Professional Documents
Culture Documents
tech
T O O L I N G S
BORING SYSTEM
2
MICRO BORING KIT
The MICRO BORING KIT was developed to accommodate & manufacture a wide range of bores from Dia 6 mm to
135 mm using a single MICRO BORING HEAD. The parts are made of high quality tool steel & heat treated to a good
hardness, for a longer durability and maintain its accuracy for many years. Also care has been taken to design and
manufacture every part with stringent quality checks to produce products of very high quality. The MICRO BORING
KIT is available in different range of KITS and contains all the required accessories to conveniently FINISH bores. The
boring bars have been manufactured to bore length up to 3 times its diameter. Also the design is such that the boring
bar does not move too much from its center to maintain a balance and facilitate a good boring accuracy. Through
coolant facility can be provided for easy chip removal and better cutting of material.
Carbide boring bars are available for deeper machining up to 6 times L/D
PART LIST
7 6 5 4 2 1 13 14 9 1. FB 6.21
11 2. FB 8.28
10 3. FBH 0680
8 4. FB 10.35
12
5. FB 12.42
6. FB 16.55
7. FB 22.66
8. EB 25.53 + M5 Screw
9. FC 2836
16 15
10. FC 3654
11. CN 10
2
12. FC 5484
4
0
NOTE:
Adaptor is not included in the Kit
Through coolant is optional
0
8
6 4
FBH 0680
EB25.53
L
FC5484
FB6.21
FB8.28
Ø6-8
FC5484
Ø8-10
FB10.35
FB12.42 Ø54-84
Ø10-14
Ø12-16 FB16.55 FC2836 FC3654
Ø16-22 FB22.66
FC2836 FC84105
FC3654
Ø22-28
Ø28-36 Ø36-54
FC84105
Ø84-105
FC105135
FC105135
Ø105-135
4
1) FB 6.21
2) FB 8.28
3) FB10.35
4) FB 12.42
5) FB 16.55
6) FB 22.66
1) FC 2836
one division = 2 micron on dia
By using
1) FC 5484
2) FC 84105
3) FC 105135
O16.00
D
FINISH L INSERT
RANGE ‘D’ SCREW ORDER CODE
BORING BAR
EXTENSION BARS L
O16.00 D
FINISH
RANGE ‘D’ L CARTRIDGE INSERT SCREW ORDER CODE
BORING BAR
FINISH
RANGE ‘D’ L INSERT SCREW ORDER CODE
BORING BAR
O16.00
FINISH
CARTRIDGE RANGE ‘D’ L INSERT SCREW ORDER CODE
BORING BAR
CBS16.100 CBS016100
100.0
CFC1622 Ø16 - Ø22 CFC016022
TP - 09 CS250T
CFC2228 Ø22 - Ø28 CFC022028
7
MICRO BORING HEADS
“FBH” SERIES (Dia 22 -54)
The MICRO BORING HEAD, FBH series are available from dia
22 mm in different sizes up to dia135mm. The head has a fine
adjustment of 2 microns on dia. The system is built on a
modular concept with MC-32 connection on one side.
L L2
MICRO
BORING HEAD
RANGE ‘D’ L L2 CARTRIDGE INSERT SCREW ORDER CODE
La L
MICRO
BORING HEAD
RANGE ‘D’ L CARTRIDGE INSERT SCREW ORDER CODE
50
50
75
L1 L2
the bridge.
BRIDGE
“CBH” HEAD
L
CARTRIDGE
DIA 18 - 135 mm L2 d2
L
d1 D
RT-105-A RBT105125
RBT 70105 Ø70 - Ø105 Ø50.0 125 - 2.08
RC-105-A RBC105125
RT-105-A RBT105150
RBT 105135 Ø105 - Ø135 Ø60.0 150 - 3.65
RC-105-A RBC105150
D
L
ADAPTOR
BMC-25
BRIDGE
L
HEAD
CARTRIDGE
Twin Rough Boring tool has 2 Cartridges marked I & O for differential cutting,
There is a 0.3mm difference in height in manufacturing.
o I
14
SPECIAL TOOLS
OD TURNING TOOL
2
6 4
6 4
to specific applications.
La LOCKING EFFECT
ADAPTOR GPL La
MC32/BMC25
BT 40 60 30
BT 50 100 60
0
8 2
HSK A50 80 54
4
6
HSK A63 80 54
The complete design of boring tools is built on a MODULAR concept. This helps in easy interchanging of
tools. The parts to be coupled are inserted and fastened with the help of tapered bolt and nut. On tightening
the tapered bolt, it creates a axial thrust to clamp the face rigidly. The diameter and face are accurately
ground to give perfect seating, a better concentricity and rigidity.
The modular adaptor are available in different machine tapers (BT-40, BT-50, SK-40, HSK-63, HSK-100
etc.,) with MC-32 connector, to suit the BORING HEADS of FB series and Rough boring tools
La
ADAPTOR GPL La
MC32/BMC25
BT 40 60 30
BT 50 100 60
HSK A50 80 54
HSK A63 80 54
+
0 BRF135 (Ø135-225)
8
6
4 0.002mm
0
2
6 4
CW/CBH-B01
CBH-B01
0
2 FC5484
0
6
2
Ø 0.002mm 8
6
4
0
Ø 0.002mm
4
2
Ø 0.002mm
FC84105
FC105135
FOR MICRO BORING TOOLS - DIA 6mm to 315mm
BRF225 (Ø225-315)
FC5484 0
2
6 4
CW/CBH-B01
FC5480
Ø54-84
CBH-B01
FB6.21
EB25.53
FB8.28 FC84105 FC5484
Ø6-8
Ø8-10 FB10.35
FB12.42
Ø10-14
FC84105
Ø12-16 FB16.55
FC2836 Ø84-105
Ø16-22 FB22.66 FC84105
FC2836
Ø22-28
FC105135
Ø28-36
FC3654
18
FC105135
FC105135
FC3654 Ø105-135
Ø36-54
19
USER SELECTION GUIDE
FOR TWIN ROUGH BORING TOOLS
DIA 18 TO 315 mm
Introduces ‘BORING SYSTEM’ that makes hole making
convenient and cost effective. Having been in the
machining field for more than two decade and with a lot
of experience in fine boring and rough boring, we have
tried to offer a range that will be useful and convenient
to all user (both for production and one off application).
Cat.Rev.2019-1