Professional Documents
Culture Documents
Maintain Training Facilities
Maintain Training Facilities
WELDING (SMAW) NC II
MODULE 5
Maintain
Training
Facilities
MAINTAIN TRAINING FACILITIES
HOUSEKEEPING SCHEDULE
Qualification : Station
Area / : Work shop area Tools /
Section Eqpt.
In - Charge : Bonifacio Q. Bermal Services
Jr.
Arrange Trainees √
Chairs and
Tables
Clean Trainees √
Comfort
Room
Segregate Trainees √
and Dispose
waste
3. Check Trainer
carbon
brass, √
replace if
necessary
√ 1. Are the walls and windows cleaned and free from dust?
Inspected by :
Date of Inspection :
TAG-OUT BILL
Plastic Bottle √
Tissue paper √
Paper √
NATURE OF
EQUIPMENT TYPE RECOMMENDATION
BREAKDOWN
WORK REQUEST
Observation:
Date Reported:
Carbon brass
SALVAGE REPORT
INSPECTION REPORT
Operation Procedure
8. Push the electric drill until the bit was fully inserted in the wall or
surface.
9. Slowly pull the drill until the bit was out of the hole.
11. Loosen the chuck using chuck key to remove the bit.
Date : ________________________
Purpose : Carbon brass replace because the Electric drill are not
functioning due to worn out carbon brass.
_____________________ _______________________
Purchasing officer School Administrator