Professional Documents
Culture Documents
Plot IDS vs VDS characteristics of JFET for different VGS voltages as well as IDS vs
VGS.
Block Diagram:
Circuit Diagram:
Procedure:
1. Measuring ID versus VDS (Output Characteristics)
a) Build the circuit.
b) Obtain the output characteristics i.e. ID versus VDS
c) Set a particular value of voltage for Vgs . Vary the voltage across drain (Vds) from 0 to 8 V
with steps of 0.5 V and measure the corresponding drain current (ID).
d) Repeat the procedure for different values of VGS. (0V, -1V, -2V)
e) Plot the graph.
Calculations and Observations:
VGS= 0V
VDS(V) IDS(mA)
1 1.67
1.5 2.32
2 3.65
3 5.33
5 10.73
7 10.74
9 10.76
VGS=-1V
VDS IDS
1 1.36
1.5 2.05
2 3.33
5 7.42
7 7.35
9 7.54
Plots:
1. Measuring ID versus VGS (Transconductance Characteristics)
a) For the same circuit, obtain the transconductance characteristics. i.e. ID versus VGS.
b) Set a particular value of voltage for VDS, i.e. 5V. Start with a gate voltage VGS of 0 V, and
measure the corresponding drain current (ID).
c) Plot the graph with ID versus VGS.
Vgs(V) Ids(mA)
0 8 (IDSS)
-1 3.6
-2 2.31
-3 0.72
-4(vp) 0
Plots: