Professional Documents
Culture Documents
Led Exp
Led Exp
Task No 1
Tool used: Proteus 8.0
LED ON/OFF
Components
Bread Board
9v Battery
1 Led
Resistance 1k Ohm
Two Jumper
Battery Connectors
Circuit Diagram
Bred Board Diagram
Explanation
I took bred board, I k ohm resister, 9 v battery, two jumpers, and 5 v led. Then I
attached battery’s red wire with positive row and black wire with negative row. Then I
attached led (green) on bred board. Then I took two jumpers and connected one
jumper with positive and other with negative row where battery is attached. Then put
one jumper’s input with positive column off led then I took I k ohm resistor and
connect it with negative column of the led and put other jumper’s input on the column
where resister’s second leg is connected.
Lab # 6
Task no 2
Tool used: Proteus 8.0
LED ON/OFF
Components
Bread Board
9v Battery
1 Led
Resistance 1k Ohm
Two Jumper
Battery Connectors
Circuit Diagram
Bred Board Diagram
When led (on)