Professional Documents
Culture Documents
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. 170
b. 100
c. 120
d. 110
e. 130
f. 90
Clear my choice
Question 2
Answer saved
Marked out of 1.00
Flag question
Question text
Which parameter can be tuned to affect the selection of a static route as a backup when
a dynamic protocol is also being used?
Select one:
a. administrative distance
b. link bandwidth
c. hop count
d. link cost
e. link delay
Clear my choice
Question 3
Answer saved
Marked out of 1.00
Flag question
Question text
Refer to the exhibit below. The network engineer for the company that is shown wants to
use the primary ISP connection for all external connectivity. The backup ISP connection
is used only if the primary ISP connection fails. Which set of commands would
accomplish this goal?
Select one:
a. ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252
b. ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0 10
c. ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0
d. ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252 10
Clear my choice
Question 4
Answer saved
Marked out of 1.00
Flag question
Question text
The network administrator of ABC Supermarket configures the router with the "ip route
172.16.1.0 255.255.255.0 172.16.2.2" command. How will this route appear in the
routing table?
Select one:
a. C 172.16.1.0 is directly connected, Serial0/0
b. C 172.16.1.0 [1/0] via 172.16.2.2
c. S 172.16.1.0 [1/0] via 172.16.2.2
d. S 172.16.1.0 is directly connected, Serial0/0
Clear my choice
Question 5
Answer saved
Marked out of 1.00
Flag question
Question text
What type of route allows a router to forward packets even though its routing table
contains no specific route to the destination network?
Select one:
a. Generic route
b. Destination route
c. Default route
d. Dynamic route
Clear my choice
Question 6
Answer saved
Marked out of 1.00
Remove flag
Question text
Refer to the exhibit. The network engineer in RMSIndustries that is shown wants to use
the primary ISP connection for all external connectivity. The backup ISP connection is
used only if the primary ISP connection fails. Which set of commands would accomplish
this goal.
Select one:
a. ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0 10
b. ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252
c. ip route 0.0.0.0 0.0.0.0 s0/0/0
ip route 0.0.0.0 0.0.0.0 s0/1/0
d. ip route 198.133.219.24 255.255.255.252
ip route 64.100.210.80 255.255.255.252 10
Clear my choice
Question 7
Answer saved
Marked out of 1.00
Flag question
Question text
Which command can you use to manually assign a static IPV6 address to a router
interface?
Select one:
a. ipv6 address 2001:db8:2222:7272::72/64
b. ipv6 autoconfig 2001:db8:2222:7272::72/64
c. ipv6 autoconfig
d. ipv6 address PREFIX_1::1/64
Clear my choice
Question 8
Answer saved
Marked out of 1.00
Flag question
Question text
What happens to a static route entry in a routing table when the outgoing interface
associated with that route goes into a down state?
Select one:
a. The static route remains in the table because it was defined as static.
b. The router polls neighbors for a replacement route.
c. The Static route is removed from the routing table.
d. The router automatically redirects the static route to use another interface.
Clear my choice
Question 9
Answer saved
Marked out of 1.00
Flag question
Question text
Which parameter would you tune to affect the selection of a static route as a backup,
when a dynamic protocol is also being used?
Select one:
a. Administrative distance
b. Link bandwidth
c. Hop count
d. Link delay
e. Link cost
Clear my choice
Question 10
Answer saved
Marked out of 1.00
Flag question
Question text
Select one:
a. ip route 172.16.0.0 255.248.0.0 10.0.0.1
b. ip route 0.0.0.0 0.0.0.0 serial 0/0/0
c. ip route 209.165.200.228 255.255.255.248 10.0.0.1 120
d. ip route 209.165.200.228 255.255.255.248 serial 0/0/0
Clear my choice