Professional Documents
Culture Documents
c269 2 PDF
c269 2 PDF
4500
We invite you to look ahead T he WireXpert has a revolutionary 1 - 2500 MHz frequency measurement range. It has
been fully qualified and approved by major cable and connectivity manufacturers. With
and leverage the unique
certification testing up to Category 8 copper cabling, as well as MPO, SM and MM fiber optic
capabilities of our WireXpert
cabling, the WireXpert is ready for 40G and beyond. In fact, major cable vendors are using
Cable Certifier. the WireXpert in their labs for qualifying Category 8 cabling systems under development. As
a result, it is the only instrument you need to certify cables for today, and well into the future.
installer or the end user, the level IV and level V requirements throughout the measurement frequency range.
assurance that pays back for remote and main units – reduces the amount of walking required between drops amd
on every level. makes it easy to operate by two technicians or only one to decrease labor costs. The
for installer and customers’ records. And, lets you re-certify to new standards as they are
approved, without having to revisit the site for additional testing. In addition, you have access
The DCS (Dual Control System) allows one person to do the job that The WireXpert not only exceeds current level IV, but is the only tester that
would normally take two technicians to complete. Reducing labor rates meets the proposed level V accuracy requirements.
on every job.
EASY TO USE
EXPERT SOLUTION
remote units, allows testing from both ends. faster measurement cycles. requirements for cable certification of 40Gbps and higher • Independent adaptor modules for both channel and permanent
• Graphical display allows for new feature and user enhancements. Ethernet networks. link testing are designed with replaceable permanent link cords.
COPPER FIBER
Most advanced cable certification for all standards: Class C/D/E/EA/ Optional fiber adapters make full certification testing for MM (multimode)
FA, Category 3/5e/6/6A, and the new draft CAT 8 as well as ISO draft and SM (single mode) fiber installations possible. The WireXpert provides
standards Class I and Class II. you with a fast, easy and accurate way of determining the pass/fail criteria
test adaptor modules you’ll never have to buy a new unit as higher
Patch-Cord Testing
certification levels emerge.
WireXpert offers an efficient way for quickly identifying and
recording the performance of patch-cords. With its fast and
accurate dual-ended testing, WireXpert‘s patch-cord test kits are
suitable for both manufacturing testing, as well as for incoming
inspection at end user premises.
MPO/MTP Testing
Generate professional warranty and certification test reports includes ReportXpert, a PC based reporting software that produces professional reports
PROFESSIONAL INVESTMENT
Test, certify, report and print against new and emerging cabling standards—required for
4.96” 3.41” USB host connector for flash drive—easy data storage in the field
126 mm 86.7 mm
9.13”
232 mm
every level.
WireXpert Specifications WireXpert Bill of Materials
4500 4500
Specifications Test Parameters Product Features WireXpert Item Quantity Object
Frequency Supported range: 1 to 2500 MHz Cat 6A Autotest time (seconds) 9 1 2 WireXpert: Handheld Units
Accuracy Exceeds TIA 1152 level IIIe, ISO/IEC 61935-1 Level IV accuracy and ISO 61935- Maximum bandwidth (MHz) 2500 2 2 Li-Ion Batteries
1 draft level V Accuracy level V 3 2 Stylus with Cords
Length 500m Max for dual ended Autotest 6” Color touch-panel display on both units • 4 2 Display Protection Covers
Insertion Cycles Channel: 10,000 typical Stores graphical results data • 5 2 CAT 6A Permanent Link Interface Adapters
Permanent link: 5,000 typical
Internal storage capacity (full graphical 2000 6 2 CAT 6A Permanent Link Test Cords
plots)
7 2 CAT 6A Channel Adapters
Supported Attenuation (Insertion Loss) Ruggedized plastic with rubber over-mold •
Copper Cable Tests 8 1 USB Thumb Drive includes Manual and Software
Near-end crosstalk (NEXT) in pair-to-pair and PowerSum format Lithium ion batteries – battery working life 8-hrs
9 2 Talk Head Sets
Attenuation-to-crosstalk ratio far end (ACRF), pair-to-pair and power-sum Advanced diagnostics •
10 2 AC Power Adapters
Return loss USB External Storage •
11 2 Country Specific Power Cord
Loop resistance Cat 6A permanent link adapter •
12 1 Calibration Certificate
Wiremap and shield Cat 6A channel adapter •
13 1 Carrying Case
Cable length Protected against Telco voltages •
14 1 Quick Reference Guide
Total propagation delay Start autotest at smart remote •
Delay skew between pairs Talk between Local and Remote •
Time-domain fault Locator for RL and NEXT Multimode Fiber adapter kit
Singlemode Fiber adapter kit
option
option
Notes:
Connectivity Probe interface connector MPO test kit option
RJ45 Ethernet port for remote control
USB host and device interfaces
Talk set interface: 3.5 mm stereo jack
Test Standards TIA -568-C.2 and TIA 1152 Category 5, 5e, 6, 6A, draft Category 8
ISO/IEC 11801, EN 50173 Class D, E, EA, F, FA draft Class I and Class II Perma-
nent link and channel
Memory More than 2000 full graphical test results saved internally
USB Flash Drive included, for flexible test record storage
opportunities.