Professional Documents
Culture Documents
52 Mitsubishi 1a km170 177 A4af3 PDF
52 Mitsubishi 1a km170 177 A4af3 PDF
Chart
Code Number on rear of case.
MITSUBISHI
Old Code New Code Case Type Transmission Type Notes
KM170 2 Piece 3 Spd Non L/Up Cast # 170-1 On Inside Rear Of Bell
KM171 2 Piece 3 Spd L/Up Cast # 171 On Rear Of Case
KM171-5 F3A21 2 Piece 3 Spd L/Up Cast # S-KM171 Or F3A21-S
KM172 2 Piece 3 Spd L/Up Cast # 175 On Rear Of Case
KM172-5 F3A22 2 Piece 3 Spd L/Up Cast # F3A22
KM175 2 Piece 4 Spd L/Up Cast # 175 On Rear Of Case
KM175-5 F4A22 2 Piece 4 Spd L/Up Cast # S-KM175 Or F4A22
KM176-5 F4A21 2 Piece 4 Spd L/Up Cast # KM176
KM177 2 Piece 4 Spd L/Up Cast # 177
KM177-8 F4A23 2 Piece 4 Spd L/Up Cast # 177 Or F4A23
F4A32 A4AF 1 Piece 4 Spd L/Up Cast # A4AF-1 Or A4AF-2 On Rear Of Case
F4A32 A4BF 1 Piece 4 Spd L/Up Cast # A4BF On Rear Of Case
F4A33 1 Piece 4 Spd L/Up Cast # F4A33EN, F4A33EV, F4A33EVS
F4A41 2 Piece 4 Spd L/Up Cast # F4A41
F4A42 2 Piece 4 Spd L/Up Cast # F4A42
F4A51 2 Piece 4 Spd L/Up Cast # F4A51
W4A32 1 Piece 4 Spd L/Up AWD Cast # W4A32
W4A33 1 Piece 4 Spd L/Up AWD Cast # F4A33, F4A33ENS Or W4A33
F5A51 2 Piece 5 Spd L/Up
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3
KM170 thru KM177-8 FWD 3 & 4 Speed
078 500 179
774 070 034 510 313 311 310 211* 046 555
520
750 318
530 036 228*
848
369
A 507
Pump
Parts Direct Drum
777
778
Pump Body Stator
Bell Hsg.
B Forward Hub
Forward Clutch
583
614 241 056 612 056 989 654 584 594 896
052 182 052 242 247
909
360
C 905
Servo
869
Rev. Sun Forward 907B
Sun Gear Low / Rev
Gear 366
Sprag Ring
Rear Planet 194
Gear 195
907 996
605 906 378
251 889 604 268 710 271 894 760
252 060 895 692
D
Drive
781
Case 326
347 010
437
Valve Body
42
7.4 JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru KM177-8
565
046 337 965 975 879 126 106 146 878* 229 670
336 230 181 554 177 358
A
Input Shaft
567
622 022 885* 630 044 339 967 857 977 893 155 114 134 154
338
MITSUBISHI
B
349
994
493 410
436 995 991
Neutral Switch
C
Park Pawl
Linkage
560
041 675 220 570 861* 140 100 120 862 970 960 550 185 083 304 762 780
214 863 330 331 223
D
O.Dr. Hub
O.Dr. Drum
O.Dr. Clutch
O.Dr. Cover
730 274 273 273 274 712 796 375 686 687
275
Pinion
Driven
715
716 720 292 291 076 284 283 282 714 282 283 679 374
693
E
076 288 289
717
Diff.
Idler
Parts
Differential
786
42
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.5
A4AF3 / A4BF2 FWD 4 Speed
500 179 565
070 034 510 313 520 311 310 211* 046 555 046 337 965 975 879
530 036 228* 336
A
507
Pump
Parts Direct Drum
777
778
Pump Body Stator
567
149 106 128 146 878* 574 251 622 022 885* 630 044 339 967 857 977 893
MITSUBISHI
B
Forward
Hub Shell / Kickdown 386
Forward Clutch Kickdown
Drum Center Support
Band
717 715
436
436L 716 720 292 348 725 076
758 Diff. 289
370 Parts 076
303
C 774
410
760
604
060 268-1 692 268 268-1 710 796 041 675 219 220 570
268
D
O.Dr. Hub
Drive
494 761
493
Case 906 420
Parts 326
907
010
E 905 195
347
Servo 342
194 300
437
195 765
907B
42
7.6 JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 4 Speed A4AF3 / A4BF2
126 106 146 878* 229 670 564 231
335 334
230 181 554 177 358 964 974 877 881
A
Input Shaft
583
155 114 134 154 614 241 056 612 056 989 251 889
654 584 594
MITSUBISHI
052 182 052 242 247 252
B
Rev. Sun Forward
Sun Gear Low / Rev
Gear
Sprag Ring
Rear Planet
Gear
Low / Reverse Clutch
712
730 274 273 898 281 280 796
275
C
Pinion
771 375 686
Driven
560 762
140 100 120 862 970 960 185
550 083 304
214 330 331 223
861*
O.Dr. Drum
Spacer O.Dr. Clutch
O.Dr. Cover
Plate
992
349
991 994
995
Park Pawl
Linkage
42
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.7
A4AF1 / AFAF2 / A4BF1 FWD 4 Speed
500 179 565
070 034 510 313 520 311 310 211* 046 555 046 337 965 975 879
530 036 228* 336
A
507
Pump
Parts Direct Drum
777
778
Pump Body Stator
567
149 106 128 146 878* 574 251 622 022 885* 630 044 339 967 857 977 893
MITSUBISHI
B
Forward
Hub Shell / Kickdown 386
Forward Clutch Kickdown
Drum Center Support
Band
436L 715
436 717
C 370 758
Diff.
289
716 720 292
076
Parts
303
774 410
760
369 Differential
786
726
794
605
604 268 710 271 894
895 692 219
Drive 781
761
Case
Parts
906 437 326
420
494 493
907
010
195 765
907B
360 896
909 741
V.B. 779
896
Valve Body Parts
42
7.8 JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 4 Speed A4AF1 / AFAF2 / A4BF1
126 106 146 878* 229 670 564 231
335 334
230 181 554 177 358 964 974 877
A
Input Shaft
583
155 114 134 154 614 241 056 612 056 989 251 889
654 584 594
MITSUBISHI
052 182 052 242 247 252
B
Rev. Sun Forward
Sun Gear Low / Rev
Gear
Sprag Ring
Rear Planet
Gear
Low / Reverse Clutch
712
730 274 273 273 274 796
275
762
C
Retainer
Pinion
Driven
560
861* 185
140 100 120 550 083
041 675 862 970 960
220 570
214 863 330 331 223
D
O.Dr. Hub
O.Dr. Drum
O.Dr. Clutch
O.Dr. Cover
992
349
E
991 994
995
Park Pawl
Linkage
42
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.9
F4A33/W4A32/W4A33 FWD 4 Spd
231
B
Forward
Hub Shell / Kickdown
Forward Clutch Kickdown
Drum
583 Band
614 241 056 612 056 989 654 584 594
182
052 052 242 247
896
909
360
C 896
Forward 494 493
Rev. Sun Low / Rev 907B
Gear Sun Gear 366 905
Sprag
Rear Planet Ring 194 Servo
Gear 195
605 078 760 907
251 889 604 268 710 271 895 774
894 906
252 060 757 374
692 219
848
781
369
D
Drive
992
437
Case
E 349
758 303 347
326
991
436
010
420
342
741
F 995 V.B.
300
Parts
740
765
994
Park Pawl Linkage 779
42
7.10 JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 4 Spd F4A33/W4A32/W4A33
A
Input Shaft
Forward Drum
Direct Clutch
567
885* 630 044 339 338 967 857 977 893 155 114 134 154
MITSUBISHI
B
386
Center Support Low / Reverse Clutch
560 304 762
041 675 220 570 861* 140 100 120 862 970 960 550 083 780
214 863 330 331 185 223
O.Dr. Hub
O.Dr. Drum
O.Dr. Clutch O.Dr. Cover
Idler D
Differential
717 786
787
273 274 730 281 280 275* 375 735
726 Diff.
794
Parts
Pinion
E
F4A33
273 730 273 734 719 290* 728 718 712 280 375 735
677 274 274 276* 297 296 281 275* 787
F
Pinion
Differential
W4A32 / W4A33
42
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.11
KM170 thru W4A33 FWD 3 & 4 Speed
PART # PAPER & RUBBER KIT QTY. REFERENCE #
7.3b JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
PART # FILTER QTY. REFERENCE #
MITSUBISHI
42010A 42010AA 42010E 42010EA
42022A............Band, KM170/KM171/KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/A4AF1/A4AF3
........................(1 9/16” Wide)..................................................................................................................................1....................... MD725287
42022G............Band, KM177/KM177-8/A4BF1/A4BF2/W4A32 (1 3/4” Wide) 1987-Up..........................................1....................... MD721408
42022M...........Band, F4A33/W4A33 Kickdown (2 3/8” Wide) 1990-Up..................................................................1....................... MD736920
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3c
KM170 thru W4A33 FWD 3 & 4 Speed
PART # BUSHINGS (Continued) QTY. REFERENCE #
42100C............Friction, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/F4A33/W4A32/W4A33
........................Overdrive Clutch (.074”) (40 Teeth) 1985-Up................................................................................. 3-4...................... MD739092
A42100CAPPK..Friction & Steel Kit, All KM Series Overdrive Clutch (Contains; 4 Red .059” Frictions,
........................& 4 Kolene .047” Steels) (Alto).........................................................................................................1....................... 59757
42100L.............Friction, A4AF3 Overdrive Clutch (.065”) (36 Teeth) 2000-Up....................................................... 3-4......................
42106A............Friction, KM171/KM172 Forward Clutch (.075”) (10 Teeth) 1982-88............................................. 2-3...................... MD714345
42106B............Friction, KM170/KM171/KM172/KM175/KM177 Forward & Direct Clutch (.075”) (38 Teeth)
........................(5.000”OD) 1979-88....................................................................................................................... 4-6...................... MD713655
42106E............Friction, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32
........................Forward & Direct Clutch (.075”) (38 Teeth) (4.996”OD) 1989-Up.................................................. 4-6...................... MD722555
42106L.............Friction, A4AF3/A4BF2/A4BF3 Forward Clutch (.066”) 38 Teeth (Eclipse) 2000-Up..................... 4-6......................
42106M...........Friction, F4A33/W4A33 Direct Clutch (.067”) (38 Teeth) (5 7/16”OD) 1990-Up...............................4....................... MD735828
42106MC.........Friction, F4A33/W4A33 Forward Clutch (.067”) (42 Teeth) (5 7/16”OD) 1990-Up...........................5....................... MD731582
42114B............Friction, KM170/KM171/KM172/KM175 Low/Reverse Clutch (.072”) (48 Teeth) 1979-88............. 4-6...................... MD728108
42114E............Friction, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32
........................Low/Reverse Clutch (.071”) (51 Teeth) 1987-Up.............................................................................6....................... MD719833
42114L.............Friction, A4AF1/A4BF2/A4BF3 Low/Reverse Clutch (.071”) 51 Teeth (Eclipse) 2000-Up............. 5-6......................
42114M............Friction, F4A33/W4A33 Low/Reverse Clutch (.067”) (54 Teeth) (6 1/4”OD) 1990-Up................... 5-6...................... MD731586
42119E............Friction Module, KM175-5/KM176-5/KM177-8/A4AF1/A4AF2/A4BF1/W4A32 1988-Up.................1.......................
42119H............Friction Module, KM171-5/KM172-5 1988-Up..................................................................................1.......................
42119LD..........Friction Module, A4AF3/A4BF2/A4BF3 2000-Up.............................................................................1.......................
42119M............Friction Module, F4A33/W4A33 1990-Up........................................................................................1.......................
42120C............Steel, KM175/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/F4A33/W4A32/W4A33
........................Overdrive Clutch (.032”) (25 Teeth) 1985-Up................................................................................. 3-4...................... MD712528
42120L.............Steel, A4AF3 Overdrive Clutch (.097”) 25 Teeth (3.770”ID) 1993-Up............................................ 3-4......................
42120LD..........Steel, A4BF Overdrive Clutch (.160”) 25 Teeth (3.770”ID) 2000-Up.............................................. 3-4......................
7.3d JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42126B............Steel, KM170/KM171/KM172/KM175/KM177 Direct Clutch (.150”) (24 Teeth) (3.970”ID)
........................1979-88 (This Is Also The Pressure Plate 42146B)....................................................................... 3-4...................... MD707256
42126E............Steel, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32
.......................Direct Clutch (.146”) (24 Teeth) (4.117”ID) 1989-Up (This Is Also The Pressure Plate 42146E)... 2-3...................... MD722559
42126G............Steel, F4A33 Direct Clutch (.120”) (24 Teeth) (4.117”ID) 1992-Up)............................................... 2-3...................... MD739509
42126M...........Steel, F4A33/W4A33 Direct Clutch (.088”) (26 Teeth) (4.115”ID) 1990-Up......................................3....................... MD739384
42126MB.........Steel, F4A33/W4A33 Direct Clutch (.150”) (26 Teeth) (4.115”ID) 1990-Up......................................1.......................
42128A............Steel, KM170/KM171/KM172/KM175/KM177 Forward Clutch (.071”) (24 Teeth)
........................(3.970”ID) 1979-88...........................................................................................................................2....................... MD707255
42128E............Steel, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Forward
........................Clutch (.071”) (24 Teeth) (4.100”ID) 1989-Up................................................................................ 2-3...................... MD722556
42128L.............Steel, A4AF3 Forward Clutch (.077”) 24 Teeth (4.100”ID) 1993-Up.........................................................................
42128LA..........Steel, A4AF1/A4AF2/A4BF1 Forward Clutch (.087”)(24 Teeth)(4.100”ID) 1999-Up........................1.......................
42128M...........Steel, F4A33/W4A33 Forward Clutch (.071”) (26 Teeth) (4.360”ID) 1990-Up.................................5....................... MD731604
42134A............Steel, KM170 Low/Reverse Clutch (.071”) (6 Teeth) (5.00”ID) 1979-81..........................................3....................... MD707401
42134B............Steel, KM171 Low/Reverse Clutch (.071”) (12 Teeth) (5.00”ID) 1982-84........................................3....................... MD707425
42134BB..........Steel, KM172/KM175/KM177 Low/Reverse Clutch (.039”) (24 Teeth) (5.00”ID) 1984-88...............5....................... MD704948
MITSUBISHI
42134BC.........Steel, KM171/KM172/KM175 Low/Reverse Clutch (.071”) (24 Teeth) (5.00”ID) 1985-88...............3....................... MD715438
42134E............Steel, KM172-5/KM175-5/KM176-5/KM177-8/A4AF3 Low/Reverse Clutch (.039”)
........................(20 Teeth) (5.300”ID) 1987-Up.........................................................................................................5....................... MD727798
42134H............Steel, KM171-5/KM176-5/A4AF1/A4BF1/A4BF2/W4A32 Low/Reverse Clutch (.071”)
........................(20 Teeth)(5.300”ID) 1989-Up..........................................................................................................3....................... MD727799
42134M...........Steel, F4A33/W4A33 Low/Reverse Clutch (.039”) (20 Teeth) (5.540”ID) 1990-Up........................ 4-5...................... MD731587
42134P............Steel, KM177 Low/Reverse Clutch (.039”) (24 Teeth) (5.300”ID) 1987-88......................................5....................... MD719834
42139E............Steel Module, KM175-5/177-8 1988-Up...........................................................................................1.......................
42139H............Steel Module, KM171-5/172-5 1988-Up...........................................................................................1.......................
42139M...........Steel Module, F4A33/W4A33 1990-Up............................................................................................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3e
KM170 thru W4A33 FWD 3 & 4 Speed
PART # VALVE BODY KITS QTY. REFERENCE #
42211B............Washer, All KM Series Stator To Direct Drum (.055”) Fiber (Also Fits Forward Drum To
........................Direct Drum)................................................................................................................................... 1-2......................
42211BA..........Washer, All KM Series Stator To Direct Drum (.070”) Fiber.............................................................1.......................
42211BB..........Washer, All KM Series Stator To Direct Drum (.086”) Fiber.............................................................1.......................
42211BC..........Washer, All KM Series Stator To Direct Drum (.100”) Fiber.............................................................1.......................
42211BD..........Washer, All KM Series Stator To Direct Drum (.118”) Fiber..............................................................1.......................
S42211K..........Washer & Shim Kit, All Km Series Stator To Drums (Sonnax).........................................................1.......................
42214C............Washer, KM175 Hub To Overdrive Drum (4 Tab) (1.415”OD)..........................................................1.......................
42214E............Washer, KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32 Hub To Overdrive Drum
........................(4 Tab) (1.490”OD)...........................................................................................................................1....................... MD-734101
42214L.............Washer, A4AF3 Hub To Overdrive Drum (.079” Thick) No Tabs (1.008”ID) (1.415”OD)..................1.......................
42214M...........Washer, F4A33/W4A33 Hub To Overdrive Drum (4 Tab) (1.500”OD)..............................................1.......................
42220C............Washer, KM175 Overdrive Hub Front With (1 Tab) (.072”)..............................................................1....................... MD715877
42220E............Bearing With Race, KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/W4A32/W4A33 Overdrive
........................Hub (Front).......................................................................................................................................1.......................
42220L.............Bearing W/Race & Cup Race, A4BF1/A4BF2 Overdrive Hub (Front) .109” Thick (1.669”OD)
........................1.108”ID (Cup Race Has 6 Flat Sides) 2 Piece Set (Sell A 42220LK Per ATRA).............................1.......................
42220LA..........Shim, A4BF1/A4BF2 Overdrive Hub (Front) (.015” Thick)(Use With 42220L Bearing To Correct
........................Inplay, Per ATRA)(Sell 42220LK Per Atra).......................................................................................1.......................
42220LK..........Kit, A4BF1A4BF2 Overdrive Hub (Front) Contains: 42220L, 42220LA & 42056E...........................1.......................
42220P............Bearing W/Race, KM177 Overdrive Hub (Front)..............................................................................1.......................
42223C............Ball Bearing, KM175-KM177 Overdrive Drum To Overdrive Cover (1.118”OD)
........................(11/16”ID) 1985-88...........................................................................................................................1.......................
42223E............Ball Bearing, KM175-8/KM176-5/KM177-8/A4AF1/F4A33/W4A32/W4A33 Overdrive Drum To
........................Overdrive Cover (1.122”OD) (1/2”ID) 1989-95.................................................................................1.......................
42223L.............Ball Bearing, A4AF3/A4BF1/A4BF2 Overdrive Drum To Overdrive Cover (1.181”OD) (.671”ID)....1.......................
42228B............Race, All KM Series Forward Drum To Stator (.030”)......................................................................1.......................
42228BA..........Race, All KM Series Forward Drum To Stator (.046”)......................................................................1.......................
42228BAA.......Race, All KM Series Forward Drum To Stator (.055”)......................................................................1.......................
42228BB..........Race, All KM Series Forward Drum To Stator (.062”)......................................................................1.......................
7.3f JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42228BBB.......Race, All KM Series Forward Drum To Stator (.070”)......................................................................1.......................
42228BC.........Race, All KM Series Forward Drum To Stator (.078”)......................................................................1.......................
42229B............Bearing With Race, All KM Series Forward Drum To Stator............................................................1.......................
42230B............Washer, All KM Series Forward Drum To Direct Drum (2 3/4”OD) (.055”) (Use 42211B)................1.......................
42230M...........Washer, F4A33/W4A33 Forward Drum To Direct Drum (2 9/16”OD)...............................................1.......................
42231B............Race, KM170/KM171 Forward Drum To Hub (1 3/8”OD).................................................................1.......................
42231C............Race, KM172/KM175 Forward Drum To Hub (1 9/16”OD) (3/4”ID).................................................1.......................
42231E............Race, KM171-5/KM172-5/KM176-5/A4AF1/A4AF3/A4BF1/A4BF2/F4A33/W4A32/W4A33
........................Forward Drum To Hub (1 9/16”OD) (13/16”ID).................................................................................1.......................
42232B............Bearing W/Race, KM170/KM171 Forward Drum To Hub.................................................................1.......................
42232C............Bearing W/Race, KM172/KM175 Forward Drum To Hub.................................................................1.......................
42232E............Bearing W/Race, KM171-5/KM172-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/F4A33/
........................W4A32/W4A33 Forward Drum To Hub............................................................................................1.......................
42234B............Race, All KM Series Forward Hub To Kickdown Drum (.060”).........................................................1.......................
42234C............Race, All KM Series Forward Hub To Kickdown Drum (.030”).........................................................1.......................
42234M...........Race, All KM Series Forward Hub To Kickdown Drum (.063”).........................................................1.......................
42241B............Bearing, KM170/KM171 Reverse Sun Gear To Forward Sun Gear (.880”ID)..................................1.......................
MITSUBISHI
42241C............Bearing, KM170/KM171 Reverse Sun Gear To Forward Sun Gear (1.030”ID)................................1.......................
42241E............Bearing, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32
........................Reverse Sun GearTo Forward Sun Gear (1.208”ID)........................................................................1.......................
42241M...........Race, F4A33/W4A33 Reverse Sun Gear To Forward Sun Gear (1.225”ID)....................................1.......................
42242C............Race, KM172/KM175 Reverse Sun Gear To Forward Sun Gear (1.028”ID)....................................1.......................
42242E............Race, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2/W4A32
........................Reverse Sun Gear To Forward Sun Gear (1.208”ID).......................................................................1.......................
42242M...........Bearing W/Race, F4A33/W4A33 Reverse Sun Gear To Forward Sun Gear...................................1.......................
42247B............Bearing, KM170/KM171/KM172/KM175-5/KM176-5/KM177-8/A4AF1/W4A32 Forward Sun Gear
........................To Planet (Stays In Planet)...............................................................................................................1.......................
42247D............Bearing, KM172/KM175 (Some) Forward Sun Gear To Planet........................................................1.......................
42247L.............Bearing W/Races, A4AF3/A4BF1/A4BF2 Forward Sun Gear To Planet (Stays In Planet)..............1.......................
42247M...........Bearing W/Race, F4A33/W4A33 Forward Sun Gear To Planet (Stays In Planet)...........................1.......................
42248D............Race, KM172/KM175 (Some) Forward Sun Gear To Planet............................................................1.......................
42251B............Bearing W/Race, KM170/KM171 Planet To Output Hub (1.805”OD) (Also Forward Hub To
........................Kickdown Drum)............................................................................................................................. 1-2......................
42251C............Bearing W/Race, KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/A4AF1 Planet To
........................Output Hub (2.045”OD) (Also KM172/KM171-5/KM172-5/KM175-5/KM176-5/A4AF1/A4AF3/
........................A4BF1/A4BF2 Forward Hub To Kickdown Drum).......................................................................... 1-2......................
42251G............Bearing W/Race, KM177-8/F4A33/W4A33 Planet To Output Hub (2.128”OD) (Also
........................Forward Hub To Kickdown Drum).................................................................................................. 1-2......................
42251L.............Bearing W/Races, A4BF3/A4BF1/A4BF2 Planet To Hub (.142” Thick)(2.100”OD)..........................1.......................
42252B............Race, KM170/KM171 Planet To Output Hub (1.455”ID)..................................................................1.......................
42252C............Race, KM175/KM171-5/KM172-5 Planet To Output Hub (1.528”ID)................................................1.......................
42268B............Ball Bearing, KM170/KM171/KM171-5 Drive Gear (Front) (1.358”ID).............................................1.......................
42268C............Ball Bearing, KM172/KM175 Drive Gear (Front) 1.575”ID (2.830”OD)............................................1.......................
42268E............Ball Bearing, KM175-5/KM176-5/KM177-8 Drive Gear (Front) 1.770”ID.........................................1.......................
42268L.............Ball Bearing, A4AF1/F4A33/W4A32/W4A33 Drive Gear (Front) 2.365”ID.......................................1.......................
42268LB..........Double Ball Bearing, A4AF3/A4BF2 Drive Gear (Front)(With 4 Bolt Flange)(2.045”ID)
........................(4.109”OD With Flange)...................................................................................................................1.......................
42268LC..........Ball Bearing, A4AF1 Drive Gear (Front)(2.165”ID)...........................................................................1.......................
42268Y............Ball Bearing, KM172-5 Drive Gear (Front) 1.575”ID (3.145”OD).....................................................1.......................
42271B............Ball Bearing, KM170/KM171/KM171-5 Drive Gear (Rear) 1.175”ID................................................1.......................
42271C............Ball Bearing, KM172/KM175 Drive Gear (Rear) 1.375”ID................................................................1.......................
42271E............Ball Bearing, KM175-5/KM176-5/KM177-8 Drive Gear (Rear) 1.572”ID..........................................1.......................
42271L.............Ball Bearing, A4AF1/F4A33/W4A32/W4A33 Drive Gear (Rear) 2.165”ID.......................................1.......................
42271LC..........Ball Bearing, A4AF1/A4AF2 Drive Gear (Rear)(1.930”ID)...............................................................1.......................
42271Y............Ball Bearing, KM172-5 Drive Gear (Rear) 1.575”ID.........................................................................1.......................
42273B............Cup Race, KM170/KM171/KM172/KM175/KM171-5/KM172-5 Pinion To Case & Driven
........................Transfer Gear To Case................................................................................................................... 1-2......................
42273E............Cup Race, KM175-5/KM176-5/KM177-8 Pinion To Case & Driven Transfer Gear To Case.......... 1-2......................
42273L.............Cup Race, A4AF1/A4AF3/A4BF1/A4BF2 Pinion To Case (2.840”OD)............................................1.......................
42273M...........Cup Race, F4A33/W4A32/W4A33 Pinion To Case & Driven Transfer Gear To Case
........................(Cast # 322009J)............................................................................................................................ 1-2......................
42273MA.........Cup Race. F4A33 Pinion To Case & Driven Transfer Gear To Case (Cast # 57583-N)................. 1-2......................
42274B............Cone Bearing, KM170/KM171/KM172/KM175/KM171-5/KM172-5 Pinion & Driven
........................Transfer Gear................................................................................................................................. 1-2......................
42274E............Cone Bearing, KM175-5/KM176-5/KM177-8/A4AF/F4A33/W4A32/W4A33 Pinion & Driven
........................Transfer Gear................................................................................................................................. 1-2......................
42274L.............Cone Bearing, A4AF1/A4AF3/A4BF1/A4BF2 Pinion Shaft (17 Rollers)(1.375”ID)..........................1.......................
42275E............Shim, KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/A4BF1/A4BF2 Pinion Shaft To Driven
........................Transfer Gear (.062”).......................................................................................................................1.......................
42280L.............Cone Bearing, A4AF3/A4BF1/A4BF2 Transfer Drive Gear (19 Rollers)(1.770”ID)..........................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3g
KM170 thru W4A33 FWD 3 & 4 Speed
PART # WASHERS & BEARINGS (Continued) QTY. REFERENCE #
7.3h JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42420CK.........Solenoid Kit, KM 4 Speed (4 Solenoid)(With Wire Harness)(All Hyundai 1985-Up
........................ & Mitsubishi 1987-92).....................................................................................................................1.......................
T42420CK-1....Solenoid Master Kit, KM 4 Speed (With Wire Harness) (Teckpak) (All Hyundai 1985-Up &
........................Mitsubishi 1987-92)..........................................................................................................................1.......................
42420EK..........Solenoid Kit, All KM 4 Speed (With 4 Solenoids) With 13 OHM Lock-Up Solenoid
........................(For Mitsubishi 1993-Up)(Includes The F4A33)(These Are Flat Nose Solenoids But They Fit
........................The Solenoids With Long Snouts)....................................................................................................1.......................
T42420EK-1....Solenoid Master Kit, KM 4 Speed )4 Solenoid)(With Wire Harness)(For Mitsubishi 1993-Up
........................Not For Hyundai)(Teckpak)..............................................................................................................1.......................
42420LD..........Solenoid Assembly, A4AF3 (6 Solenoids With Case Connector) 2000-Up......................................1.......................
42420MC.........Solenoid Assembly, F4A33 (Diamante, 3000GT, Expo, Gallant) 1990-92.......................................1....................... MD734199
42420MD.........Solenoid Assembly, F4A33 (Mitsubishi, Eclipse) 1991-92...............................................................1....................... MD-755009
42420MG.........Solenoid Assembly, F4A33 (Mitsubishi, Eclpise) 1993-94...............................................................1....................... MD-755008
42420MH.........Solenoid Assembly, F4A33 1993-96................................................................................................1....................... MD-754832
42421C............Solenoid, KM 4 Speed 1-2 Shift (Orange Wire) 1987-97.................................................................1.......................
42421CA..........Solenoid, KM 4 Speed 3-4 Shift (Yellow Wire) 1987-97...................................................................1.......................
42425E............Solenoid, KM Series TCC (Red Wire) 1987-93................................................................................1.......................
MITSUBISHI
42425EA..........Solenoid, KM Series TCC (Lock-Up) (White Wire) 1993-Up............................................................1.......................
42425EB..........Solenoid, KM Series EPC (Blue Wire) 1987-97...............................................................................1.......................
42431E............Solenoid, KM175-5/KM177-5 EPC...................................................................................................1.......................
42436B............Switch, KM171/KM172/KM175 Pulse Generator (Speed Sensors).................................................1.......................
42436E............Switch, KM171-5/KM175-5/KM176-5 Pulse Generators (Speed Sensors)......................................1.......................
42436G............Switch, KM177-8 Pulse Generator (Speed Sensor).........................................................................1.......................
42436LB..........Switch, A4AF3/A4BF1/A4BF2 Pulse Generator (Speed Sensors)...................................................1.......................
42436M...........Switch, F4A33/W4A33 Pulse Generator (Speed Sensors)..............................................................1.......................
42436P............Switch, KM177 Pulse Generator......................................................................................................1.......................
42437J.............Sensor, KM175-5/F4A22 Oil Temperature (TOT) 1989-95...............................................................1.......................
42437L.............Sensor, A4AF1/A4AF2/A4BF2/A4BF3/F4A32 Oil Temperature (TOT) 1993-99..............................1.......................
42437M...........Sensor, F4A33/W4A33 Oil Temperature (Brass).............................................................................1.......................
42437MA.........Sensor, F4A33/W4A33 Oil Temperature (TOT) (Plastic) 1991-99...................................................1.......................
42440C............Switch, KM175/KM177 Kickdown Servo 1985-88............................................................................1.......................
42440E............Switch, KM175-5/KM177-8 Kickdown Servo 1989-Up.....................................................................1.......................
42440J.............Switch, KM176-5 Kickdown Servo...................................................................................................1.......................
42440M...........Switch, F4A33/W4A33 Kickdown Servo..........................................................................................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3i
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
42510B............Pump Body W/Gears, KM171/KM172/KM175 Non Vented (Use With Vented Case) 1983-88........1.......................
42510BA..........Pump Body W/Gears, KM171/KM172/KM175 Vented (Use With Non Vented Case) 1983-88........1.......................
42510E............Pump Body W/Gears, KM171-5/KM175-5/KM176-5/KM177-8 1988-Up.........................................1.......................
42510L.............Pump Body W/Gears, A4AF1/ A4BF1 (13 Teeth Inner Pump Gear) 1991-99 .................................1.......................
42510LC..........Pump Body W/Gears, A4AF3 / A4BF2 (11 Teeth Inner Pump Gear) 2000-Up.................................1.......................
42510M...........Pump Body W/Gears, F4A33/W4A32/W4A33 1990-Up..................................................................1.......................
42510Y............Pump Body W/Gears, KM172-5 1989-Up........................................................................................1.......................
42520B............Stator, KM171/KM172/KM175 (With 3 Ring Input Shaft) Use With Vented Case 1983-88..............1.......................
42520BA..........Stator, KM171/KM172/KM175 (With 3 Ring Input Shaft) For Non Vented Case) 1983-88..............1.......................
42520E............Stator, KM175-5/KM172-5 (With 3 Ring Input Shaft) 2 Bushing Direct Drum 1988-Up...................1.......................
42520G............Stator, KM177-8 (With 1 Ring On Input Shaft) 2 Bushing Direct Drum 1989-Up.............................1.......................
42520H............Stator, KM171-5/KM176-5 (With 3 Rings On Input Shaft) 1 Bushing Direct Drum 1989-Up............1.......................
42520HA..........Stator, KM171-5 (With 1 Ring On Input Shaft) 1 Bushing Direct Drum 1989-Up.............................1.......................
42520L.............Stator, A4AF1 (1 Bushing Direct Drum) 1991-99 (Ring Tower Measures 1 5/8”
MITSUBISHI
7.3j JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42555E............Drum, KM175-5/KM177-8/A4BF1 Direct (3 Clutch) 1 5/8” Tall (2 Bushing) 1988-Up......................1.......................
42555H............Drum, KM171-5/KM176-5/A4AF Direct (2 Clutch) 1 Bushing (12 Lugs) 1989-Up...........................1.......................
42555M...........Drum, F4A33/W4A33 Direct (4 Clutch) 2 Bushings 1990-Up..........................................................1.......................
42555L.............Drum, A4AF3 Direct Clutch (2 Clutch)(1.325” Tall)(1 Bushing 5/16” Wide)(Lugs Are 1/4” Down
........................From The Top Of Drum) 2000-Up....................................................................................................1.......................
42555LA..........Drum, A4BF3 Direct Clutch (3 Clutch)(1.550” Tall)(1 Bushing 1/2” Wide)(Lugs Are 1/2” Down
........................From The Top Of Drum) 2000-Up....................................................................................................1.......................
42555LE..........Drum, A4BF3 Direct Clutch (2 Clutch)(1.325” Tall)(1 Caged Needle Bearing Inside Instead
........................Of A Bushing)...................................................................................................................................1.......................
42555M...........Drum, F4A33/W4A33 Direct (4 Clutch)(2 Bushing) 1990-Up...........................................................1.......................
42555Y............Drum, KM172-5 Direct (3 Clutch) 1 1/2” Tall (2 Bushing) 1989-Up..................................................1.......................
42560C............Piston Kit, KM175 Overdrive Clutch 1985-89...................................................................................1.......................
42560E............Piston Kit, KM175-5/KM176-5/A4AF Overdrive Clutch (Cast # D) 1988-Up....................................1.......................
42560G............Piston Kit, KM177-8/A4BF1/A4BF2 Overdrive Clutch (Cast # E) 1989-Up (Steel Piston)...............1.......................
42560LB..........Piston Kit, A4AF3 Overdrive Clutch (Aluminum Piston)...................................................................1.......................
42560M...........Piston Kit, F4A33/W4A32/W4A33 Overdrive Clutch (Cast # C) 1990-Up........................................1.......................
42564B............Piston Kit, KM171/KM172 Forward Clutch 1983-88.........................................................................1.......................
MITSUBISHI
42564C............Piston Kit, KM175 Forward Clutch 1985-89.....................................................................................1.......................
42564E............Piston Kit, KM175-5/KM176-5/KM177-8/A4AF1/A4BF1 Forward Clutch 1988-Up..........................1.......................
42564H............Piston Kit, KM171-5/KM172-5 Forward Clutch 1989-Up..................................................................1.......................
42564L.............Piston Kit, A4AF3 Forward Clutch....................................................................................................1.......................
42564M...........Piston Kit, F4A33/W4A33 Forward Clutch 1990-Up........................................................................1.......................
42564N............Piston Kit, W4A32 Forward Clutch 1991-Up....................................................................................1.......................
42565B............Piston Kit, KM171/KM172 Direct Clutch (4.500”OD Piston) 1983-88..............................................1.......................
42565BA..........Piston Kit, KM171/KM172 Direct Clutch (5.000”OD Piston) 1983-88..............................................1.......................
42565C............Piston Kit, KM175 Direct Clutch 1985-89.........................................................................................1.......................
42565E............Piston Kit, KM175-5/W4A32/A4BF1/A4BF2 Direct Clutch 1988-Up................................................1.......................
42565H............Piston Kit, KM171-5/KM176-5/A4AF1 Direct Clutch 1989-Up.........................................................1.......................
42565L.............Piston Kit, A4AF3 Direct Clutch (Piston Cast #45490-22700)..........................................................1.......................
42565M...........Piston Kit, F4A33/W4A33 Direct Clutch 1990-Up............................................................................1.......................
42565Y............Piston Kit, KM172-5 Direct Clutch 1989-Up.....................................................................................1.......................
42567B............Piston Kit, KM171 Center Support (Low/Reverse Clutch) 1983-88.................................................1.......................
42567C............Piston Kit, KM172/KM175 Center Support (Low/Reverse Clutch) 1983-89.....................................1.......................
42567E............Piston Kit, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/W4A32 Center Support (Low/Reverse
........................Clutch) 1988-Up...............................................................................................................................1.......................
42567H............Piston Kit, KM171-5/KM176-5/A4AF1/A4AF3/F4A32 Center Support (Low/Reverse Clutch)
........................1989-Up...........................................................................................................................................1.......................
42567M...........Piston Kit, F4A33/W4A33 Center Support (Low/Reverse Clutch) 1990-Up.....................................1.......................
42570C............Clutch Hub, KM175 Overdrive (2 Clutch) 26 Splines 1985-89.........................................................1.......................
42570E............Clutch Hub, KM171-5/KM176-5/A4AF1/(A4BF1/A4BF2 Some) Overdrive (3 Clutch)(27 Splines)
........................(4.030”OD)(40 Teeth Clutch Hub) 1980-Up.....................................................................................1.......................
42570G............Clutch Hub, KM177-8/W4A32 Overdrive (4 Clutch) 27 Splines (.930” Tall) 1989-Up......................1.......................
42570L.............Clutch Hub, A4AF3 (A4BF1/A4BF2 Some) Overdrive (4 Clutch)(3.660”OD)(36 Teeth Clutch
........................Hub) 2000-Up...................................................................................................................................1.......................
42570M...........Clutch Hub, F4A33/W4A33 Overdrive (4 Clutch) 40 Teeth (4.030”OD)1990-Up.............................1.......................
42574B............Clutch Hub, KM171 Forward (10 Teeth) 1983-88............................................................................1.......................
42574BA..........Clutch Hub, KM171 Forward (38 Teeth) 1983-88............................................................................1.......................
42574C............Clutch Hub, Km172/KM175 Forward (38 Teeth) 1983-89................................................................1.......................
42574E............Clutch Hub, KM172-5/KM177-5/Some KM177-8/A4BF1/A4BF2/W4A32 Forward (38 Teeth)
........................1988-Up...........................................................................................................................................1.......................
42574G............Clutch Hub, Some KM177-8 Forward (38 Teeth) With 4.060”OD At Friction Splines......................1.......................
42574H............Clutch Hub, KM171-5/KM176-5/A4AF Forward (38 Teeth) 1989-Up...............................................1.......................
42574L.............Clutch Hub, A4BF2 Forward (38 Teeth)(5 Clutch)(1.510” Overall Height)(.960”Thick At
........................Friction Splines)...............................................................................................................................1.......................
42574LA..........Clutch Hub, A4AF3 Forward (38 Teeth)(4 Clutch)(1.190” Overall Height)(.775” Thick At
........................Friction Splines)...............................................................................................................................1.......................
42574M...........Clutch Hub, F4A33/W4A33 Forward (42 Teeth) 5 Clutch (27 Splines) 1.580” Tall 1990-Up............1.......................
42583B............Planet Kit, KM171 1983-88..............................................................................................................1.......................
42583C............Planet Kit, KM175 (26 Teeth Forward Sun Gear) 1985-89..............................................................1.......................
42583CA..........Planet Kit, KM175 (29 Teeth Forward Sun Gear) 1985-89..............................................................1.......................
42583D............Planet Kit, KM172 (15/16” Thick Low/Reverse Clutch Hub) 1983-88..............................................1.......................
42583DA..........Planet Kit, KM172 (13/16” Thick Low/Reverse Clutch Hub) 1983-88..............................................1.......................
42583E............Planet Kit, KM175-5 / A4AF-2 (No Groove) Lug Height Is .950” (Can Use 42583EA) 1988-Up......1.......................
42583EA..........Planet Kit, KM175-5 / A4BF-2 (1 Groove) Lug Height Is .950” (Can Use 42583E) 1988-Up...........1.......................
42583G............Planet Kit, KM177-8 (No Groove) 1989-Up (Planet With Sun Gears & Bearings Less
........................Ring Gear) Retro Fits With The 42583GA (Forward Sungear 29 Teeth / Reverse
........................Sun Gear 34 Teeth)..........................................................................................................................1.......................
42583GA.........Planet Kit, KM177-8/W4A32 (1 Groove) Can Use 42583G 1989-Up (Contains: Planet
........................W/Sprag, Forward & Reverse Sun Gears, Bearings, Races)..........................................................1.......................
42583H............Planet Kit, KM171-5 (No Groove) 1989-Up......................................................................................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3k
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
42583J.............Planet Kit, KM176-5/A4AF1/A4AF2 (Lug Height Is .844”) (Bearing #247 Has 1 Race
........................On The Bottom) 1989-Up.................................................................................................................1.......................
42583LB..........Planet Kit, A4AF3 (Lug Height Is .844”)(Bearing #247 Has 2 Races) 2002-Up...............................1.......................
42583LC..........Planet Kit, A4BF1/A4BF2 (Lug Height Is .950”) (Bearing #247 Has 2 Races) 2002-Up..................1.......................
42583M...........Planet Kit, F4A33/W4A33 1990-Up..................................................................................................1.......................
42583Y............Planet Kit, KM172-5 1989-Up..........................................................................................................1.......................
42584BK..........Planet W/Sprag, KM171 1983-88....................................................................................................1.......................
42584CK.........Planet W/Sprag, KM175 (Has A 26 Tooth Forward Sun Gear) 1985-89..........................................1.......................
42584CA..........Planet W/Sprag, KM175 (Has A 29 Tooth Forward Sun Gear) 1985-89..........................................1.......................
42584DK.........Planet W/Sprag, KM172 (15/16” Thick Low/Reverse Clutch Hub) 1983-88....................................1.......................
42584DAK.......Planet W/Sprag, KM172 (13/16” Thick Low/Reverse Clutch Hub) 1983-88....................................1.......................
42584EK..........Planet W/Sprag, KM175-5 (22 Teeth On Short Gears With No Groove) 1988-Up...........................1.......................
42584EAK.......Planet W/Sprag, KM175-5 (22 Teeth On Short Gears With 1 Groove) 1988-Up.............................1.......................
42584EBK.......Planet W/Sprag, KM175-5 (19 Teeth On Short Gears With 1 Groove) 1988-Up.............................1.......................
42584GK.........Planet W/Sprag, KM177-8 (No Groove On Short Gears) 1989-Up..................................................1.......................
MITSUBISHI
7.3l JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42614EA..........Sun Gear, KM175-5/A4BF1/A4BF2 Reverse (34 Teeth) 2.265” Long (1 Groove In Middle)
........................Takes 1 Snap Ring And 1 Sealing Ring 1988-Up.............................................................................1.......................
42614GA.........Sun Gear, KM177-8 Reverse (34 Teeth) 2.265” Long (1 Groove At Edge) Takes 1 Snap Ring
........................And 1 Sealing Ring 1989-Up............................................................................................................1....................... MD-722185
42614GB.........Sun Gear, KM177-8 Reverse (34 Teeth) 2.265” Long (No Groove) Takes 1 Snap Ring And
........................1 Sealing Ring 1989-Up...................................................................................................................1.......................
42614H............Sun Gear, KM171-5/KM176-5/A4AF1/A4AF3 Reverse (34 Teeth) 2.080” Long (Takes 1 Snap
........................Ring And 1 Sealing Ring 1989-Up...................................................................................................1....................... MD-758040
42614M...........Sun Gear, F4A33/W4A33 Reverse (34 Teeth) 2.305” Long (Takes 1 Sealing Ring) 1990-Up.........1....................... MD-735060
42614Y............Sun Gear, KM172-5 Reverse (34 Teeth) 2.265” Long (Takes 1 Snap Ring & 1 Sealing Ring)
........................1989-Up...........................................................................................................................................1.......................
42622B............Shell, KM171 (Kickdown Drum) 1983-88.........................................................................................1.......................
42622C............Shell, KM172/KM175/KM177 (Kickdown Drum) 1983-89................................................................1.......................
42622E............Shell, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/F4A32/W4A32 1989-Up (3 7/8” Overall
........................Height)..............................................................................................................................................1.......................
42622H............Shell, KM171-5/KM176-5/A4AF1/A4AF3 (3 1/2” Overall Height) 1989-Up......................................1.......................
42622M...........Shell, F4A33/W4A33 (4 1/8” Overall Height) 1990-Up.....................................................................1.......................
MITSUBISHI
42630B............Center Support, KM171/KM172 Some (Aluminum) 2.080” Wide (24 Teeth Steels)
........................1 Bushing 1983-88...........................................................................................................................1.......................
42630C............Center Support, KM175/KM172 Some (Aluminum) 2.275” Wide (24 Teeth Steels)
........................2 Bushings 1983-89.........................................................................................................................1.......................
42630E............Center Support, KM172-5/KM175-5/KM177-8/A4BF1/A4BF2/W4A32 (Steel)(1.585” Overall
........................Thickness) 1988-Up (With The Support Laying On A Flat Surface (Front Side Down) Measure
........................Thru Center To Flat Surface)............................................................................................................1.......................
42630H............Center Support, KM171-5/KM176-5/A4AF1/A4AF3 (Steel)(1.460” Overall Thickness) 1989-Up
........................(With The Support Laying On A Flat Surface (Front Side Down) Measure Thru Center To Flat
........................Surface)............................................................................................................................................1.......................
42630M...........Center Support, F4A33/W4A33 (Steel 1.535” Overall Thickness) 1990-Up (With The Support
........................Laying On A Flat Surface (Front Side Down) Measure Thru Center To A Flat Surface)...................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3m
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
7.3n JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42714Y............Idler Gear, KM172-5 (32 Teeth) 1 Groove (.935” Thick) 3.630”OD 1989-Up...................................1.......................
42715B............Differential, KM171 (57 Teeth Ring Gear) 19 Teeth Speed-O Gear.................................................1.......................
42715BA..........Differential, KM171 (57 Teeth Ring Gear) 36 Teeth Speed-O Gear (.925” Thick Ring Gear)..........1.......................
42715C............Differential, KM172/KM175 (51 Teeth Ring Gear) 19 Teeth Speed-O Gear.....................................1.......................
42715CA..........Differential, KM172/KM175 (51 Teeth Ring Gear) 36 Teeth Speed-O Gear.....................................1.......................
42715CC.........Differential, KM172/KM175 (52 Teeth Ring Gear) 1.125” Thick Gear (1 Groove)
........................36 Teeth Speed-O Gear...................................................................................................................1.......................
42715E............Differential, KM175-5 (57 Teeth) 1.355” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715EA..........Differential, KM175-5 (57 Teeth) 1.355” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715EB..........Differential, KM175-5 (57 Teeth) 1.125” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715EC.........Differential, KM175-5 (57 Teeth) 1.100” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715EG.........Differential, KM175-5 (58 Teeth) 1.352” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715G............Differential, KM177-8 (56 Teeth) 1.365” Thick Gear (1 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715GA.........Differential, KM177-8 (52 Teeth) 1.352” Thick Gear (2 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715GB.........Differential, KM177-8 (58 Teeth) 1.486” Thick Gear (3 Groove Gear) 36 Teeth Speed-O Gear......1.......................
42715H............Differential, KM171-5/KM176-5 (64 Teeth) .925” Thick Gear (No Groove Gear).............................1.......................
42715J.............Differential, KM176-5 (66 Teeth) .925” Thick Gear (1 Groove Gear)...............................................1.......................
MITSUBISHI
42715JC..........Differential, KM176-5 (65 Teeth) .925” Thick Gear (1 Groove Gear)...............................................1.......................
42715L.............Differential, A4AF3 (74 Teeth Ring Gear)(1.127” Thick)(No Groove)(36 Teeth Speed-O Gear)......1.......................
42715LA..........Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(2 Groove)(36 Teeth Speed-O Gear)
........................(Housing Is 5 1/8” Overall Height From Front To Rear)...................................................................1.......................
42715LAA........Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(2 Groove)(36 Teeth Speed-O Gear)
........................(Housing Is 5 5/8” Overall Height From Front To Rear)...................................................................1.......................
42715LAB........Differential, A4AF1 (74 Teeth Ring Gear)(1.127” Thick)(1 Groove)(36 Teeth Speed-O Gear).........1.......................
42715LB..........Differential, A4AF2 (67 Teeth Ring Gear)(1.205” Thick)(No Groove)(36 Teeth Speed-O Gear)......1.......................
42715LC..........Differential, A4AF2 (67 Teeth Ring Gear)(1.205” Thick)(2 Groove)(36 Teeth Speed-O Gear).........1.......................
42715LD..........Differential, A4BF1 (69 Teeth Ring Gear)(1.205” Thick)(1 Groove)(36 Teeth Speed-O Gear).........1.......................
42715M...........Differential, F4A33 (58 Teeth) 3 Groove (1.110”ID Axle Housing) Cone Bearings...........................1.......................
42715MA.........Differential, F4A33 (57 Teeth) No Groove........................................................................................1.......................
42715MAA.......Differential, F4A33 (57 Teeth) 2 Groove (1.110”ID Axle Housing) Cone Bearings...........................1.......................
42715MAB.......Differential, F4A33 (58 Teeth) 3 Groove (1.041”ID Axle Housing) Cone Bearings..........................1.......................
42715MAC......Differential, F4A33 (58 Teeth) 2 Groove (1.041”ID Axle Housing)...................................................1.......................
42715MB.........Differential, W4A32/W4A33 (72 Teeth Ring Gear) 1 Groove...........................................................1.......................
42715MC.........Differential, W4A32/W4A33 (72 Teeth) 2 Groove (1.040”ID Axle Housing) Ball Bearings...............1.......................
42715Y............Differential, KM172-5 (56 Teeth) 1.125” Thick (No Groove Gear) 36 Teeth Speed-O Gear.............1.......................
42718M...........Center Differential Assembly, W4A32/W4A33 (8 Bolt) 1990-Up......................................................1.......................
42719M...........Viscous Coupling Unit, W4A32/W4A33 (4 1/4”OD) With 2 Splines.................................................1.......................
42725L.............Retainer, A4AF1 Differential (5 Bolt) Aluminum (3.850”OD Where The O-Ring Sets).....................1.......................
42725LA..........Retainer, A4AF3/A4BF1/A4BF2 Differential (5 Bolt) Aluminum (4.090”OD Where The O-Ring
........................Sets).................................................................................................................................................1.......................
42725M...........Retainer, F4A33/W4A32/W4A33 Differential (4 Bolt) Cast Iron.......................................................1.......................
42726LB..........Retainer, A4AF3/A4BF1/A4BF2 Differential Cup (2 Bolt)(Aluminum)..............................................1.......................
42726M...........Retainer, F4A33/W4A32/W4A33 Differential Cup (2 Bolt)(Aluminum).............................................1.......................
42728M...........Retainer, W4A32/W4A33 Center Differential (Aluminum) 1990-Up.................................................1.......................
42730B............Pinion, KM171 (18 Teeth) Governor Type With Bearing On End Of Shaft 1983-88.........................1.......................
42730C............Pinion, KM175 (16 Teeth) With Bearing On End Of Shaft 1985-89.................................................1.......................
42730D............Pinion, KM172 (16 Teeth) Governor Type With Bearing On End Of Shaft 1983-88.........................1.......................
42730E............Pinion, KM175-5 (16 Teeth) 1 Groove Next To Pilot (1.170” Thick Gear) Bearing On
........................Middle Of Shaft 1988-Up..................................................................................................................1.......................
42730EA..........Pinion, KM175-5 (16 Teeth) 1 Groove Next To Pilot (1.400” Thick Gear) Bearing On
........................Middle Of Shaft 1988-Up..................................................................................................................1.......................
42730EB..........Pinion, KM175-5 (16 Teeth) 1 Groove Next To Bearing (1.170” Thick Gear) Bearing
........................On Middle Of Shaft 1988-Up............................................................................................................1.......................
42730EC.........Pinion, KM175-5 (15 Teeth) No Groove (1.500” Thick Gear) ..........................................................1.......................
42730ED.........Pinion, KM175-5 (15 Teeth) No Groove (1.432” Thick Gear) 10 1/2” Long (3 Grooves
........................On Shaft Next To Bearing)...............................................................................................................1.......................
42730EDA.......Pinion, KM175-5 (15 Teeth) No Groove (1.432” Thick Gear) 10 1/2” Long (3 Grooves
........................On Shaft, 2 Next To The Bearing.....................................................................................................1.......................
42730EE..........Pinion, KM175-5 (16 Teeth) 1 Groove (1 3/8” Thick Gear) 10 1/2” Long (3 Grooves On Shaft)......1.......................
42730EF..........Pinion, KM175-5 (16 Teeth) 1 Groove (1 3/8” Thick Gear) 10 1/2” Long (2 Grooves On Shaft)......1.......................
42730EG.........Pinion, KM175-5 (15 Teeth) 1 Groove (10 1/2” Long) 3 Grooves On Shaft.....................................1.......................
42730EH.........Pinion, KM175-5 (15 Teeth) No Grooves (1.580” Thick Gear) 10 1/2” Long (3 Grooves
........................On Shaft)..........................................................................................................................................1.......................
42730G............Pinion, KM177-8 (17 Teeth) 2.370”OD Of Gear 1989-Up (Bearing On Middle Of Shaft).................1.......................
42730H............Pinion, KM171-5 (20 Teeth) No Groove (Bearing On End Of Shaft) 1989-Up.................................1.......................
42730HA..........Pinion, KM171-5 (20 Teeth) 2 Grooves (Bearing On End Of Shaft) 1989-Up..................................1.......................
42730J.............Pinion, KM176-5 (18 Teeth) 1 Groove (2.180”OD Of Gear) 1989-Up (Bearing On Middle
........................Of Shaft)...........................................................................................................................................1.......................
42730JA..........Pinion, KM176-5 (17 Teeth) No Groove (2.075”OD Of Gear) 1989-Up (Bearing On Middle
........................Of Shaft)...........................................................................................................................................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3o
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
42730JB..........Pinion, KM176-5 (17 Teeth) 1 Groove (2.075”OD Of Gear) 1989-Up (Bearing On Middle
........................Of Shaft)...........................................................................................................................................1.......................
42730JC..........Pinion, KM176-5 (16 Teeth) 1 Groove (2.235”OD Of Gear) 1989-Up (Bearing On Middle
........................Of Shaft)...........................................................................................................................................1.......................
42730JD..........Pinion, KM176-5 (18 Teeth) 2 Groove (2.180”OD Of Gear) 1989-Up (Bearing On Middle
........................Of Shaft)...........................................................................................................................................1.......................
42730JE..........Pinion, KM176-5 (18 Teeth) No Groove (2.250”OD Of Gear) 1989-Up ..........................................1.......................
42730LA..........Pinion, A4AF1 (21 Teeth Gear)(2.430”OD)(No Groove) Bearing On Middle Of
........................Shaft (9 1/2” Long)...........................................................................................................................1.......................
42730LB..........Pinion, A4AF3 (19 Teeth Gear)(No Groove)(1 ID Groove On Shaft)(9 3/4” Long)...........................1.......................
42730LC..........Pinion, A4AF2 (19 Teeth Gear)(2.475”OD)(No Groove) Bearing On Middle Of
........................Shaft (10 “ Long)..............................................................................................................................1.......................
42730LD..........Pinion, A4BF1 (18 Teeth)(No Groove)(1 ID Groove In Middle Of Shaft)(10” Long).........................1.......................
42730LE..........Pinion, A4BF2 (16 Teeth)(No Groove)(10 1/4” Long).......................................................................1.......................
MITSUBISHI
42750B............Bell Housing, KM171 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88......................1.......................
42750BA..........Bell Housing, KM171 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) 1983-88....................1.......................
42750C............Bell Housing, KM175/KM172-5/KM175-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole)
........................Cast # KM175-5 1985-Up (Uses Aluminum Spacer)........................................................................1.......................
42750D............Bell Housing, KM172 (13 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88......................1.......................
42750DA..........Bell Housing, KM172 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) 1983-88......................1.......................
42750DB.........Bell Housing, KM172 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) 1983-88....................1.......................
42750E............Bell Housing, KM175-5 (14 Bolt) 4 Dowels To Case (.870”ID Speed-O Hole) Cast # F4A22
........................(Double Starter Location) 1989-Up..................................................................................................1.......................
7.3p JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42750EA..........Bell Housing, KM175-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # F4A22
........................(Double Starter Location) 1989-Up..................................................................................................1.......................
42750G............Bell Housing, KM177-8 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # 177
........................(Uses An Aluminum Spacer Under Pump).......................................................................................1.......................
42750H............Bell Housing, KM171-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole)
........................Cast # KM170-1 1989-Up................................................................................................................1.......................
42750HA..........Bell Housing, KM171-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast #F4A21
........................(Double Starter Location) 1989-Up..................................................................................................1.......................
42750J.............Bell Housing, KM176-5 (14 Bolt) 4 Dowels To Case (1.100”ID Speed-O Hole) Cast # KM171
........................1989-Up...........................................................................................................................................1.......................
42757M...........Idler Cover, F4A33/W4A33 (6 Bolt) Tin 1990-Up.............................................................................1.......................
42758L.............Differential Cover, F4A33 (A4AF-1) 13 Bolt (Tin) 1991-Up..............................................................1.......................
42758LB..........Differential Cover, A4AF3/A4BF1/A4BF2 (13 Bolt)(Aluminum)........................................................1.......................
42758M...........Differential Cover, F4A33/W4A33 (12 Bolt) Tin 1990-Up.................................................................1.......................
42758MA.........Differential Cover, F4A33 (12 Bolt) Aluminum 1990-Up...................................................................1.......................
42760B............Case, KM171 (14 Bolt) 4 Dowels To Bell (Cast # 171) Non Vented (12 Pan Bolts, But Case
MITSUBISHI
........................Has 13 Holes) 1983-88....................................................................................................................1.......................
42760BA..........Case, KM171 (14 Bolt) 4 Dowels To Bell (Cast # 171) Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1983-88....................................................................................................1.......................
42760C............Case, KM175 (14 Bolts) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts,
........................But The Case Has 13 Holes) 1985-89.............................................................................................1.......................
42760CA..........Case, KM175 (14 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1985-89....................................................................................................1.......................
42760D............Case, KM172 (13 Bolt) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1983-88....................................................................................................1.......................
42760DA..........Case, KM172 (13 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1983-88....................................................................................................1.......................
42760DB.........Case, KM172 (14 Bolt) 4 Dowels To Bell (Cast # 175) Non Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1983-88....................................................................................................1.......................
42760DC.........Case, KM172 (14 Bolt) 4 Dowels To Bell (Cast # 175) Vented Case (12 Pan Bolts, But
........................The Case Has 13 Holes) 1983-88....................................................................................................1.......................
42760E............Case, KM175-5 (14 Bolt) 4 Dowels To Bell (Cast # S-KM175) 12 Pan Bolts, But The
........................Case Has 13 Holes 1988-Up...........................................................................................................1.......................
42760EA..........Case, KM175-5 (14 Bolt) 4 Dowels To Case (Cast # F4A22) 12 Pan Bolts, But The
........................Case Has 13 Holes (Double Starter) 1988-Up.................................................................................1.......................
42760G............Case, KM177-8 (14 Bolt) 4 Dowels To Bell (Cast # 177) 13 Pan Bolts 1989-Up.............................1.......................
42760GA.........Case, KM177-8 (14 Bolt) 4 Dowels To Bell (Cast # F4A23) 13 Pan Bolts 1989-Up........................1.......................
42760H............Case, KM171-5 (14 Bolt) 4 Dowels To Bell (Cast # S-KM171) 12 Pan Bolts, But The Case
........................Has 13 Holes 1989-Up.....................................................................................................................1.......................
42760HA..........Case, KM171-5 (14 Bolt) 4 Dowels To Case (Cast # F3A21-S) 12 Pan Bolts, But The
........................Case Has 13 Holes 1989-Up...........................................................................................................1.......................
42760J.............Case, KM176-5 (14 Bolt) 4 Dowels To Bell (Cast # KM176) 12 Pan Bolts 1989-Up........................1.......................
42760L.............Case, A4AF1 (4 3/8” Top Bolts) 2WD (Cast # A4AF1) 1991-Up......................................................1.......................
42760LA..........Case, A4AF (5 1/8” Top Bolts) 2WD (Cast # A4AF2) 1991-Up........................................................1.......................
42760LB..........Case, A4AF3 (5 1/8” Top Bolts) 2WD (Cast # A4AF3) 2000-Up (Uses A 6 Solenoid Valve Body)
........................(13 3/4” Long Bell To Rear)..............................................................................................................1.......................
42760LC..........Case, A4BF1 (5 1/8” Top Bolts) 2WD (Cast # A4BF) 1991-Up (Uses A 4 Solenoid Valve Body)
........................(14 1/8” Long Bell To Rear)..............................................................................................................1.......................
42760LD..........Case, A4BF2 (5 1/8” Top Bolts) 2WD (Cast # A4BF) 2000-Up (Uses A 6 Solenoid Valve Body)
........................(14 1/8” Long Bell To Rear)..............................................................................................................1.......................
42760M...........Case, F4A33 (4 3/8” Top Bolts) 2WD (Cast # F4A33EN) 1990-Up..................................................1.......................
42760MA.........Case, F4A33 (3 9/16” Top Bolts) 2WD (Cast # F4A33EVS) 1990-Up (Detent For The Rooster
........................Comb Bolts Into The Case)..............................................................................................................1.......................
42760MAA.......Case, F4A33 (3 9/16” Top bolts) 2WD (Cast # F4A33EV) 1990-Up (Detent For The Rooster
........................Comb Is Made In The Case)............................................................................................................1.......................
42760MB.........Case, W4A33 (4 3/8” Top Bolts) AWD (Cast # F4A33) 1990-Up (Detent For Rooster Comb
........................Is Made In The Case).......................................................................................................................1.......................
42760MBA.......Case, W4A33 (4 3/8” Top Bolts) 2WD (Cast # F4A33ENS) 1990-Up (Detent For The Rooster
........................Comb Bolts Into The Case)..............................................................................................................1.......................
42760MC.........Case, W4A33 (4 1/8” Top Bolts) AWD (Cast # W4A33) 1990-Up....................................................1.......................
42760N............Case, W4A32 (4 3/8” Top Bolts) AWD (Cast # W4A32) 1991-Up (Double Starter Location)...........1.......................
42760NA..........Case, W4A32 (4 3/8” Top Bolts) AWD (Cast # W4A32) Single Starter Location..............................1.......................
42760Y............Case, KM172-5 (14 Bolt) 4 Dowels To Bell (Cast # F3A22) 12 Pan Bolts 1989-Up........................1.......................
42762C............Housing, KM175 Overdrive (Cover) 3 Bolt 1985-89.........................................................................1.......................
42762E............Housing, KM175-5 Overdrive (Cover) 4 Bolt (Cast # S-KM175) 1988-Up.......................................1.......................
42762EA..........Housing, KM175-5 Overdrive (Cover) 4 Bolt (Cast # F4A22) 1989-Up (With Speed Sensor).........1.......................
42762G............Housing, KM177-8 Overdrive (Cover) 4 Bolt (Cast # KM177) 1989-UP..........................................1.......................
42762GA.........Housing, KM177 Overdrive (Cover) 4 Bolt (Cast # F4A23) With Speed Sensor Hole.....................1.......................
42762L.............Housing, A4AF1/A4AF2 Overdrive (Cover) 4 Bolt (Round)(With Speed Sensor Hole) 1991-99.....1.......................
42762LC..........Housing, A4AF3 Overdrive (Cover)(12 Bolt)(With Speed Sensor Hole) 2000-Up...........................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3q
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
7.3r JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & 4 Speed KM170 thru W4A33
42879B............Snap Ring, KM171 Direct Drum Retainer........................................................................................1.......................
42879C............Snap Ring, KM172/KM175 Direct Drum Retainer............................................................................1.......................
42879E............Snap Ring, KM175-5/KM177-8/A4BF1/A4BF2/W4A32 Direct Drum Retainer
........................(.155”Thick, ID To OD).....................................................................................................................1.......................
42879H............Snap Ring, KM171-5/KM176-5/A4AF1 Direct Drum Retainer.........................................................1.......................
42879L.............Snap Ring, A4AF3 Direct Drum Retainer (.120” Thick, ID To OD)...................................................1.......................
42879M...........Snap Ring, F4A33/W4A33 Direct Drum Retainer............................................................................1.......................
42881B............Snap Ring, KM171 Holds Race To Input Shaft (7/16”ID) 1983-88...................................................1.......................
42881C............Snap Ring, KM172/KM175/KM171-5/KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4AF3/
........................A4BF1/A4BF2/F4A33/W4A32/W4A33 Holds Race To Input Shaft (3/4”ID) 1983-Up......................1.......................
42885B............Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.071”) 1983-89.....1....................... MD-707413
42885BA..........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.079”) 1983-89.....1....................... MD-707406
42885BB..........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.087”) 1983-89.....1....................... MD-707407
42885BC.........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.094”) 1983-89.....1....................... MD-707408
42885BD.........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.102”) 1983-89.....1....................... MD-707409
42885BE..........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.110”) 1983-89.....1....................... MD-707410
MITSUBISHI
42885BG.........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.118”) 1983-89.....1....................... MD-707411
42885BH.........Snap Ring, KM171/KM172/KM175 Holds Low/Reverse Top Pressure Plate In (.126”) 1983-89.....1....................... MD-707412
42885E............Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.071”) 1988-Up..1.......................
42885EA..........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.079”) 1988-Up..1.......................
42885EB..........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.087”) 1988-Up..1.......................
42885EC.........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.094”) 1988-Up..1.......................
42885ED.........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.102”) 1988-Up..1.......................
42885EE..........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.110”) 1988-Up..1.......................
42885EG.........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.118”) 1988-Up..1.......................
42885EH.........Snap Ring, All KM Except KM171/KM172/KM175 Low/Reverse Pressure Plate (.126”) 1988-Up..1.......................
42885M...........Snap Ring, F4A33/W4A33 Holds Low/Reverse Top Pressure Plate In (.115”) 1990-Up.................1.......................
42889B............Snap Ring, All KM With Ring Gear To Hub (.037”) 1983-Up............................................................1.......................
42889M...........Snap Ring, F4A33/W4A33 Holds Ring Gear To Hub (.060”) 1990-Up.............................................1.......................
42893B............Snap Ring, KM171/KM172/KM175 Holds Return Spring To Center Support...................................1.......................
42893E............Snap Ring, KM171-5/KM172-5/KM175-5/KM176-5/KM177-8 Holds Return Spring In
........................Center Support.................................................................................................................................1.......................
42894B............Snap Ring, KM171/KM171-5 Bearing To Case (2.710”ID) .060”.....................................................1.......................
42894C............Snap Ring, KM171/KM171-5 Bearing To Case (2.710”ID) .035”.....................................................1.......................
42894E............Snap Ring, KM172-5/KM175-5/KM176-5/KM177-8 Bearing To Case (3” ID)..................................1.......................
42894LC..........Snap Ring, A4AF1/A4AF2 Bearing To Case (.040” Thick)(3.884”OD).............................................1
42894M...........Snap Ring, F4A33/W4A32/W4A33 Bearing To Case (3.650”ID) 1990-Up.......................................1.......................
42895B............Snap Ring, KM171/KM171-5 Bearing To Shaft (1.090”ID)...............................................................1.......................
42895C............Snap Ring, KM172/KM175 Bearing To Shaft (1.300”ID)..................................................................1.......................
42895E............Snap Ring, KM172-5/KM175-5/KM176-5/KM177-8/A4AF1/A4BF1/A4BF2/W4A32/W4A33
........................Bearing To Shaft (1.500”ID) 1990-Up...............................................................................................1.......................
42896B............Snap Ring, KM171/KM172/KM175/KM172-5/KM176-5 Servo Cover (Top).....................................1.......................
42896E............Snap Ring, KM175-5/KM177-8 Servo Cover (Top)..........................................................................1.......................
42896M...........Snap Ring, F4A33/W4A33 Servo Cover (Top).................................................................................1.......................
42896N............Snap Ring, W4A32 Servo Cover (Top) Use 42869N.......................................................................1.......................
42897B............Snap Ring, KM171/KM172/KM171-5/KM172-5 Holds Governor To Transfer Shaft.........................1.......................
42898L.............Snap Ring, A4AF3/A4BF1/A4BF2 Pinion Bearing To Case (.099”Thick)(2 Eyelets)........................1
42899B............Snap Ring, KM171/KM172/KM175/KM171-5/KM172-5 Holds Gear To Shaft..................................1.......................
42905B............Servo Assembly, KM171 (2.075”OD & 3.056”OD) Aluminum Cover 1983-88..................................1.......................
42905C............Servo Assembly, KM175 (1.770”OD & 3.056”OD) Tin Cover 1985-89.............................................1.......................
42905D............Servo Assembly, KM172/KM172-5 (1.955”OD & 3.056”OD) Aluminum Cover 1983-Up.................1.......................
42905E............Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover
........................With 1 Wire Made To Cover) With Triangle Connection (With Adjustable Pin)................................1.......................
42905EA..........Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover
........................With 1 Wire Made To Cover) With Round Connector (With Adjustable Pin)....................................1.......................
42905EB..........Servo Assembly, KM175-5/KM177-8 (1.872”OD & 3.252”OD) 1988-Up (Plastic Cover With
........................Connector On Cover) No Wires (With Adjustable Pin).....................................................................1.......................
42905H............ServoAssembly, KM171-5 (1.955”OD & 3.056”OD) Aluminum Cover 1989-Up...............................1.......................
42905J.............Servo Assembly, KM176-5 (1.770”OD & 3.056”OD) 1989-Up (Plastic Cover
........................With 1 Prong Connector On Cover) No Wires (With Adjustable Pin)...............................................1.......................
42905JA..........Servo Assembly, KM176-5 (1.770”OD & 3.056”OD) 1989-Up (Plastic Cover With 1 Wire
........................Made To Cover) With Triangle Connector (With Adjustable Pin)......................................................1.......................
42905L.............Servo Assembly, A4AF1/A4AF3 (1.770”OD & 3.056”OD) Plastic Cover With 1 Wire
........................Made To Cover (With 1 Prong Connector) Non Adjustable Pin........................................................1.......................
42905LB..........Servo Assembly, A4BF1/A4BF2 (1.872”OD & 3.252”OD) Plastic Cover With 1 Wire
........................Made To Cover (With 1 Prong Connector) Non Adjustable Pin........................................................1.......................
42905M...........Servo Assembly, F4A33/W4A33 (2.225”OD & 3.925”OD) Plastic Cover 1990-Up..........................1.......................
42905N............Servo Assembly, W4A32 (2.041”OD & 3.575”OD) Plastic Cover 1991-Up......................................1.......................
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3s
KM170 thru W4A33 FWD 3 & 4 Speed
PART # HARD PARTS (Continued) QTY. REFERENCE #
7.3t JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk
FWD 3 & Shift
TD 04_06 4 Speed
Pointers_lay 8/29/06 10:25 AM Page 10 KM170 thru W4A33
Shift Pointers
Temp-eramental
Subject:
Flare on 2-3 shift
Unit:
Hyundai KM series
Hyundai
Essential Reading:
Rebuilder
Diagnostician
R & R (Installers)
MITSUBISHI
Shop Owner
Center Manager
Author:
I
Pete Luban, ATSG was handling a call on the ATSG Tech Line about a
Transmission Digest 2000 Hyundai Elantra that had a complaint of a flare
Contributing Editor
on the
2-3 shift.
Ordinarily, a KM unit with a 2-3 flare could have a
problem with servo-release pressure, usually caused by
the computer not shutting off the pressure-control sole-
noid quickly enough. There could be a problem with the
servo switch if it were stuck. In other words, these are the
usual components that could cause a 2-3 flare on a KM
unit.
In this situation it was none of the usual items. It was,
believe it or not, the transmission-fluid-temperature sen-
sor. As I looked further into this, sure enough, I found
factory bulletin 00-40-010 dated August 2000.
It seems that this vehicle had stored a P0712 for a
shorted ATF-temp sensor, which causes the TCM to cre-
ate a flared 2-3 shift in this vehicle model. Computer
strategy seems to be the culprit here.
As I read the bulletin, I found other unusual computer
strategies in play on various Hyundai model years, all re-
lated to the ATF-temp sensor and in what manner it
failed.
If the ATF-temp sensor fails open and stores code
P0713, the complaint would be a harsh garage shift from
park to either drive or reverse and no converter-clutch
application.
If the vehicle were a 1996-2000 Elantra or Tiburon, or a
1995-2001 Accent, the complaint would be no 4th gear.
If this were a 1999-2001 Sonata, the complaint would
be no upshift past 2nd gear.
Should the ATF-temp sensor become shorted and a
P0712 be stored, the 2-3 flared-shift complaint would af-
fect 1996-2000 Elantra and Tiburon as well as 1995-2001
Accent.
In the event this happens to you, the part number of
the ATF-temp sensor for the 1996-2000 Elantra and
Tiburon and for the 1995-2001 Accent is 46386-22600.
The part number for the 1999-2001 Sonata is 46386-
39050. TD
JP (Automatic Transmissions) Ltd Tel +44 (0) 1934 852772 info@jpat.co.uk www.jpat.co.uk 7.3u