You are on page 1of 7

CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY (DEGREE WING)

Government Institute under Chandigarh (UT) Administration | Affiliated to Panjab University , Chandigarh
Sector-26, Chandigarh. PIN-160019 | Tel. No. 0172-2750947, 2750943
Website: www.ccet.ac.in | Email: principal@ccet.ac.in | Fax. No. :0172-2750872

Department of Computer Sc. & Engineering

General Guidelines for preparing Internship Reports/ Project Report


It is hereby informed to all CSE students that the general format, sequence and other details
related to prepare the various report to be submitted in the department will be as follows:

Format and sequence for project report:


1- Front Page
2- Students’ declaration
3- Certificate by the guide
4- Acknowledgement
5- Abstract
6- Table of contents
7- List of tables
8- List of figures
9- Chapters
10- Appendices
11- References
Other instructions
1- Binding- Hard bound.
2- Number of copies – Each students/group will submit 02 project report in hard bound and 1 CD.
CD should contain complete project report (in pdf format), source code, executable file and
other necessary project files. Name of the project, student name and roll no should be clearly
written on the CD.
3- Front Page – Sky Blue colour, Embedded text in Golden colour. Line Spacing throughout the
report should be 1.5pt. Front matter for the front page has already been communicated.
4- Report should have the following page margins
 Top edge : 25 to 30 mm
 Bottom edge : 25 to 30 mm
 Left side : 35 to 40 mm
 Right side : 20 to 25 mm
5- Tables and figures should conform to the margin specifications. Large size figures
should be photographically or otherwise reduced to the appropriate size before insertion.
6- The general text shall be typed in Font Style “Times New Roman” and Font Size 12.
7-Text should be properly justified.
8- Names and roll no. of all group members should be written on Front matter of the report at their
designated space.

(Ankit Gupta)
AP-CSE
Faculty Coordinator- Project and Training

HoD-CSE
Summer Training Report/ Synopsis/ Minor Project
on

Title of Project
[24 fonts in Times roman]
A Project Report/Synopsis submitted in partial fulfillment of
the requirements for the award of

Bachelor of Engineering
IN
COMPUTER SCIENCE AND ENGINEERING

Submitted by
Name of Candidate
(Roll no: .............)

Under the supervision of


(Name & Address of company/industry/training institute / Guide)

CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY


(DEGREE WING)
Government Institute under Chandigarh (UT) Administration, Affiliated to Panjab University
, Chandigarh
Sector-26, Chandigarh. PIN-160019
Month, Year
CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY (DEGREE WING)
Government Institute under Chandigarh (UT) Administration | Affiliated to Panjab University , Chandigarh
Sector-26, Chandigarh. PIN-160019 | Tel. No. 0172-2750947, 2750943
Website: www.ccet.ac.in | Email: principal@ccet.ac.in | Fax. No. :0172-2750872

Department of Computer Sc. & Engineering

CANDIDATE’S DECLARATION

I hereby declare that the work presented in this report entitled


“……………………………………………………………..”, in fulfillment of the requirement
for the award of the degree Bachelor of Engineering in Computer Science & Engineering,
submitted in CSE Department, Chandigarh College of Engineering & Technology(Degree
wing) affiliated to Punjab University, Chandigarh, is an authentic record of my/our own work
carried out during my degree under the guidance of <Mentor’s name>. The work reported in
this has not been submitted by me for award of any other degree or diploma.

Date : <Student’s name>

Place : <Roll no.>


CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY (DEGREE WING)
Government Institute under Chandigarh (UT) Administration | Affiliated to Panjab University , Chandigarh
Sector-26, Chandigarh. PIN-160019 | Tel. No. 0172-2750947, 2750943
Website: www.ccet.ac.in | Email: principal@ccet.ac.in | Fax. No. :0172-2750872

Department of Computer Sc. & Engineering

CERTIFICATE

This is to certify that the Project work entitled


“……………………………………………….” submitted by <Student name1 and roll no.1,
Student name 2, roll no.,………> in fulfillment for the requirements of the award of Bachelor
of Engineering Degree in Computer Science & Engineering at Chandigarh College of
Engineering and Technology (Degree Wing), Chandigarh is an authentic work carried out by
him/her under my supervision and guidance.
To the best of my knowledge, the matter embodied in the project has not been submitted to any
other University / Institute for the award of any Degree .

Date : <Mentor name>


Place : <Deptt of CSE>
<CCET(Degree Wing)>
< Chandigarh>
CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY (DEGREE WING)
Government Institute under Chandigarh (UT) Administration | Affiliated to Panjab University , Chandigarh
Sector-26, Chandigarh. PIN-160019 | Tel. No. 0172-2750947, 2750943
Website: www.ccet.ac.in | Email: principal@ccet.ac.in | Fax. No. :0172-2750872

Department of Computer Sc. & Engineering

ACKNOWLEDGEMENT
CHANDIGARH COLLEGE OF ENGINEERING AND TECHNOLOGY (DEGREE WING)
Government Institute under Chandigarh (UT) Administration | Affiliated to Panjab University , Chandigarh
Sector-26, Chandigarh. PIN-160019 | Tel. No. 0172-2750947, 2750943
Website: www.ccet.ac.in | Email: principal@ccet.ac.in | Fax. No. :0172-2750872

Department of Computer Sc. & Engineering

ABSTRACT
CONTENTS

Students’s declaration ......................................................................................... i


Certificate by the guide ....................................................................................... ii
Acknowledgement ............................................................................................... iii
Abstract ................................................................................................................ iv
List of tables ........................................................................................................v
List of figures ....................................................................................................... vi

Chapter 1 - <Name of the Chapter> ....................................................................1


1.1 <Name of the topic>………………………………………….
1.2 < >……………………………………………………..

Chapter 2 - <Name of the Chapter> ……………………………………………

You might also like