Professional Documents
Culture Documents
Processing of PELPRENETM PDF
Processing of PELPRENETM PDF
PELPRENETM can be processed through injection molding, extrusion or blow molding using
general-purpose type of molding machines. Also, it can be processed through heating press, melt
casting or rotational molding.
PELPRENETM molding products are easily treated with finishing touches including coating,
printing, vapor deposition, spattering, and heat adhesion.
The pellets of PELPRENETM are usually packed into moisture-proof bags after they were dried.
Thus they can be processed directly, but for any moisturized pellets due to broken bags or not
new ones, please use them after re-drying.
As a guide for drying, the pellets should stay for 4 hours or more in temperatures of 100°C ~
120°C.