Professional Documents
Culture Documents
030012a PDF
030012a PDF
Electric wiring diagram: LO 914 (C 688.276), Electric wiring diagram reading Modulus:
LO 915 (C 688.276) This electric wiring diagram is divided in several modulus dis-
A - Engine start and shutdown system, Charging system,
Validity: As of production start placed in alphabetical order. The electric circuits continuity is
Headlights
indicated by an arrow directed to a box which indicates the
B - Turn signal lights, Reverse gear light, Horn, Windshield
Nominal voltage: 24 Volts part wherein the electric cable is connected, and the modulus
wiper
where the part is displaced.
C - Tachograph/Speedometer, Gauges, Warning lights
Electric cables color codes:
D - Brake light, Coolant level sending unit, Exhaust brake,
bl = blue Example 1:
Flammstart (Engine cold starting)
br = brown
E - Position light, Forced ventilation
ge = yellow
F - 24/12 Volts converter, 12 Volts electric plug, Plug for di-
gn = green
agnose of engine management system
gr = gris
G - Engine electronic management system
li = lilac
H - Brake pads wear indicator
or = orange
I - Fuses and relay identification label
rt = red
sw =black This example shows that the cable 1 gr/ge is connected to the
ws = white following parts:
— Electronic tachograph P5, connector A, terminal 8/2, dis-
Electric cables identification placed on modulus C
2,5 rt/bl — Dashboard P18, connector J1, terminal 14/1, displaced on
secondary color modulus C
main color
cable section(2,5 mm2) Example 2:
Ground connection
The ground connection of vehicle electric parts are identified
with numbered lozenge and are connected to the battery neg-
ative terminal on the plug connection XPM1 at the vehicle
frame.
The numbered lozenges refer to the ground connections, as
follows:
This example shows that the cable 1,5 gr/bl is connected to
à1 − Main harness the following part:
à2 − Left harness — resistance R4, terminal 58b, displaced on modulus A
à3 − Right harness
à4 − Roof harness
EE.03-0012-A Edition: 09/99 Modulus A
D - Brake light, Coolant level sending unit, Exhaust brake, Flammstart (engine cold starting)
B14 Brake light switch
B36 Flammstart temperature switch
B49 Coolant level sending unit
E9 Left brake light
E10 Right brake light
FC Fuses bridge for terminal 15
K33(2) Electronic unit for coolant level sending unit
R8 Glow plug for Flammstart
S7 Exhaust brake switch - direct/disconnect
U2 Flammstart electronic unit
V21 Flammstart electromagnetic valve
EE.03-0012-A Edition: 09/99 Modulus E
Voltage converter
F12- 5A Reverse gear light F27- 7,5A
24/12 V