a. Can make call b. Receive system infomations c. Choose PLMN d. Others 2. CRH is used for calculate C2 of a.Serving cell b.Neighbour cell c. a&b 4. Range of timer T3212: a.6 minutes & 24 hours b.1 minute & 24 hours c.6 minutes & 25.5 hours 5. When change T3212 value, does signalling load increase by LU ? a. Yes b. No c. By case 6. The minimum time for MS to read BCCH information of serving cell is a.5 minutes b. 30 seconds c. Others 7. When in idle mode , which system information will be transferred in BCCH for MS SIB 1,2,3,4,7,8 8. C2 is transferred in which SIB a. 1 b. 1&2 c. 1&7 d.7&8 9. Period for MS to calculate C1 and C2 of serving cell is a.1s b. 5s c. 30s 10. In idle mode which part of network orders MS to change cell a. MS b. BTS c. BSC d. MSC 11. Period for MS to calculate C1 and C2 of neighbour cell is a.1s b. 5s c. 30s 12. If having unusual high LU at edge LAC, what can we do a. Decrease CRH b.Increase CRH c. Others 13 In idle mode, MS identifies Cell by: a. LAI&BCCH b. BSIC & BCCH c. CI& BCCH d. LAC& BCCH 14. In idle mode, MS measures: a. Serving cell Rx level b. Serving cell C/I c. Neighbour cells Rx level d. Neighbour cells C/I
15. Which procedure is not used in idle mode
a. Location Updating b. Cell Selection c. Handover d. Cell Reselection