Professional Documents
Culture Documents
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.fairchildsemi.com
LF353
Dual Operational Amplifier (JFET)
Features Description
• Internally trimmed offset voltage: 10mV The LF353 is a JFET input operational amplifier with an
• Low input bias current: 50pA internally compensated input offset voltage. The JFET input
• Wide gain bandwidth: 4MHz device provides wide bandwidth, low input bias currents and
• High slew rate: 13V/µs offset currents.
• High Input impedance: 1012Ω
8-DIP
8-SOP
Rev. 1.0.0
©2001 Fairchild Semiconductor Corporation
LF353
Schematic Diagram
(One Section Only)
2
LF353
Electrical Characteristics
(VCC =+15V, VEE= -15V, TA=25 °C, unless otherwise specified)
3
LF353
Mechanical Dimensions
Package
8-DIP
)
6.40 ±0.20
0.031
0.79
0.252 ±0.008
1.524 ±0.10
0.060 ±0.004
0.018 ±0.004
0.46 ±0.10
(
#1 #8
0.362 ±0.008
MAX
9.20 ±0.20
0.378
9.60
#4 #5
0.100
2.54
5.08 3.30 ±0.30
MAX 0.130 ±0.012
0.200
7.62
0.300 3.40 ±0.20 0.33
MIN
0.134 ±0.008 0.013
+0.10
0.25 –0.05
+0.004
0.010 –0.002
0~15°
4
LF353
Mechanical Dimensions
Package
8-SOP
0.1~0.25
MIN
0.004~0.001
1.55 ±0.20
0.061 ±0.008
)
0.022
0.56
(
#1 #8
0.194 ±0.008
MAX
4.92 ±0.20
0.202
5.13
0.016 ±0.004
0.41 ±0.10
#4 #5
0.050
1.27
6.00 ±0.30 1.80
0.236 ±0.012 MAX
0.071
0.006 -0.002
0.15 -0.05
MAX0.004
MAX0.10
3.95 ±0.20
+0.004
+0.10
0.156 ±0.008
8°
5.72
0~
0.225
0.50 ±0.20
0.020 ±0.008
5
LF353
Ordering Information
Product Number Package Operating Temperature
LF353N 8-DIP
0 ~ + 70°C
LF353M 8-SOP
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
www.fairchildsemi.com
Authorized Distributor
ON Semiconductor:
LF353MX LF353M LF353N LF353M_Q