sets the pane width shall bo done
ein interior panel ofa lat slab for a live load of 5000 N/1
"Use M 20 concrete and mild steel reinforcement. ;
“of the'slab (200 mm thickness) te
= 25 x 200 = 5,000 N/metre?
5,000 N/metre®
SONNE
10,000 N/metre
6
| 71:50 metre
b
Eb 9:
BM, Caleulations. Absolute sum of the positive and average negative bending moments in each di
L
Where,
esign load on the area L x L
= 10,000 x 6 x 6 = 3,60,000 N
3,60,000 x6
& 8
1.65 M, = 0.65 x 270000 = 175500 Nm
Nm =270000Nm
‘Negative design moment
Positive design moment
BM, for column strip)
Positive moment for column strip
, [BM for middle strip
‘Negative moment for middle strip
85 M, = 0.35 x 270000 = 94500 Nm
% of total negative moment in the panel
75 x 175500 = 181625 Nm,
= 60% of total positive moment in the panel
{60 x 94500 = 56700 Nim,
of total negative moment in the panel
= 0.25 x 175500 = 43875 Nm
Positive moment for middle strip
i = 40% of total positive moment in the panel
= 0.40 x 94500 = 37800 Vm
The depth of the slab must be determined for a bending moment of 56700 Nm.