Professional Documents
Culture Documents
Polyamide 66
Solvay Engineering Plastics www.ulprospector.com
Technical Data
Product Description
TECHNYL® A 218 V30 Black 34 NG is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection molding. The product is
available in black color.
General
Material Status • Commercial: Active
• Processing - Rhodia Injection Molding (English)
Literature 1 • Processing - Technyl A & C Injection Molding (English)
• Technical Datasheet (English)
• E44716-235569
UL Yellow Card 2
• E44716-235570
Multi-Point Data • Isothermal Stress vs. Strain • Secant Modulus vs. Strain (ISO • Viscosity vs. Shear Rate (ISO
(ISO 11403-1) 11403-1) 11403-2)
Part Marking Code (ISO 11469) • >PA66-GF30<
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial
efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that
upon final material selection, data points are validated with the material supplier.
TECHNYL® A 218 V30 BLACK 34 NG
Polyamide 66
Solvay Engineering Plastics www.ulprospector.com
Notes
1
These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current
literature from the supplier.
2
A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to
individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the
association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow
Card Search.
3
Typical properties: these are not to be construed as specifications.
4
After ageing in water/glycol for 200 hr at 135°C
5
After ageing in water/glycol for 200 hr at 120°C
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial
efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that
upon final material selection, data points are validated with the material supplier.
TECHNYL® A 218 V30 BLACK 34 NG
Polyamide 66
Solvay Engineering Plastics www.ulprospector.com
Where to Buy
Supplier
Solvay Engineering Plastics
, Germany
Telephone: +49-800-55-400-600
Web: http://www.rhodia.com/
Distributor
Amco Polymers
Telephone: 800-262-6685
Web: http://www.amcopolymers.com/
Availability: North America
GAZECHIM PLASTIQUES
GAZECHIM PLASTIQUES is a Pan European distribution company. Contact GAZECHIM PLASTIQUES for availability of individual products
by country.
Telephone: +33-4-67-49-55-37
Web: http://www.gazechim.com/
Availability: France
RESINEX Group
RESINEX is a Pan European distribution company. Contact RESINEX for availability of individual products by country.
Telephone: +32-14-672511
Web: http://www.resinex.com/
Availability: Europe
Southland Polymers
Southland Polymers - Full Service Engineering and Commodity Resin Distribution Since 1979
Telephone: 562-921-0444
Web: http://www.southlandpolymers.com/
Availability: Central America, North America, South America
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial
efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that
upon final material selection, data points are validated with the material supplier.