K. J. Somaiya College of Engineering, Mumbai -77
(Autonomous College Affiliated to University of Mumbai)
Course Code ‘Course Title
2UHCI0S gineering Drawing
TH P TOT | Total
Teaching
Scheme(HIrs.) on > @ 03
Credits Assigned ou = a w
Marks
Examination A :
Soha waa Ese |tw }o |p pao | Total
20" [20° [wo | soe | - [-[-| - | 100
7 On Screen Examination
Course prerequisites:
‘* Knowledge of various geometric constructions
* Basics of trigonometry
Course Objectives:
Engineering drawing is the language of Engineers. This course aims at building
visualization skills required for every engineer. These skills are developed through
projections of various solid objects by creating their multi-vis
sketching and drafting abilities through manual drawing as well as computer
ws. Learner acquires
jded tools
Course Outcomes:
At the end of successful completion of the course the student will be able to visualize and
draw
COL. Projections of lines and planes
CO2. Orthographic multi-views of any object along with isometric views
CO3. Various views of regular solid geometrical objects
CO4, Sections and development of solid geometrical objects
KISCE 2018 PY B, Tech Syllabus /R2.1 Page 24 of 53.K. J. Somaiya College of Engineering, Mumbai -77
(Autonomous College Affiliated to University of Mumbai)
Module | Unit Details Hrs. | CO
No._| No.
1 _ | Projection of points and lines 9 [cor
Standard sizes_of drawing sheets, Types of lines,
Ld
Dimensioning, Scales, Drawing pencils ete.
Projection of points, Projection of lines inclined to both
the reference planes.
Projection of planes: Triangular, Square, Rectangular,
1.3 | Pentagonal, Hexagonal and Circular planes inclined to
one reference plane and perpendicular to other.
12
P| Visualization of multi-views of object 4 |co2
Multi-view orthographic projections of simple machine
parts by first angle method as recommended by Indian
Standards, Sectional views of simple machine parts (full
section).
Introduction to Isometric drawing and Isometric
2.2. | projection, Construction of isometric drawing of machine
parts
2A
3 | Projection of solids 06 | co3
Introduction to projection of solids, Classification of
solids and projection of right regular solids (Cube, Prism,
3.1 | Pyramid, Tetrahedron, Cylinder and Cone) inclined to
both reference planes (excluding spheres, hollow and
composite solids)
4 | Section and development of solids 10 |co4
Projection of sectional views for solids (Cube, Prism,
Pyramid, Tetrahedron, Cylinder and Cone) cut by plane
41 | perpendicular to one and inclined to other reference
planes (excluding curved cutting planes)
Development of surfaces: Lateral surface development oF
‘4a | ism, Pyramid, Cylinder and Cone with seetion plane
inclined to one reference plane only (excluding reverse
development)
TOTAL | 39
ISCE 2018 FY B. Tech Syllabus JR2.1 Page 25.K. J. Somaiya College of Engineering, Mumbai -77
(Autonomous College Affiliated to University of Mumbai)
Recommended Books:
Sr] Namels of Title Name of Publisher | Edition with Year
No. | _Author/s with Country of Publication
1. | Bhatt ND. | Engineering Drawing | Charotar Publishing | 53" Edition; 2017
(Plane and solid House Pvt. Ltd India Reprint
geometry)
2. | Bhat ND. | Machine Drawing Charotar Publishing | 20" Edition 2014
and House Pvt. Ltd, India
Panchal
VM.
3.| Gill PS. | Engineering Graphics | SK. Kataria & Sons, | ~11" Edition; 2013,
and Drafiin India
Shah PI. | Engineering Graphies |S. Chand Revised Edition;
Publications, India 2008
Parkinson A. | General Engineering Pitman, UK 6" Edition Pitman,
(Alber | Drawing 1968
Charles
KISCE 2018 PY B, Tech Syllabus /R2.1 Page 26 of $3