1. DIMENSIONING AND TOLERANCING PER ANSI
B Q E Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
U 4 A --- 20.35 --- 0.801
A B 14.70 15.20 0.579 0.598
S L C 4.70 4.90 0.185 0.193
D 1.10 1.30 0.043 0.051
E 1.17 1.37 0.046 0.054
1 2 3
K G 5.40 5.55 0.213 0.219
H 2.00 3.00 0.079 0.118
J 0.50 0.78 0.020 0.031
K 31.00 REF 1.220 REF
L --- 16.20 --- 0.638
Q 4.00 4.10 0.158 0.161
S 17.80 18.20 0.701 0.717
U 4.00 REF 0.157 REF
J V 1.75 REF 0.069
D
H STYLE 1:
PIN 1. BASE
V 2. COLLECTOR
G 3. EMITTER
4. COLLECTOR
TO−247
CASE 340L−02
ISSUE F
−T− NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
C Y14.5M, 1982.
−B− 2. CONTROLLING DIMENSION: MILLIMETER.
E
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
U L A 20.32 21.08 0.800 8.30
N B 15.75 16.26 0.620 0.640
4
C 4.70 5.30 0.185 0.209
A D 1.00 1.40 0.040 0.055
−Q− E 1.90 2.60 0.075 0.102
1 2 3 0.63 (0.025) M T B M F 1.65 2.13 0.065 0.084
G 5.45 BSC 0.215 BSC
H 1.50 2.49 0.059 0.098
P J 0.40 0.80 0.016 0.031
−Y− K 19.81 20.83 0.780 0.820
L 5.40 6.20 0.212 0.244
K N 4.32 5.49 0.170 0.216
P --- 4.50 --- 0.177
Q 3.55 3.65 0.140 0.144
U 6.15 BSC 0.242 BSC
W 2.87 3.12 0.113 0.123
W J
STYLE 3:
F 2 PL H PIN 1. BASE
G 2. COLLECTOR
D 3 PL 3. EMITTER
4. COLLECTOR
0.25 (0.010) M Y Q S
www.onsemi.com
7
MJH11017, MJH11019, MJH11021 (PNP) MJH11018, MJH11020, MJH11022 (NPN)
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
www.onsemi.com MJH11017/D
8