Professional Documents
Culture Documents
52005654-04 en de LR PDF
52005654-04 en de LR PDF
2 PHOENIX CONTACT
Surge voltages – an underestimated danger Contents
Surge protection
for the power supply 6
Surge protection
for measurement and control
technology 16
Surge protection
for the Ex area 20
Surge protection
for transceiver systems 28
CHECKMASTER 2 –
Each day over four million lightning strikes occur all over the world.* the test system for surge
Ten percent of these are cloud-to-ground lightning strikes with surge protective devices 32
currents up to 200,000 amperes. In addition to these four million lightning
strikes that occur each day due to thunderstorms, surge voltages are also Lightning monitoring system
generated within local power grids. These are caused, for example, by with LM-S 34
switching operations, errors or switched-mode power supply units.
Whatever their cause, time and again surge voltages lead to unexpected Mains interference filters for
device faults or system failures. TRABTECH surge protection provides power supplies and
comprehensive and effective protection against such effects. measurement signals 36
PHOENIX CONTACT 3
All-round safety with the
protective circuit
Power supply
Optimally coordinated arresters for supplies,
distributors and terminal devices safeguard
the power supply.
MCR technology
Optimized arresters are available for a wide
range of signal types and measuring principles.
Information technology
High-speed protection (CAT.6+) for data
and communication technology.
Transceiver technology
So that private mobile radio and mobile
communication as well as satellite or radio
systems have reception whatever the weather.
4 PHOENIX CONTACT
PHOENIX CONTACT 5
Surge protection
for the power supply
Status at a glance
Each connector has its own
display to indicate its function
status. What's more, a large
area for applying your own
marking is provided.
Remote signaling
A common floating
changeover contact enables
remote signaling without
taking up extra space.
6 PHOENIX CONTACT
Type 1 lightning current arrester
FLASHTRAB-SEC-HYBRID:
A powerful lightning current arrester with integrated arrester
backup fuse
• Combination of spark gap without mains follow current and
surge-proof fuse
• Can be used without separate backup fuse thanks to integrated
overcurrent protection
• Arrester free of leakage, suitable for use in the unmetered area
• For use in 230/400 V systems with short-circuit output up to
100 kA and up to 50 kA in 400/690 V systems
• Plugs can be tested with CHECKMASTER 2
2-conductor 4-conductor
system system
m
8m
10
mm
36
PHOENIX CONTACT 7
Type 1 lightning current arrester
FLASHTRAB-SEC-PLUS-440:
The compact power package for 400/690 V
• Spark gap without mains follow current
• Arrester free of leakage, suitable for use in the unmetered area
• Satisfies TOV requirements for use in IT systems
• High level of lightning current discharge capacity of 35 kA per position
• Fuse-free use up to 400 A gG
• Low voltage protection level of ≤ 2.5 kV
• Plugs can be tested with CHECKMASTER 2
N
PE
5-conductor
system
m
4m
14
mm
36
3-phase TN-C-/IT systems N-PE spark gap
L1 FLT-SEC-P-T1-3C-440/35-FM FLT-SEC-P-T1-N/PE-440/100-FM
L2 Order No. 2905988 Order No. 2907262
L3
PEN
4-conductor
system
m
7m
10
mm
36
8 PHOENIX CONTACT
Type 1 lightning current arrester
FLASHTRAB-SEC-PLUS-350:
A compact lightning current arrester for powerful systems
• Spark gap without mains follow current
• Arrester free of leakage, suitable for use in the unmetered area
• For use in 230/400 V systems with short-circuit output
up to 100 kA
• Fuse-free use up to 315 A gG
• Low voltage protection level of ≤ 1.5 kV
• Plugs can be tested with CHECKMASTER 2
N PEN
PE
m
5-conductor 4-conductor
m
4m
8m
14
system system
10
L1 FLT-SEC-P-T1-2S-350/25-FM L1 FLT-SEC-P-T1-2C-350/25-FM
L2 Order No. 2905418 L2 Order No. 2905416
N PEN
PE
m
4-conductor 3-conductor
8m
mm
system system
10
72
L1 FLT-SEC-P-T1-1S-350/25-FM L1 FLT-SEC-P-T1-1C-350/25-FM
N
Order No. 2905415 PEN
Order No. 2905414
PE
3-conductor 2-conductor
mm
mm
system system
72
36
PHOENIX CONTACT 9
Type 1 lightning current arrester
FLASHTRAB-SEC-PLUS-264:
A powerful lightning current arrester for extremely
high lightning currents
• Spark gap without mains follow current
• Arrester free of leakage, suitable for use in the unmetered area
• Fuse-free use up to 500 A gG
• Installation effort reduced to a minimum
• High level of lightning current discharge capacity of 50 kA per position
• Low voltage protection level of ≤ 2.5 kV
• Plugs can be tested with CHECKMASTER 2
PEN
mm
10
mm
72
36
10 PHOENIX CONTACT
Type 1 + type 2 lightning current arrester and surge protective device
FLASHTRAB-SEC-T1+T2:
Combined lightning current arrester and
surge protective device
• Type 1 and type 2 protective devices directly coordinated
• For use in main current distribution/industrial distribution,
within the post-meter area
• Fuse-free use up to 315 A gG
• Installation work reduced to a minimum
• Low voltage protection level of ≤ 1.5 kV
• Plugs can be tested with CHECKMASTER 2
N PEN
PE
m
5-conductor 4-conductor
m
4m
8m
14
system system
10
L1 FLT-SEC-T1+T2-2S-350/25-FM L1 FLT-SEC-T1+T2-2C-350/25-FM
L2 Order No. 2905468 L2 Order No. 2905467
N PEN
PE
m
4-conductor 3-conductor
8m
mm
system system
10
72
L1 FLT-SEC-T1+T2-1S-350/25-FM L1 FLT-SEC-T1+T2-1C-350/25-FM
N
Order No. 2905466 Order No. 2905465
PEN
PE
3-conductor 2-conductor
mm
mm
system system
72
36
PHOENIX CONTACT 11
Type 2 surge protective device
VALVETRAB-SEC-T2:
Space-saving surge protection
• Type 2 surge protective device
• For use in sub-distribution and floor distribution before the
residual current protective device
• Fuse-free use up to 315 A gG
• Overall width of just 12 mm per channel
• Low voltage protection level of ≤ 1.5 kV
• Plugs can be tested with CHECKMASTER 2
N PEN
PE
5-conductor 4-conductor
mm
mm
system system
48
36
L1 VAL-SEC-T2-2S-350-FM L1 VAL-SEC-T2-2C-350-FM
L2 Order No. 2905338 L2 Order No. 2905337
N PEN
PE
4-conductor 3-conductor
mm
mm
system system
36
24
L1 VAL-SEC-T2-1S-350-FM
N Order No. 2905333
PE
3-conductor
mm
system
24
Note: VALVETRAB SEC is also available for 120 V power supply systems.
12 PHOENIX CONTACT
Type 2 surge protective device – combined solutions
VAL-CP-RCD-3S/40/0.03
Order No. 2882802
VAL-CP-RCD-3S/40/0.3/SEL
Order No. 2808001
Nominal voltage UN: 230/400 … 240/415 V AC
Nominal load current IL: 40 A
Dimensions (W x H x D): 120 mm x 90 mm x 75 mm
m
4m
mm
1.5
11
13
72
The integrated arrester backup fuses of the VAL-CP-MCB ensure the maximum
utilization of the performance capabilities of the surge protection. Their use is
not dependent on the operating current fuses in the system – faults relating to
the safeguarding of surge protection are therefore prevented.
PHOENIX CONTACT 13
Type 3 device protection
mm
mm
.7
.4
17
35
PLT-SEC-T3-3S-230-FM PLT-SEC-T3-230-FM
230 V / 400 V 230 V
Order No. 2905230 Order No. 2905229
PLT-SEC-T3-120-FM
120 V
Order No. 2905228
PLT-SEC-T3-60-FM
60 V
Order No. 2905225
PLT-SEC-T3-24-FM
24 V
Order No. 2905223
Voltage protection level Up: L-N / L(N)-PE ≤ 1.4 kV/≤ 1.5 kV ≤ 1.35 kV/≤ 1.5 kV ≤ 850 V/≤ 950 V ≤ 480 V/≤ 900 V ≤ 250 V/≤ 650 V
14 PHOENIX CONTACT
Type 3 device protection
230 V
26.2 mm
mm
mm
.9
.9
42
42
BT-1S-230AC/A BT-1S-230AC/O
230 V Order No. 2803409 Order No. 2800625
BLT-T2-320-UT BLT-T2-1S-320-UT
Order No. 2906100 Order No. 2906101
PHOENIX CONTACT 15
Surge protection for measurement
and control technology
Fast installation
Individual DIN rail connectors
can be converted into a bus.
This transmits the power
supply and status information.
Conventional wiring is not
used.
Variable connection
technology
Choose between the classic
screw connection or push-in
connection technology which
is even faster to wire.
16 PHOENIX CONTACT
Intelligent and systematic surge protection
OK
Overloaded, replacement
required
PHOENIX CONTACT 17
Surge protection with push-in and screw connection technology
Telecommunications
Push-in connection
2801246 PT-IQ-2X1+F-12DC-PT 2801245 PT-IQ-2X1-12DC-PT
Screw connection
2800781 PT-IQ-2X1+F-12DC-UT 2800780 PT-IQ-2X1-12DC-UT
18 PHOENIX CONTACT
Protection for one double wire Indirect grounding Direct grounding
Push-in connection
0 ... 10 V
0/4 ... 20 mA 2801254 PT-IQ-1X2+F-12DC-PT 2801253 PT-IQ-1X2-12DC-PT
Screw connection
2800975 PT-IQ-1X2+F-12DC-UT 2800793 PT-IQ-1X2-12DC-UT
Push-in connection
0 ... 10 V
0/4 ... 20 mA 2801262 PT-IQ-2X2+F-12DC-PT 2801261 PT-IQ-2X2-12DC-PT
Screw connection
2800985 PT-IQ-2X2+F-12DC-UT 2800984 PT-IQ-2X2-12DC-UT
PHOENIX CONTACT 19
Surge protection
for the Ex area
Benefit from all the advantages of the surge protection system, even in
the Ex area. You can monitor up to ten PT-IQ Ex surge protective devices
using a central controller.
Zone 1
An explosive mixture in the form of gas or
vapor is sometimes present.
20 PHOENIX CONTACT
Intelligent surge protection for the Ex area
One controller
for each of the
PT-IQ…EX…
protective devices
(maximum 10)
2800768 PT-IQ-PTB-UT
Standard signals
0 ... 10 V
0/4 ... 20 mA
2801512 PT-IQ-1X2-EX-24DC-UT
Standard signals
0 ... 10 V
0/4 ... 20 mA
2801513 PT-IQ-2X2-EX-24DC-UT
Necessary accessories: partition plates For flat DIN rails (7.5 mm) For isolated DIN rails
PHOENIX CONTACT 21
Pluggable surge protection – PLUGTRAB PT
Protection for
intrinsically safe PT 2xEX(I)-24DC-ST PT 2xEX(I)-BE
circuits, one or Order No. 2838225 + –
Order No. 2839279
two double wires
Protection for
temperature, 2, PT 4-24DC-ST PT 4+F-BE PT 4-BE
3 or 4-conductor Order No. 2839240 + Order No. 2839415 Order No. 2839402
measurements
Protection for
intrinsically safe
PT 4-EX(I)-24DC-ST PT 4-EX(I)-BE
circuits, 2, 3 or
Order No. 2839253 + –
Order No. 2839486
4-conductor
measurements
22 PHOENIX CONTACT
Signal circuits with common reference potential
PT 2x1-24DC-ST
Protection for Order No. 2856087
two conductors*, PT 2x1+F-BE PT 2x1-BE
e.g., binary + Order No. 2856142 Order No. 2856139
switching signals PT 2x1-24AC-ST
Order No. 2856100
PT 4x1-24DC-ST
Protection for Order No. 2838322
four conductors*, PT 4x1+F-BE PT 4x1-BE
e.g. binary + Order No. 2839376 Order No. 2839363
switching signals PT 4x1-24AC-ST
Order No. 2838351
PT 2x1VA-120AC-ST
Protection for Order No. 2839185
PT-BE/FM
high signal volt- + –
Order No. 2839282
ages* PT 2x1VA-230AC-ST
Order No. 2839198
Protection in the terminal block Protection directly at the measuring head The standard in the 6.2 mm class
The multi-stage surge protective devices for The surge protective devices for measuring heads. The The LINETRAB DIN rail modules protect up to 4 signal
protecting a double wire serve as fine and medium screw-on modules are available for all common standard paths simultaneously. 4-conductor measurements can
protection between the signal wires and as coarse signals. The extremely robust housing made from V4A be carried out in a limited amount of space. A DIN rail
protection between the signal wires and the ground. stainless steel protects against unwanted outages even in connector system is available for compact protection
With screw or spring connection and as version with rough industrial environments and is ready to be used in of interfaces with more than 4 signal wires. This allows
disconnect knifes. the Ex area. you to combine an unlimited number of protection
modules to create a single switching unit that can be
used in processes such as 6-conductor measurements.
PHOENIX CONTACT 23
Surge protection for
information technology
65 mm
1
levels and are networked over a wide area. or DIN rail module.
Surge voltages here quickly lead to large-
scale failures and, in the worst-case
25 mm
scenario, to data loss.
This selection guide helps you find the right
protection for your application quickly
Modular, small and easy
and easily – providing you with greater Protective plugs for
telecommunications and
availability. data distributors. The
COMTRAB product range
for LSA-PLUS disconnect
strips.
Numerous applications,
one solution
Solutions based on the
PLUGTRAB series provide
the ideal protection for
installation in the control
cabinet.
24 PHOENIX CONTACT
Information and data technology (bus systems)
PT 3-PB-ST PT 1X2-BE
PROFIBUS DP
Order No. 2858030 + Order No. 2856113
PROFIBUS PA
PT 2XEX(I)-24DC-ST PT 2XEX(I)-BE
Foundation
Order No. 2838225 + Order No. 2839279
Fieldbus
Ethernet
(incl. PoE)
- 100 Base T
- 1000 Base T
- 10G Base T
PROFINET
ETHERNET DT-LAN-19"-24
- 100 Base T Order No. 2838791
- 1000 Base T
DT-LAN-19“-16
TOKEN Ring Order No. 2880147
DT-UFB-485/BS
Order No. 2920612
DT-UFB-IB-RB0
INTERBUS Inline remote bus
Order No. 2800056
DT-UFB-IB-RBI
Order No. 2800055
High-speed data protection
The DATATRAB family represents
Accessories effective surge protection for high-
speed data transmission.
DT-LAN-CAT.6+ offers universal
FL CAT6 PATCH 0,5
RJ45 patch cable, length: 0.5 m protection without affecting the
Order No. 2891288
signal at network speeds of up to
FL CAT6 PATCH 3,0 10 Gbps.
RJ45 patch cable, length: 3 m
Order No. 2891686
PHOENIX CONTACT 25
Telecommunications
DT-TELE-SHDSL
SHDSL
Order No. 2801593
ISDN S0
CTM ISDN
ISDN S2M
Order No. 2838555
LSA-PLUS technology
26 PHOENIX CONTACT
Data technology (serial interfaces)
Data systems
PT 5-HF-12DC-ST PT 2X2+F-BE
RS-485
Order No. 2838775 + Order No. 2839224
RS-422A
DT-UFB-485/BS
RS-485
Order No. 2920612
Accessories
PHOENIX CONTACT 27
Surge protection
for transceiver systems
Shielding
Good shielding properties
are vital for clean
transmission. Robust
metal housings provide the
perfect shielding and are
suitable for use in harsh
environments.
Connection technology
The right connection
technology to suit the
application: F and N
connector, TV connector
and 7/16, UHF, BNC
connections.
Numerous applications,
one solution
Solutions based on the
PLUGTRAB series
provide the ideal
protection for installation
in the control cabinet.
28 PHOENIX CONTACT
Protection for transceiver technology
CN-UB-280DC-3-BB
Order No. 2801050
GPS or
GSM (900, 1800, 1900 MHz)
UMTS/3G (1.9 ... 2.2 GHz)
- With N connector
CN-UB-280DC-3-SB
Order No. 2801051
CN-LAMBDA/4-2.25-BB
GSM (900, 1800, 1900 MHz) Order No. 2801057
UMTS/3G (1.9 ... 2.2 GHz)
- Without supply voltage on the coaxial cable
- Very low voltage protection level
- With N connector CN-LAMBDA/4-2.25-SB
Order No. 2801056
C7/16-LAMBDA/4-2.25-BB
GSM (900, 1800, 1900 MHz) Order No. 2801060
UMTS/3G (1.9 ... 2.2 GHz)
- Without supply voltage on the coaxial cable
- Very low voltage protection level
- With 7/16 connector C7/16-LAMBDA/4-2.25-SB
Order No. 2801059
CN-LAMBDA/4-5.9-BB
WiMAX (2.4... 6 GHz) Order No. 2838490
or Industrial Wireless (2.4 GHz)
- Without supply voltage on the coaxial cable
- Very low voltage protection level
- With N connector CN-LAMBDA/4-5.9-SB
Order No. 2800023
Accessories
PHOENIX CONTACT 29
Protection for video monitoring systems
C-UFB- 5DC/E
50 ohms
Order No. 2782300
With BNC connection
C-UFB- 5DC/E 75
75 ohms
Order No. 2763604
PT 3-PB-ST
Order No. 2858030
For one video signal
PT 1X2+F-BE
Order No. 2856126
With screw connection
PT 2X2-HF- 5DC-ST
Order No. 2839567
For two video signals
PT 2X2-BE
Order No. 2839208
Satellite television
C-SAT-BOX
Upstream of the distributor Order No. 2880561
(multi-switch)
Satellite television
C-TV-SAT
Upstream of the SAT Order No. 2856993
receiver or television
Cable/terrestrial
television
C-TV/HIFI
Upstream of the television, Order No. 2857002
radio or tuner for the
hi-fi system
Accessories
30 PHOENIX CONTACT
Combined protection for TV and radio connections and the power supply
Satellite television
Used upstream of the SAT receiver or television with
simultaneous protection for the power supply.
Country: DE, AT, NL,
ES, SE
MNT-TV-SAT D
Order No. 2882284
MNT-TV-SAT D/WH
Order No. 2882297
MAINTRAB
MNT-...
MAINTRAB
MNT-...
PHOENIX CONTACT 31
CHECKMASTER 2 – The CHECKMASTER –
CHECKMASTER 2
Order No. 2905256
Robust case for industrial
environments
32 PHOENIX CONTACT
everything you need for testing
The test object is simply inserted All relevant components of the The tests must be documented in
into the associated test adapter protective plug are electrically accordance with IEC 62305.
and the test is started via the tested in an automatic test process. The CHECKMASTER 2 saves all
touch panel. The results of these tests are test results to the internal memory
shown on a color display: with mains failure protection.
Test adapter for the product • OK: The test reports are available via
ranges: The SPD has passed the test. USB stick for convenient further
FLT-CP, FLT-SEC, VAL-CP processing in Office programs.
• Warning:
and VAL-SEC The SPD has reached the
CM 2-PA-FLT/VAL-CP/SEC tolerance limit – replacement is
Order No. 2905283 recommended.
FLT-SEC-H • Defective:
CM 2-PA-SEC-HYBRID The SPD is defective –
Order No. 2907889 replacement is required.
PT and PLT-SEC
(17.5 mm wide)
CM 2-PA-PT/PLT
Order No. 2905284
VAL-MS
CM 2-PA-VAL-MS
Order No. 2905265 The top features at a glance:
CTM • Convenient, safe and fast testing
CM 2-PA-CTM • The "Tolerance limit is reached" test status prevents unnecessary
Order No. 2905282 service calls
PT 4-PE and PLT-SEC 3S • Automatic log function for test results
(35 mm wide) • The internal memory also enables subsequent processing of the test results
CM 2-PA-PT4/PLT3S on the computer
Order No. 2907019
• The update function always keeps the CHECKMASTER 2 up-to-date with
UFBK and UAK the latest developments (item database, firmware, language files)
CM 2-PA-PT/A
• A high level of investment security thanks to variable test adapters
Order No. 2907891
• Increased system availability, thanks to screening test
• IEC 62305-3-compliant testing
PHOENIX CONTACT 33
LM-S lightning monitoring system –
Optimum maintenance planning
34 PHOENIX CONTACT
Faraday effect as a reliable measuring method
PHOENIX CONTACT 35
Mains interference filters for
power supplies and measurement signals
36 PHOENIX CONTACT
Mains interference filters with 1 to 10 A rated load current
80 dB 80 dB
60 dB 60 dB
40 dB 40 dB
20 dB 20 dB
0 dB 0 dB
1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
100 dB 100 dB
80 dB 80 dB
60 dB 60 dB
40 dB 40 dB
20 dB 20 dB
0 dB 0 dB
1 kHz 10 kHz 100 kHz 1 MHz 10 MHz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
PHOENIX CONTACT 37
Combined mains interference filters with type 3 surge protection
80 dB
60 dB
40 dB
20 dB
0 dB
1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
38 PHOENIX CONTACT
TERMITRAB
Combination of mains interference filter and surge protection for
two signal wires with a shared reference potential.
asymmetrical 50 Ω
asymmetrical 150 Ω
100 dB
80 dB
60 dB
40 dB
20 dB
0 dB
1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
TT-ST-M-SFP-24AC TT-D-STTCO-BK
TERMITRAB
Order No. 2858946 Order No. 2858894
PHOENIX CONTACT 39
Always up-to-date, always available to you. Here you‘ll find everything on our products, solutions and service:
phoenixcontact.com
Product range
• Cables and wires • Industrial communication technology • Power supply units and UPS
• Connectors • Industrial Ethernet • Protective devices
• Controllers • Installation and mounting material • Relay modules
• Electronics housings • Lighting and signaling • Sensor/actuator cabling
• Electronic switchgear and • Marking and labeling • Software
motor control • Measurement and control technology • Surge protection and interference filters
• Fieldbus components and systems • Modular terminal blocks • System cabling for controllers
• Functional safety • Monitoring • Tools
• HMIs and industrial PCs • PCB terminal blocks and • Wireless data communication
• I/O systems PCB connectors