=W-I=T-I
‘WWW.WELDERINSTITUTE.COM
Company Name: Sample
Revision No.: 0
WPS No. (9): RTP-6
Revision Date:
WELDER TRAINING AND TESTING INSTITUTE
‘1144 N.GRAHAM ST, - ALLENTOWN, PA 18109 » TEL 610-820-9551 « FAX 610-820.0271
Welding Procedure Specification (WPS)
AWS D1.6
Dat
18/2007 POR No. (s): Pre-Qualife,
Authorized B)
Type: Manual
By
Welding Process (es): GTAW
Joint Detail
Type of Joint: V-Groove Weld
Backing: Prequalified Stainless
Single or Double Welded:
\
Groove Angle: 20-30"
Root Opening: V8
Back Gouging: None
Root Face Dimension: None
Radius (-U): 0
ingle Welded
Base Metals
Material Group (3)
Type oF Grade
Thickness-Grooves:|,00" Max
Diameter of (Pipe): 278" OD & Over
Postweld Heat Treatment
AB Ww: AB Temperature: None
All (@ AM Time: nla
Fillet: Al
Position
Position: All Positions
Filler Metals 1
2 3 Weld Progression: pill Only
SPA Spee. Aso nia nla
AWS Class ER 308, na wa Electrical Characteristics
F Number: 6 ia na Current: DCEN
A Number: s ia nla Transfer Mode: ois
wee ee een Tungsten Electrode Size: 32" da. Type: 2% Thoriated
Other: (GTAW) Solid or Metal Cored Only Technique
Stringer or Weave: Both
aa or mera Mutt Pass or Single Pass (per side): Multiple pass
[Shielding aye ogcomposion “CEH || number af Beers Single elev
Argon 100% 10-25 |) stecrrode Spacing - Longitudinal: w/a
Gas Cup Size: nla Lateral: nia
Angle: wa
Preheat
Preheat Temp. (Min):
50 °F (eutient preheat to move motte)
Contact Tube to Work Distance: ws
Peening: None
sneha ace i ieta iste Esk eoeeels ison Interpass Cleaning: Mechanical Cleaning
Passes Process Glass Diam. Type & Polarity Toles Travel Speed
Ar GTAW TST a DCEN Tz = Ts ipm
9-15 9-15 pm
ER 3081 Mie DEN 1-16 9-15 pm
Ios 175, 9 9215 pm
ER 3081 3/32 DCEN 130-250, 12-20 7-13 ipm
187-312 13.23 7213 ipmWTI
(WWW.WELDERINSTITUTE.COM
WELDER TRAINING AND TESTING INSTITUTE
‘144 N.GRAHAM ST. - ALLENTOWN, PA 18109 - TEL 610-620-9551 - FAX 610-820.0271
PREQUALIFIED WPS REQUIREMENTS
AWS D1.6
Welding Process: GTAW qvotes 3,7.8)
Variable Position Weld Type
Maximum Electrode Flat Fillet
Diameter Groove
Root Pass
Horizontal Fillet
Groove
Vertical all
Overhead All
Maximum Current- All Fillet See Note 7 wil
All Groove weld root pass
(with opening)
Groove weld root pass
(without opening)
Groove weld fill pass
Groove weld cap pass
Flat ~ AIL aeseaanes ry
Thickness- Horizontal aie
O00) Vertical aie"
Overhead a6"
Maximum Fill Pass Flat All 18
‘Thickness- Horizontal us"
Vertical vs”
Overhead vs"
‘Maximum Single Pass Flat “Ald
Fillet Weld Size- Horizontal
Vertical
Overhead
Maximum Single Pass ATL ‘Any individual layer 7
Layer Width- of width ‘w"
(Note)
ows:
#2800329
46, See Figure 3.29 for width o depth limitations
#7. GTAW and pulse GTAW is prequalified in all welding postions, DCEN only. Prequlifedshiclding gases
helium mines, Prequalifiedcurent range depends upon tungsten eleewode diameter 35 follows
um, and
restricted to welding grade (or
Electrode Diameter Curent Range, DC
peeessear ut 40-150,
3 “60-250
1s 100 400
33 130-500
‘For GTAW the elecrde per ANSVAWS AS 12, Sposficaion for tungsten and wagsten alloy elestvodes for are weling and Cag
18. Split ayers when the maximum single pas layer is exceeded