Professional Documents
Culture Documents
(/) HU (/hu/tudastar/hajlitasi-tablazatok)
EN (https://www.meliorlaser.hu/en/knowledge-
center/bending-tables)
DE (/de/)
Bending tables
Blog (/en/knowledge-
Super User
center/blog)
L-profile
Material guide
(/en/knowledge- The L-profile table shows the minimum height of the side to be bent (Xmin), with
the given material thickness, bending radius (R), and possible bending length (L).
center/material-guide)
This table can be a useful guide especially for parts with low-profile (e.g. edge
Dimension tables for protectors and thresholds, etc.).
bending Carbon steel and Stainless steel and Aluminium
(/en/knowledge- galvanized steel acid resistant steel (AlMg3)
Mateial
center/bending-tables) R-
thickness
theoretical Tool Xmin L Xmin L Xmin L
Laser cutting
radius
technology R 0,6 v4 3,8 1500 3,8 1500 3,8 1500
(/en/knowledge- 0,8 R 0,8 v5 4,3 1500 4,3 1500 4,3 1500
U-profile
The U-profile table shows the minimum height of the sides to be bent (Xmin,
Ymin), with the given material thickness, bending radius (R), and possible bending
length (L). This table can be a useful guide for parts with small U-profile (e.g.
clamps and pressers, etc.). The Xmin és Ymin dimensions can change with the
increase in the number of tools.
Carbon steel and Stainless steel and Aluminium
(/) Material
galvanized steel acid resistant steel (AlMg3)
R
thickness
- theoretical Tool Xmin Ymin L Xmin Ymin L XminYmin L
radius
R 0,6 v4 3,8 6,6 1500 3,8 6,6 1500 3,8 6,6 1500
0,8 R 0,8 v5 4,3 6,6 1500 4,3 6,6 1500 4,3 6,6 1500
R1 v6 4,8 6,6 1500 4,8 6,6 1500 4,8 6,6 1500
R 0,8 v5 4,5 6,6 1500 4,5 6,6 1500 4,5 6,6 1500
1 R1 v6 5 6,6 1500 5 6,6 1500 5 6,6 1500
R 1,2 v8 6 7 1500 6 7 1500 6 7 1500
R1 v6 5,2 6,6 1500 5,2 6,6 1500 5,2 6,6 1500
1,2 R 1,2 v8 6,2 7,4 1500 6,2 7,4 1500 6,2 7,4 1500
R 1,5 v10 7,2 8,4 1500 7,2 8,4 1500 7,2 8,4 1500
R 1,2 v8 6,5 8 3000 6,5 8 3000 6,5 8 3000
1,5 R 1,5 v10 7,5 9 3000 7,5 9 3000 7,5 9 3000
R 1,9 v12 8,5 10 3000 8,5 10 3000 8,5 10 3000
R 1,5 v10 8 10 3000 8 10 3000 8 10 3000
2 R 1,9 v12 9 11 3000 9 11 3000 9 11 3000
R 2,2 v14 10 12 3000 10 12 3000 10 12 3000
R 2,2 v14 10,5 13 3000 10,5 13 3000 10,5 13 3000
2,5 R 2,5 v16 11,5 14 3000 11,5 14 3000 11,5 14 3000
R 2,8 v18 12,5 15 3000 12,5 15 3000 12,5 15 3000
R 2,5 v16 12 15 3000 12 15 3000 12 15 3000
3 R 3,1 v22 15 18 3000 15 18 3000 15 18 3000
R 3,43 v25 17 20 3000 17 20 3000 17 20 3000
Z-profile
The Z-profile table details a special bending, the bending with the so called "Z"
tool, when the profile shown in the drawing is done in not 2 but 1 step, thanks to
the special characteristics of the tool. The table refers to the 90 ° angle which
means that during bending only the value in the table (X) for the given thickness
can be achieved, for the indicated max. bending length (Lmax.). Of course, we can
set many variations by changing the bending angle between 90° and 180°.
(/images/galeria/elhajilto_szerszamok/elhajlito-
szerszam-2nutos-1.JPG)
(/images/galeria/elhajilto_szerszamok/elhajlito-
szerszam-2nutos-2.JPG)
(/images/galeria/elhajilto_szerszamok/elhajlito-
szerszam-1.JPG)
(/images/galeria/elhajilto_szerszamok/elhajlito-
szerszam-2.JPG)
(/images/galeria/elhajilto_szerszamok/elhajlito-
szerszam-3.JPG)
(/)
(https://www.linkedin.com/company/melior-laser-k -)
(https://www.youtube.com/user/meliorlaser) (https://hu-hu.facebook.com/MeliorLaser)
(https://www.instagram.com/meliorlaser_metalfabrication/)
(/en/about-melior-laser/funds)