Professional Documents
Culture Documents
Arkel Panel Stand - Mounting Directions
Arkel Panel Stand - Mounting Directions
Arkel pano bazası: Arkel pano bazası, asansör panolarında herhangi bir kayma veya düşmeyi önlemek için
destek amaçlı kullanılır. Montaj tamamlandıktan sonra bazanın, asansör panosunun alt kısmına ve yere ayrı ayrı
sabitlenmesi gerekmektedir.
Arkel panel stand: Arkel panel stand is used to prevent slides or falls of elevator panels. After the mounting is
finished, Arkel panel stand must be fixed to ground and the elevator panel individually.
Arkel pano bazası paket içeriği / Arkel panel stand package contents:
• 2 adet tabla(24cmx62cm) / 2 x tray(24cmx62cm)
• 4 adet dikme(4cmx4cmx50cm) / 4 x metal pole(4cmx4cmx50cm)
• 2 adet delikli sac kapak(25cmx51cm) / 2 x metal sheet cover with holes(25cmx51cm)
• 2 adet sac kapak(50cmx64cm) / 2 x metal sheet cover(50cmx64cm)
• 24 adet imbus M6 vida / 24 x imbus M6 screw.
x 24
Not: Eksik veya hasar görmüş parça(lar) olması halinde lütfen satıcınıza başvurunuz.
Note: Please contact your supplier if any part(s) is/are missing or damaged in the package.
Arkel pano bazası montaj adımları / Mounting steps of Arkel panel stand:
Adım 2: Tablayı
Adım 1: Dikmeleri şekil dikmelerin üzerine şekil
1’deki ok yönünde 3’te gösterildiği gibi
tablaya tutturarak şekil oturtunuz ve şekil 4’te
2’de gösterildiği gibi M6 gösterilen yerlerden
vida ile sabitleyiniz. vidalayınız.
Step 1: Place the metal Step 2: Place the tray
poles along the arrow in above the poles as seen in
figure 1 and fix the poles figure 3 and screw the
with M6 screws as tray to the poles as shown
shown in figure 2. in figure 4.
Şekil - 3 / Figure - 3
Şekil - 1 / Figure - 1
Şekil - 8 / Figure - 8
Şekil - 6 / Figure - 6
Arkel Elektrik Elektronik Tic. Ltd. Şti. Bostancı Yolu Şehit Sk. No:36 Yukarı Dudullu/İstanbul/TURKIYE
Tel: +90 533 669 87 55
www.arkel.com.tr V1.0