Professional Documents
Culture Documents
(Comcast) How To Self-Install XFINITY TV PDF
(Comcast) How To Self-Install XFINITY TV PDF
https://www.youtube.com/watch?.xfinity.com/anon.comcastonline2/supv=RaZq7LQe
Manual: https://secure
port/help/faqs/HOW8585/X1_QSG_SIK_1014_HOW8585.pdf
What's in a box?
1. Set top box 1. Set top box
2. Power cord 2. Power cord see
3. Remote control with 2 AA batteries 3. Remote ctrl
4. 2 Coax cables: 4. 1 Coax cable
1 long 1 HDMI cable
+ 1 short 5. Instructional Booklet
5. Instruction booklet
*For SD
Start with the longer coax cable by screwing in one end to the
"Cable in" or RF inport (located at the back of the set top box)
- Screw in one end of the shorter coax cable to the "To TV"
- Connect the other end to the "Cable" or "RF" in connector
on the back of your TV.port at the back of the set top box.
*Make sure that all of your connections are finger tight but
make sure that those aren't over tight.
- Screw the other end of the cable into the cable wall outlet
Step 2:
***For standard def
***For HD set up box:
Plug your HDMI cable into the back of your set top box (HDMI
out or HDMI to TV)
- Connect the other end to the back of your TV, into the
HDMI port.
Step 5:
*[SD] If you connected using
the coax cable and the digital set top box
-Tune your TV to Channel 3. If there's no signal, try to tune it
in to Channel 4
*[HD] If you connected your set top box using the HDMI
cable:
- Tune your TV to the appropriate HDMI input (Ex. HDMI 1, 2,
3, 4)