Professional Documents
Culture Documents
Objectives
Element definition
Geometry Commands
Meshing Commands
3
Training Course
GTS NX
4
Training Course
GTS NX
5
Training Course
GTS NX
6
Training Course
GTS NX
7
Training Course
GTS NX
8
Training Course
GTS NX
9
Training Course
GTS NX
10
Training Course
GTS NX
11
Training Course
GTS NX
12
Training Course
Views
Selection
Filter
Work
Tree
Output Window
Properties Units
14
Training Course
GTS NX
selected
wait for
selection
value input
coordinate/value input
preview
15
Training Course
GTS NX
16
Training Course
GTS NX
select/unselect
selection method
selection filter
17
Training Course
GTS NX
18
Training Course
GTS NX
Dividing Tools
A Selected Surface divides the selected solids.
Selected Tool Surface
Select a Tool Surface (Datum Plane, Shell, Face), which will divide the solids. If the Tool
Surface consists of multiple Faces, user must combine them together and select here as
a single Shell.3-Pt Plane
3-Pt Plane defines an infinite plane, which will divide the selected solids. The
coordinates of the 3 points may be specified using Snap.
Divide Touching Faces of Neighbors
When a number of solids exist in a compound and only selective solids need to be
divided, the neighboring solids to the selected solids will be divided at the
corresponding face as well. This is intended to ensure the connectivity of mesh at
thecorresponding faces.
Delete Original Shape(s)
This option deletes Source Shape leaving the shapes subsequent to a division operation.
Delete Tool Shape(s)
This option deletes Tool Surface leaving the shapes subsequent to a division operation.
19
Training Course
GTS NX
20
Training Course
GTS NX
21
Training Course
GTS NX
22
Training Course
GTS NX
23
Meshing in midas GTS NX
4 Geometry > Divide > Solid 3. Delete the top half of the box by selecting
on the screen and pressing DELETE
Divide the solid
Y - Axis
13
Point 3
Point 2
Training Course
GTS NX
16
Y - Axis
Method: Copy
Distance: -10
Times: 5
Training Course
GTS NX
Material 1: Concrete
-Model Type : Elastic
Material 2: Ground
-Model Type : Mohr - Coulomb
GTS NX
Name: Concrete
-Material : Concrete
Name: Ground
-Material : Ground
Training Course
GTS NX
23
Mesh > Element > Parameters > 3D
Change the name of the mesh sets for the 2 exits and the ground.
Click on Linear Static After Excavation > Solid Strains > E – Max Shear
-This activates the maximum shear strains
Training Course
GTS NX
Thank you
58