Professional Documents
Culture Documents
2016 Engine Control
Tool 3163890
Engine Control
Engine Family: See Below
The engine control is a portable, handheld electronic device, used to start and control engine
speed on Cummins® electronic engine families. It replaces the throttle pedal, equipment operator
interface panel, and fault code monitoring circuits. The engine control has a datalink provision to
connect to an electronic service tool to monitor engine operation and fault codes. The required
engine control hanesses for the appropriate engines are purchased separately. The engine control
and engine control harnesses are designed to operate with both +12VDC and 24VDC battery
systems.
2 3163894 Harness, engine control (M11/N14 CELECT™ Plus)
2 3163818 Harness, engine control (L10, M11, N14 CELECT™)
2 3164036 Harness, engine control (ISBe and ISB fourcylinder)
2 3164324 Harness, engine control(QST30 Industrial)
2 3164820 Harness, engine control (QST30 GDrive (Non GCS models))
2 3164242 Harness, engine control (Signature, ISX and ISM with CM870, ISB, ISC and
ISL with CM850)
2 3165084 Harness, engine control (480CE Marine)
2 4918272 Harness, engine control (B Gas Plus, C Gas Plus, L Gas Plus and P LPG
Plus)
Not 3163895 Cable, Electrical (6.1m [20ft] provides extension between items 1 and 2)
shown
Not 3164630 Cable, Adapter(Ford/Sterling OEM connector adapter cable used with
shown 3164251)
Not 3164653 Harness, datalink adapter(ISB, ISC and ISL with CM850 and ISM and ISX
shown with CM870)
Last Modified: 27Jun2006
Copyright © 20002010 Cummins Inc. All rights reserved.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tools/316/3163890.html?q=3163890 2/2