STROKE,
(ORLY HEN TURBINE 15 SHUT DOWN)
v
[We Vor Ona wane
SCREEN #1 |p ave Omd mmm &
scneen gg [PP Oe
ee vee oiner =y
>|
INCREASES OITHER
7] orcreases omer
SenEEN #3 |EP Vane out _ me ma
concen go [Bt Actusior mea 7|_[FES] enames act stRoxe
peasast/elorul INO] DISABLES ACT STROKE
[FP Vane to win mag 7] SETS ACT CUTPUT To uN
lvin Curr Adjust __* wn
SCREEN
INCREASES mA OUTPUT
DECREASES mA OUTPUT
[iP Vohe to nox a5 7]
SCREEN #5 | [ox curr Aaiust 7 m0
SETS ACT QUTPUT TO MAX
ENABLES MANUAL POSTN "ENTER™
D'SABLES MANUAL POSN “ENTER”
SREEN #7) Netroke HP Vave _* 204
INCREASES ACTUATOR UTPUT
DECREASES ACTUATOR QUTPUT
£5]
4)
¥
[res]
7
x
y¥
SETTER ELSA LEPFhosmon
4
[> vave to Min mag 7]
SCREEN SETS ACT OUTPUT TO uN
INCREASES mA OUTPUT
DECREASES mA OUTPUT
SETS ACT QUTPUT TO Max
[P va to Max ma3 7]
SEREEN 48] |yox curr Aghust__* 2
[ES] ENABLES WANUAL POS'N “ENTER?
[Monvaly Aalst mas 7]_[ [NO] OSSABLES WANUAL POS'W “ENTER
stroke LP Voie * wx
GRELTEMRN’S X2Pbosmon st on
Screen 4 shown only when the unit is shut down.
Screens 5-10 shown only when Stroke Actuctor is set to YES.
The asterisk (*) denotes o tunable porameter. To adjust this parameter, the “6”
symbol must be on the display line containing the osterisk. The @ symbol is moved
with the SELECT key.
NOTE: If changes are made to the Min or Max current values, they con be recorded
fon the PROGRAM MODE worksheets under the "Driver Configuration” header.
To save changes CLEAR must be pressed twice.