Professional Documents
Culture Documents
Prerequisites
The License.dat file has been obtained. For details, see Applying for a License.
Procedure
1. Log in to the web management system. For details, see Logging In to the Web Management
System.
Verification
After the license file is loaded, click View License. Check the license information, as shown in Figure
1.
NOTE:
You can also check the license information on the System ManagementLicense ManagementShow License page of the
web management system.
describes the key parameters displayed on the page. For more information about the
Table 1
parameters, see the LMT Help.
If the number of users supported remains unchanged, the license file fails to be loaded. See the
troubleshooting guide and load the license file again.
NOTE:
The specifications of the control items allowed by the license file to be loaded must be greater than the specifications
authorized by the current license file; otherwise, the loading fails.
Troubleshooting
Symptom Solution
The license file fails View the number of users. If the number of users exceeds the number
to be loaded. allowed by the license file, delete excessive users and load the license file
again.
Check whether the value of Esn in the license.dat file is the same as the
device electronic serial number (ESN). If no, apply for a new license file
using the device ESN.