Professional Documents
Culture Documents
Indices gallery
In this topic
Image indices are images that are computed from multiband images. The images emphasize a specific phenomenon
that is present, while mitigating other factors that degrade the effects in the image. For instance, a vegetation index will
show healthy vegetation as bright in the index image, while unhealthy vegetation has lower values and barren terrain is
dark. Since shading from terrain variation (hills and valleys) affect the intensity of images, the indices are created in
ways that the color of an object is emphasized rather than the intensity or brightness of the object. The value of a
vegetation index for a healthy pine tree that is shadowed in a valley will have a similar value as a pine tree that is in full
sunlight. These indices are often built by combinations of adding and subtracting bands, thereby making various band
ratios. They are tied to specific bands that are in specific parts of the electromagnetic spectrum. As a result, they may
only be valid for certain sensors or classes of sensors and it is critical that the proper bands are used in the calculation.
One of the common ways that these indices are used is for comparison of the same object across multiple images over
time. For instance, there might be multiple image of an agricultural field that were taken weekly since the field was
planted and throughout the growing season. The vegetation index would be computed for each image. When you
analyze these weekly vegetation indices you would expect to see a brightening through the growing season. Then
when senescence begins in the fall, you would see the index diminish until the plant is harvested or the leaves are dead
at the end of the season. The normalizing effect of the indices makes this comparison practical. By comparing multiple
fields in a region, you can identify those that thrive and those that are challenged. This type of analysis might also be
used to identify fields that have suffered from storm damage.
Choose the index according to the phenomena you want to analyze. Be certain that the input image is from a sensor
that has the proper bands (wavelengths and range) to support the index of choice. The indices read the metadata from
the image to check the band names. When they find a match, the index will be automatically applied. ArcGIS Pro
generally uses the band names from Landsat 8, but the band names from other sensors may have different names. In
this case, you can substitute the appropriate band from the sensor you are using in the index function. For example,
Landsat 5 TM Raster Product has a band (7) called mid-infrared (MIR), which is comparable to the Landsat 8
counterpart band (7) called shortwave infrared 2 (SWIR2). In this case, the index you want to apply cannot find the
required band name information from the image metadata, so a dialog box opens to ask you to input the proper band
number for the index you want to apply.
Note:
When selecting an index to apply to your imagery, make sure that your source imagery contains the proper band for
the index. For example, the Normalized Difference Snow Index (NDSI) requires a shortwave infrared (SWIR) band, and
will not work properly with imagery that does not contain a SWIR band.
The Modified Soil Adjusted Vegetation Index (MSAVI2) tries to minimize the effect of bare soil on the SAVI.
MSAVI2 = (1/2)*(2(NIR+1)-sqrt((2*NIR+1)2-8(NIR-Red)))
Reference: Qi, J. et al., 1994, "A modified soil vegetation adjusted index", Remote Sensing of Environment, Vol. 48, No. 2,
119–126. We use cookies to support your experience.
http://pro.arcgis.com/en/pro-app/help/data/imagery/indices-gallery.htm 1/5
9/30/2018 Indices gallery—ArcGIS Pro | ArcGIS Desktop
The normalized difference vegetation index (NDVI) is a standardized index allowing you to generate an image
displaying greenness, also known as relative biomass. This index takes advantage of the contrast of characteristics
between two bands from a multispectral raster dataset—the chlorophyll pigment absorption in the red band and the
high reflectivity of plant material in the near-infrared (NIR) band.
PVI
The Perpendicular Vegetation Index (PVI) is similar to a difference vegetation index; however, it is sensitive to
atmospheric variations. When using this method to compare different images, it should only be used on images that
have been atmospherically corrected.
PVI=(NIR-a*Red-b)/(sqrt(1+a2))
SAVI
The Soil-Adjusted Vegetation Index (SAVI) is a vegetation index that attempts to minimize soil brightness influences
using a soil-brightness correction factor. This is often used in arid regions where vegetative cover is low.
NIR and Red refer to the bands associated with those wavelengths. The L value varies depending on the amount of
green vegetative cover. Generally, in areas with no green vegetation cover, L=1; in areas of moderate green vegetative
cover, L=0.5; and in areas with very high vegetation cover, L=0 (which is equivalent to the NDVI method). This index
outputs values between -1.0 and 1.0.
Reference: Huete, A. R., 1988, "A soil-adjusted vegetation index (SAVI)," Remote Sensing of Environment, Vol 25, 295–
309.
TSAVI
The Transformed Soil Adjusted Vegetation Index (TSAVI) is a vegetation index that attempts to minimize soil brightness
influences by assuming the soil line has an arbitrary slope and intercept.
TSAVI=(s(NIR-s*Red-a))/(a*NIR+Red-a*s+X*(1+s2))
http://pro.arcgis.com/en/pro-app/help/data/imagery/indices-gallery.htm 2/5
9/30/2018 Indices gallery—ArcGIS Pro | ArcGIS Desktop
Reference: Baret, F. and G. Guyot, 1991, "Potentials and limits of vegetation indices for LAI and APAR assessment,"
Remote Sensing of Environment, Vol. 35, 161–173.
VARI
The Visible Atmospherically Resistant Index (VARI) is designed to emphasize vegetation in the visible portion of the
spectrum, while mitigating illumination differences and atmospheric effects. It is ideal for RGB or color images; it
utilizes all three color bands.
Reference: Gitelson, A., et al. "Vegetation and Soil Lines in Visible Spectral Space: A Concept and Technique for Remote
Estimation of Vegetation Fraction." International Journal of Remote Sensing 23 (2002): 2537−2562.
Water indices
NDSI
The Normalized Difference Snow Index (NDSI) is designed to use MODIS (band 4 and band 6) and Landsat TM (band 2
and band 5) for identification of snow cover while ignoring cloud cover. Since it is ratio based, it also mitigates
atmospheric effects.
Reference: Riggs, G., D. Hall, and V. Salomonson. "A Snow Index for the Landsat Thematic Mapper and Moderate
Resolution Imaging Spectrometer." Geoscience and Remote Sensing Symposium, IGARSS '94, Volume 4: Surface and
Atmospheric Remote Sensing: Technologies, Data Analysis, and Interpretation (1994), pp. 1942-1944.
MNDWI
The Modified Normalized Difference Water Index (MNDWI) uses green and SWIR bands for the enhancement of open
water features. It also diminishes built-up area features that are often correlated with open water in other indices.
Reference: Xu, H. "Modification of Normalised Difference Water Index (NDWI) to Enhance Open Water Features in
Remotely Sensed Imagery." International Journal of Remote Sensing 27, No. 14 (2006): 3025-3033.
NDMI
The Normalized Difference Moisture Index (NDMI) is sensitive to the moisture levels in vegetation. It is used to monitor
droughts as well as monitor fuel levels in fire-prone areas. It uses NIR and SWIR bands to create a ratio designed to
mitigate illumination and atmospheric effects.
1. Wilson, E.H. and Sader, S.A., 2002, "Detection of forest harvest type using multiple dates of Landsat TM imagery."
Learn more Accept cookies
Remote Sensing of Environment, 80 , pp. 385-396.
http://pro.arcgis.com/en/pro-app/help/data/imagery/indices-gallery.htm 3/5
9/30/2018 Indices gallery—ArcGIS Pro | ArcGIS Desktop
2. Skakun, R.S., Wulder, M.A. and Franklin, .S.E. (2003). "Sensitivity of the thematic mapper enhanced wetness
difference index to detect mountain pine beetle red-attack damage." Remote Sensing of Environment, Vol. 86, Pp.
433-443.
Geology indices
Clay Minerals
The clay ratio is a ratio of the SWIR1 and SWIR2 bands. This ratio leverages the fact that hydrous minerals such as the
clays, alunite absorb radiation in the 2.0–2.3 micron portion of the spectrum. This index mitigates illumination changes
due to terrain since it is a ratio.
Reference: Amro F. Alasta, "Using Remote Sensing data to identify iron deposits in central western Libya." International
Conference on Emerging Trends in Computer and Image Processing (ICETCIP'2011) Bangkok Dec., 2011.
Ferrous Minerals
The ferrous minerals ratio highlights iron-bearing materials. It uses ratio between the SWIR band and the NIR band.
Reference: Segal, D. "Theoretical Basis for Differentiation of Ferric-Iron Bearing Minerals, Using Landsat MSS Data."
Proceedings of Symposium for Remote Sensing of Environment, 2nd Thematic Conference on Remote Sensing for
Exploratory Geology, Fort Worth, TX (1982): pp. 949-951.
Iron Oxide
The iron oxide ratio is a ratio of the red and blue wavelengths. The presence of limonitic-bearing phyllosilicates and
limonitic iron oxide alteration cause absorption in blue band and reflectance in red band. This causes areas with strong
iron alteration to be bright. The nature of the ratio allows this index to mitigate illumination differences caused by
terrain shadowing.
Reference: Segal, D. "Theoretical Basis for Differentiation of Ferric-Iron Bearing Minerals, Using Landsat MSS Data."
Proceedings of Symposium for Remote Sensing of Environment, 2nd Thematic Conference on Remote Sensing for
Exploratory Geology, Fort Worth, TX (1982): pp. 949-951.
Landscape indices
BAI
The Burn Area Index (BAI) uses the reflectance values in the red and NIR portion of the spectrum to identify the areas
of the terrain affected by fire.
NBR
The Normalized Burn Ratio Index (NBRI) uses the NIR and SWIR bands to emphasize burned areas, while mitigating
illumination and atmospheric effects. Your images should be corrected to reflectance values before using this index.
Reference: Key, C. and N. Benson, N. "Landscape Assessment: Remote Sensing of Severity, the Normalized Burn Ratio;
and Ground Measure of Severity, the Composite Burn Index." FIREMON: Fire Effects Monitoring and Inventory System,
RMRS-GTR, Ogden, UT: USDA Forest Service, Rocky Mountain Research Station (2005).
NDBI
The Normalized Difference Built-up Index (NDBI) uses the NIR and SWIR bands to emphasize man-made built-up areas.
It is ratio based to mitigate the effects of terrain illumination differences as well as atmospheric effects.
Reference: Zha, Y., J. Gao, and S. Ni. "Use of Normalized Difference Built-Up Index in Automatically Mapping Urban
Areas from TM Imagery." International Journal of Remote Sensing 24, no. 3 (2003): 583-594.
Related topics
http://pro.arcgis.com/en/pro-app/help/data/imagery/indices-gallery.htm 5/5