SIEMENS
‘System configurator with network view
‘The system configurator is started by double-clicking on the
station symbol
i
‘The Network area shows the currant network
‘structure, Subnete . users. IP addrosees- all |
| basic information ata glance!
Ifyou are interested in details, the properties PSEA
‘window help.
Fine 38
12.2 PAS Configuration Update
Update PAS configuration with the SCD file (which includes the additional bay IEDs from other
manufacturers also). Refer to figure 39.
2, Select only the additional IEDs that are to be incorporated in the configuration and press OK.
Refer to Figure 40.
3. Goto Mapping and make sure that the signals required for SCADA are selected in the
corresponding IED signal list. Refer to Figure 45
4. After the update process is over, goto Topology and creates the additional structure as shown in
Figures 41, 42 and 43.
5. Drag and Drop the additional signals (of the new bay IEDs) to the corresponding IED name.
Refer to Figure 44.
Unrestricted SAS EDS Page 90 of 104 _ Document No. (4)-GT19EA-JG9016-00-H500 Rev-0
yee See Ate nearest
“Tumkur Pooling and must no be specifically used fr oer projet or product as a erence. Contents ofthis document ar subject
to-charge without prior tice witha revision