HINCOL
ROADBOND QUICK
ROADBOND Quick is a ready-to-use cold mix
that hardens in the presence of water to quickly
attain the performance of a hot mix.
OVERVIEW
ROADBOND Quick is perfectly coated and stor
able cold mix.
y» ROADBOND Quick hardens in the presence of
water within 30 minutes, and attains perfor-
mance of asphalt mix in 24 hours. However, traf-
fic can be allowed immediately after compaction.
» ROADBOND Quick repairs are long-lasting, even
under heavy traffic, without rutting or oreep.
» ROADBOND Quick generates no VOC, as it do
not contain any volatile components
APPLICATION
ROADBOND Quick is designed for spot repairs and
small maintenance jobs. The rapid increase in co
hesion and high level of performance apart. It
is ideal in situations where a quick response and
re-admission of traffic is a major requirement.
ROADBOND Quick is applicable to:
> Wearing courses in all types of traffic.
> Repair of Highways, Accessways, Runways &
Taxiways,
> Repair of potholes in all kinds of Bitumen pave-
ments & Conorete Pavements.
ROADBOND QUICK IS WELL
SUITED FOR
> Sealing potholes
> Localized re profiling
> Repairing trenches
> Maintenance of sidewalks, garden paths, bike
trails
> Repair of utiity cuts
CHARACTERISTICS
With favorable weather conditions, the perfor
mance of ROADBOND Quick mix increases very
strongly and rapialy with in the 24 hours after the
‘end of compaction.
Durability of pothole repair depends on the care
taken during preparation phase.
PACKING
ROADBOND Quick is packed in 25 Kg PailsAPPLICATION PROCEDURE
Step 1: Preparing the Pothole Preparing the
pothole is a crucial point.
‘Sweep to remove stagnant water and unrelated
items (fines, gravel etc.)
Step 2: Filling the Pothole:
Fill ROADBOND Quick in the pothole, by spreading
with a trowel in a single layer if the depth is 40 mm.
if pothole is deeper, apply in successive lifts of 40 -
50 mm thickness.
Step 3: Wetting the Mix:
Water the surface of the mix moderately and evenly.
Amount of water needed for setting ROADBOND
Quick is about 2% of the weight of the asphalt mix.
Flow of water in the interstices of the mix, initiates
ie
HINDUSTAN COLAS
the cohesion by increasing reaction. Too much
water delays the setting of the mix, and significantly
reduces its mechanical performance.
Step 4: Compacting the Mix:
Small Potholes can be manually compacted by
Tamping.
For larger areas compaction with a vibrating plate is
ideal
Compaction by Mechanical Roller cylinder, by
making several passes will enhance life of repair
Step 5: Open to Traffic:
After Proper Compaction the treated pothole area
can be opened to traffic.
COLAS
(A Joint Venture of Hindustan Petroleum Corporation Limited and Colas SA. France)
HINCOL HOUSE, B-601, Marathon Futurex, N M Joshi Marg, Lower Parel, Mumbai - 400013,
Ph, +91-22-28023250 Web: www.hincol.com — Email
: customerconnect@hincol.com