Professional Documents
Culture Documents
Installation Instructions
I-ED00791
47DT Dummy-Pull When Dogged 47CE Cylinder Escutcheon - Key Locks & Unlocks Lever
47NL Night Latch - Key Retracts Latchbolt 47BE Blank Escutcheon - Always Operable
CYLINDER COLLAR
Cylinder collar CASHBOX47CE
NUT shown
CYLINDER LOCKING PLATE
Cylinder locking plate
CYLINDER CAM
Cylinder cam
TRIM ACTUATING SHAFT
Trim actuating shaft
MOUNTING POSTS
Mounting posts
HANDING PIN
Handing pin
LEVER HANDLE
Lever handle
Outside of Door
RHR LHR
1/2” 1/4” - 20
1-3/32”
1-1/4” Inside of Door
APPLICATIONS
Single Door with Rim Device CL
Double Door with Mullion
CL CL
2-1/4”
Double Door with CL
[57] Double Door with C
L C
L
1-7/16”
SVR Device [37] Rim Device and Double Door
Strike
SVR Device
Door Door Door Door
10/28/2011 1 of 3
4700 Series Trim
Installation Instructions
I-ED00791
INSTRUCTIONS
A. Rotate lever handle to the right or left direction to match desired door handing.
B. Insert square handing pin into hub as shown.
C. For Surface Vertical Rod devices only, be sure the handing matches what is indicated on the product box label.
Surface Vertical Rod handing cannot be changed in the field.
Note: See back of trim for a label that indicates which direction to position handle for RHR or LHR handing. The label
also indicates which direction the trim actuating shaft should rotate.
RHR
(Not applicable on
Rim devices)
LHR
(Not applicable on
Rim devices)
Right Hand Reverse Left Hand Reverse
(RHR) (LHR) Hub
CYLINDER
LOCKING
Cylinder
PLATE
Locking
Plate
Mortise
MORTISE Cylinder
CYLINDER
10/28/2011 2 of 3
4700 Series Trim
Installation Instructions
I-ED00791
INSTRUCTIONS (CONTINUED)
10/28/2011 3 of 3