SUPER HIGH EFFICIENCY SYSTEM
MOST POWERFUL COMPRESSORS
MCLEAN AIR MENERGY SAVING & INTEGRATION
‘AIR COMPRESSORS.
sbetaiaias te iatiaaaeiatiaailea SWoiN
‘AIR COMPRESSORS:
IE SWAN FLEXIBLE MULTI- INTEGRATING CONTROL SYSTEM
Normally, when we start running air compressors in the plant, each of them will depend on
its own pressure setting range to execute loading & unloading operation independently. It
will result in much more energy consumption. After equipping with SWAN FLEXIBLE
MULTI-INTEGRATING CONTROL SYSTEM, we can connect the air compressors into a
group via this system to operate them with much higher efficiency. THE CONTROL SYSTEM
can flexibly select and arrange the Main machine unit and Subsidiary machine units based
on actual air discharge quantity required in the plant during the working day. The air
compressor with inverter named as Main machine unit, and traditional ON/OFF air
compressors named as Subsidiary machine units, can be integrated to run altogether to
provide the most energy-saving optimization system and greatly reduce the electric expense.
SWAN FLEXIBLE MULTI-INTEGRATING CONTROL SYSTEM
|The Main machine unit is equipped with inverter. The Subsidiary machine
units are direct on/off full loading type.
™@ Main and Subsidiary machine units can flexibly be switched to each other
in sequence automatically by either time-setting or manual.
Sets
Omain
Control Box ! [Control Box:
(optional) 1 | (optional)Ill 1. INTERGRATION : Be able to integrate your existing air co
with different brands or models.
(@ 2. EXCELLENT EFFICIENCY AND HIGH RELIABILITY : You can flexibly
choose Main/Subsidiary machine units and suitable connected quantities
based on actual needs. Besides, you can stop and do the routine
maintenance of each unit anytime without shutting down the system to
prevent from any compressed air supply shortage. This high quality
control system can ensure stable operating among the group
compressors with its super reliable components.
1 3. FLEXIBILITY : Be able to choose single machine operation mode or multi-
integrating operation mode flexibly.
Il 4. EXPANSION : The standard system can be extended to connect six air compressors
at one time. Besides, with special requirement, it can be optionally expanded to
connect up to twelve (12) compressor units simultaneously.
IB 5. ECONOMY : If without enough budget, you can choose one Main machine with
inverter and the rest of the machines with Electric control box. It can also achieve
the similar energy saving result.
i PRODUCT SUPERIORITY COMPARISON TABLE
Attn aan eau ges ene
AIRCOMPRESSOR _ INTEGRATING CONTROL SYSTEM
SINGLE 30 HP AIR COMPRESSOR. | Pht wis. LIN ESeATING CONTOL SYSTEM
OPERATION WITH 30HP INVERTER | TO CONTROL 3 SETS OF 10 HP AIR COMPRESSORS,
WITH INVERTERS,
0
30HP x 0:3 (MINIMUM LOSS) = sHP| 10HP X 0.3(MINIMUM LOSS) = 3HP
30HP- 10HP+10HP+10HP=30HP |
HIGH MEDIUM
HIGH Low
Ifthe machine need tobe _| Any one of the air compressors needs
maintained, the compressed | to be maintained, the system still can
air supply will be cut off. _| provide stable compressed air supply.
With the possibility to connect with
SINGLE MACHINE WITH | your original central control system.
INVERTER Don't need additional integrating
system.
‘¢ Most efficient energy-saving rate.
‘Flexible operation -- you can
arrange the Main and Subsidiary air |
‘compressors via this control system
at random, according to different
requirements.
‘Flexible space configuration.
Occupy much more of the
floor space.ET meric) To ¢
[Outer Dimensions LxWxD(mm) 700x600x210
Weight kg 39
MONITOR > EMERGENCY
STOP SWITCH
MAIN INDICATORS
CONTROL AND BUTTONS
AWIRING
CONFIGURATION
PANEL,
inverter Sets
‘Outer Dimensions LxwxD(mm) — 650x600x350
Weight kg 53
Electric Control Box IC CONTROL
BOARD ¥
Outer Dimensions) LxWxD(mm) — 320x160x115
Weight kg 4.74
WIRING >
CONFIGURATION
4 APPEARANCE
‘AIR COMPRESSORS.
TONG CHENG IRON WORKS CO., LTD.
Business office Factory
16 Ta Chin St. Sec.2, Taichung, Taiwan
TEL:886-4-2261-2135 FAX:886-4-2262-8246 Reg. Office =
website:www.swanair.com.tw 116 Shing Yee St.,Taichung, Taiwan
E-Mail:swantc@swanair.com.tw TEL:886-4-2261-2135 FAX:886-4-2261-5465