3: Brick wall with plaster finisher assumed to be imposed on design sample
and the inset indicate the cross section and reinforcement of the samples.
Table 2.4: Categories of reinforced concrete beam sample.
No. Category No. of Name
Sampl 1 Control Sample e 3 CS
2 Heat-damaged to 400oC 3 MH
3 Heat-damaged to 600oC 3 HH
4 Heat-damaged to 400oC and repaired with 20mm 3 MHRC
UHPC at compression surface 5 Heat-damaged to 600oC and repaired with 20mm 3 HHRC UHPC at compression surface 6 Heat-damaged to 400oC and repaired with 3 MHRT 20mm UHPFRC at tension surface 7 Heat-damaged to 600oC and repaired with 3 HHRT 20mm UHPFRC at tension surface