Reg.No.:[ | LT
Question Paper Code : 20442
B.EJB.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2018.
Eighth Semester
Electrical and Electronics Engineering
EE 6010 - HIGH VOLTAGE DIRECT CURRENT TRANSMISSION
(Regulations 2013)
(Common to PTEE 6010 — High Voltage Direct Current Transmission for
BE. (Part-Time) ~ Seventh Semester — Electrical and Electronics
Engincering — Regulations — 2014)
‘Time : Three hours Maximum ; 100 marks
10.
Answer ALL questions.
PART A — (10 x 2 = 20 marks)
List the disadvantages of AC Transmission over Jong distance.
Tllustrate the components involved in converter station,
Define pulse number.
‘Deseribe the term delay angle and its significance in rectifier control.
Write the use of tap changing transformer in HVDC.
List any two criteria to decide the effectiveness of the DC filter.
List the sources of reactive power.
Write the purpose of active filter.
Draw the schematic of the DC converter and give the voltage equation.
Write the equations describing the DC network.i.
12.
13,
14,
(a)
(b)
(@)
(b)
(a)
)
(a)
&)
PART B— (6 x 16 = 80 marks)
() Describe the planning for HVDC transmission and DC breakers
with the neat schematic diagram. (8)
(i) Explain the different types of HVDC DC links. 8)
Or
(@ Illustrate the problems involved in DC breaking. What are the
recent advances in DC breakers? ®
(i) Classify the different types of DC links. Illustrate and compare
them. (8)
@ Draw the schematic circuit diagram of a Graetz’s cireuit and
explain its prineiple of operation. @)
(i) Explain the Converter bridge characteristics in detail with
necessary diagram. @)
Or
(Explain the analysis of 12 pulse converter with bridge rectifier. (8)
(ii) Describe the various VSC topologiés in detail. ®
() Describe the steps involved in deenergization of a converter bridge
in a HVDC link. 8)
(i) Draw the converter characteristics of a HVDC link and explain the
different modes of operation. @)
Or
Explain the inverse cosine control and pulse frequency control scheme for
firing angle of HVDC link with neat circuit diagram. a6)
(Explain in detail about reactive power control during transients. (8)
(i) Describe the harmonic analysis for single phase full converter. (8)
Or
(i) What are the main objectives in designing the size of AC harmonic
filters and DC harmonic filters in a HVDC substation? 3)
Gi) Explain in detail with necessary diagram, the operation of SVC
enabled HVDC transmission system. @)
2 2044215.
“(a)
)
Explain in detail, with any one numerical case study about the AC-DC
power flow. (16)
Or
(Formulate the different modelling of DC links and explain the
solution method of DC load flow. ®
(ii) Explain the AC-DC power flow analysis under dynamic conditions.
®
3 20442