Apply Voltage. + is sv,- I s GND,and s is Signal output. For recording sony remote push white microsta rt button l second.. '."tl3 Both Red and blue led will blink 3 times and ,.. L turnoff.Push Remote's 1st bu tton. lt will be 11.,¡¡¡¡ tartw LEOs ln1n9bbntc , 1irn.s. Ready bu tton. And fed led will turn on. Push 2nd button. Blue led will turn on. lt willbe start button. Now pu sh the 3rd button. Both led will blink.This wil l be stop button. Now it is ready to accept signal.Please test first. Ready > Start > Stop.After stopping you need to reapply SV (Close & open) Developer note:When module is triggered by remote,it gives sv (logic 1) and at stop it gives OV Oogic 0).At.outpu re Is - . 1K or 1KS series resistor for current limiting.No n \..L. J"IA add extra resistor to output (No series or i" ..,
pullup resi stor.) Microstart also works with : ••
3.JV too.Adding extra 10 to 100uF capaci tar to power line w "' help better stability. o