LARSEN
PRODUCTS CORP.
PERFORMANCE PROPERTIES
(Weld-Crete® & Plaster-Weld®)
Property
Tensile Bond
Strength
Flexural Bond
Strength
‘Shear Bond
Strength
Temperature
Range
Freeze-t
Stability
Toxicity
Fire Resistance
Flammability
‘Acid Resistance
Test Method & Results
(Data obtained from tests conducted periodicaly by leading
‘independent laboratories. Tet reports are available on request.)
Ast c-882 or Weld-rete.®, average 485 ater 28 days
ASTM C-€31 for Paste-Weld®, average 304 ps. ater 28 days
‘ASTM C-78 (concrete beams laminated with bonding agent)
603 psi
ASTI C1042 (slant shear cylinder test) 740 psi. Avg. 14 days.
ASTM C832 (Weld-Creto®; ASTM C631 (Piaster-Weld®)
specimens brought to 145° F, no bond failure.
5 oycles freeze (-10°F & thaw), Freeze-thaw stable.
Enclosed mice exposed to 30 cc volatiized bonding agent for 1 hr.
‘Non-toxic, no ill effects after 7 days.
ASTM E-119 (bonded assembly). Passed 2 hr. Fire Test 1800 °F
and 1 hour Hose Stream Test.
Lab. tests for fire resistance. Non-flammable; meets MIL-B-
19285¢.
1 concrete slabs bonded to 1/2" gypsum plaster subjected to
‘seepage of strong detergents & synthetic urine for 10 hrs. a day.
‘No bond failure after 25 consecutive days. Also unaffected by
alkalinity of cement.
Lab. tested & fel proven, Non-deteriorating bond; retains strength
& flexibility
12000 furor Gouevard amo), Pasay Cty
Wf Ta Nos B5s-0se BSA TOIT
X deb-sbie 91-1933 + Baa-S149
Fax: 85259431 » Emalt eheingcorp@ yahoo.com
Bonds new concrete, stucco, tile setting
beds, and terazzo to any structurally
sound surface, interior or exterior.
Weld-Crete°
High strength bonding agent.
The original chemical concrete bonding agent
incorprates polyvinyl acetate homopolymer in a
patented formulation. For exterior and interior use.
Weld-Crete® will bond new concrete, portland
cement plaster, and cementitious mixes to
structurally sound concrete floors, walls, columns,
‘beams, steps and ramps,
‘tcan be “painted on” ina single application 1 to 10
days prior to concrete placement,
Use Weld-Crete’s open time to your adventage
in bonding to concrete shear walls, where you
need a time-lapse between application of bending
agent, placement of reinforcing stee!, placement of
formwork and placement of concrete,
Weld-Crete® is also used for bonding setting beds
for ceramic tile and for bonding portiand cement
plaster and stucco mixes; and to bond to such
surfaces as brick, biock, tle, marble, metal, glass
Dock, soundly adhered paint (non-soluble in water,
and silicone.
Coverage: 200 ta 300 sq. ft/gallon, approximately,
‘depending upon method of application, temperetures,
porosity and texture of the substrate.
Packaging: 5 gl. (pail) / and 1 gallon,
Color: Blue (non-bleeding)
)) E HSING CORPORATION
pavao:
Ti, 505 Lagman 8, Sons Buildin
‘riage Se tamer Bonfaca Sty Davao City
‘al No. (082) s0ss218