Professional Documents
Culture Documents
Introduction..............................1
General List.............................2
Device Installation.....................3
Cable Connection.....................4
Screen Information...................5
Loading Filament......................6
Bed Leveling.............................7
Software Installation.................8
First Printing..............................9
Corrective Maintenance........10
Circuit Wiring..........................11
01/ 16 Parameters
Introduction Model CR-X
300*300*400mm
Printing Size
270X270X400mm(Dual Color)
9
15 Molding Tech. FDM
Nozzle Number 1
8
Slice Thickness 0.1mm-0.4mm
1
Nozzle Diameter 0.4mm
10 14 Precision ±0.1mm
Fliament 1.75mm PLA
2
File Format STL/OBJ/AMF
7
Working Mode Online or TF card offline
11 Creality Slicer/Cura/Repetier-
3 Slice Software
Host/Simplify3D
6
Input:100-240V 50/60Hz
Power Supply
Output: 24V
Total Power 480W
Bed Temp. ≤100℃
Nozzle Temp. ≤250℃
Resume Print Yes
Filament Detector No
Auto Leveing Yes
language
Yes
4 12
Selection
5 13 Windows XP/Vista//7/8/10
Operating System
MAC/Linux
1. Extruder 1(E1) 6. Power Socket 11. Y Limit Switch ≤180mm/s,Normal 30-
Printing Speed
2. Nozzle Kit 7. Z-axis Motor 12. Z Limit Switch 60mm/s
3. Touch Screen 8. Extruder 2(E2) 13. Larger Hand Twist Nut
4. TF Slot & USB Port 9. Fliament Holder 14. Platform
5. Power Switch 10. Coupling 15. X Limit Switch
16. X Stepper
02/
General List
Tool Box
2 TF Card & Reader 1 set 7 Filament Holder Tube 2 12 Spare Parts 2 set
0.4mm
5 1 10 USB Cable 1 *The list is for reference, subject to the actual object.
Nozzle Cleaner
03/ M4X8
Device Installtion 4pcs 4pcs
M5X25 X-Axis Spacer M4 T-nut
X axis adjustment
100mm 100mm
M5X25
4pcs
04/
Cable Connection
Ribbon Cable
Z2
Z1
05/ Main
Menu Sub Menu
Screen Info.
Explanation
Screen Information
Stop
Fan(off\on)
Levelling
Automatic PLA\ABS(185°\220°)
Refuel
Nozzle Preheat
Moving Manual
Temp Hot-bed Preheat
Motor
Cooling yes\no
Printer Info
Fan (off\on)
Language
Please Click Numbers to Assist
Levelling
Levelling(①~⑤)
Preheat
Method 1、
Press and hold the extrusion clip, insert the filiment from the inlet
Method 2、
to the position with red line above the small pneumatic connector.
* Check and ensure that the filiment are on the position with the
red line above the small pneumatic fittings before each print to ensure,
otherwise, it will can cause plugging during printing.
07/
Bed Levelling
3 4
1 2
1. Double click to
install the software.
Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file
to TF card.
R-Click to merge models
2. Print
1
11/
Circuit Wiring
After- Sales Service
(3) Equipment failure or damage caused by unauthorized modification
Service of the equipment (private modification includes: 1. modification of
1, The printer can be returned within seven days, 15 days replacement, the nozzle assembly; 2. modification of the machine structure; 3. use
one year warranty, lifetime maintenance. of third-party components; 4. use of third-party firmware procedures
or change the original Factory firmware program, etc.);
Replacement requirement (4) Equipment failure or damage due to incorrect installation and use;
1. The appearance of the product is intact, without damage, scratches,
(5) Equipment failure or damage caused by the use of the equipment
smudges, cracks, deformation, etc.;
in a working environment not specified by the product;
2. Machine parts, tools and others are complete;
(6) Equipment failure or damage due improper use (beyond workload,
3. Provide a complete and valid purchase invoice and warranty, product etc.) or maintenance (moisture, etc.);
number should be the same.
(7) Equipment failure or damage due to the use of other branded
Warranty coverage components or low quality consumables.