Professional Documents
Culture Documents
md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
刷机适配表V09.png
Qualcomm & Leadcore & Intel & Pinecone platform series devices flash
instruction
Summary
Contents Description
Support Models
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 1/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Data Backup
Fastboot mode flashing
How to enter FASTBOOT flashing mode
Flashing procedure
Emergency mode flashing
Mi 9 Lite
Mi A3
Redmi 7A
Mi 9T Pro(K20 Pro)
Mi 9T (K20)
Redmi 7
Mi 9 SE
Mi 9
Redmi Go
Redmi Note 7
Mi Mix 3
Mi 8 Pro
Mi 8 Lite
Redmi Note 6 Pro
POCO F1
Mi Max3
Mi A2
Mi A2 Lite/Redmi 6 Pro(India)
Mi 8
RedMi S2
Mi MIX 2S
Red Mi Note 5
Red Mi 5
Red Mi 5 Plus
Red Mi 5A
Mi Note 3
Mi MIX 2
Red Mi Note 5A/5A prime
A1
Mi Max 2
Mi 6
Mi 5C
Red Mi 4X
Red Mi Note 4X(Red Mi Note 4 Qualcomm)
Red Mi 4(China mainland)
Red Mi 4A
Red Mi 4prime
Mi Note2
Mi MIX
Mi 5s
Mi 5s Plus
Red Mi 3S/3X
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 2/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Max
Red Mi Note 3 SIM free
Mi 5
Mi 4S
Mi 4C
Red Mi 2A
Mi Note Series
Red Mi 2,Red Mi 2A Prime
Red Mi 3
Red Mi Note4G Single SIM
Mi 4 CMCC/CU/CT
Red Mi 1S CU/CT
Mi 3
Mi 2A
Mi 2/2S
Other method for Red Mi 2/Red Mi 3/Red Mi Note 4G Dual SIM/Red Mi 2A
Prime
Note and reminding
Change List
2019-8-1 Qualcomm & Leadcore &Intel & Pinecone platform series devices flash
instruction V23
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 3/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
2018-10-19 Qualcomm & Leadcore &Intel & Pinecone platform series devices flash
instruction V18
Summary
Contents Description
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 4/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
The Document mainly introduce the flashing methods of the Mi&Red Mi phone
models except MTK about fastboot mode flashing and emergency mode flashing
Support Models
All Mi series , Red Mi series.
Data Backup
Ensure all of data had been backup before flashing
Local Backup:backup all user data and app through device "Backup&Reset"
selection. This is most complete backup way, but due to backup data is stored in the
ROM of the phone, there will be some risks during the phone flashing, so please
coach customers to copy this backup file to local PC before flashing.
OS requirement:Windows 7 64 bit
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 5/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Tool download link:FTP servers, Google drive or Baidu drive (Detail link address
please contact with XiaoMi oversea technical support engineer)
NOTE:
1. MI PAD 2 cannot use this way to enter fastboot mode, but you can press
volume up + volume down + power key together to enter DNX mode. The
interface of DNX is white MI logo, and yellow “DNX FASTBOOT MODE”strings
can be found at left top corner,and the PAD 2 will skip to fastboot mode during
the flashing.
Flashing procedure
Open Miflash flashing tool, click "Browse" to choose related model MIUI package(The
connect path should get to the package name, do not need to reach the images
like old version.), then choose correct options from bottom three choices based on
real request. The flash_all_lock option can lock the bootloader after flashing.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 6/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Set the phone into fastboot mode, then connect it with PC, press
"Refresh" to detect the phone as below picture showed. Once the phone is detected,
then press flash to start MIUI flashing.
For Android One/Go system phones-Mi A1, Mi A2, Mi A2 lite, Mi A3, Redmi Go
Android one/go system phones support fastboot mode flashing directly. So you can
use XiaomiFlash to update the MIUI version in fastboot mode.
Detail flashing method, please refer the android one system phone flashing
instruction.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 7/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Please attention !! Each Android one/Go system device can not be flashing
between Android one/go system and MIUI system. It is forbidden to flash
whether from MIUI to Android One/Go or Android One/Go to MIUI.
Tool download link:FTP servers, Google drive or Baidu drive (Detail link address
please contact with XiaoMi oversea technical support engineer)
Flashing Method:
MiFlash is used for emergency flash, that is same with fastboot flashing.
But the difference is the COM port will be showed for emergency flashing after device
connected(except Mi 5C),and all data will be erased after emergency flashing no
matter which option is selected at the bottom.
Mi 9 Lite
Power off the phone, disassemble the back cover as below picture. Short connect two
pins with tweezer as below picture showed, then connect device with PC through USB
cable, if below information pop up, that means the device is under the emergency
flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 8/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi A3
Power off the phone, disassemble the back cover as below picture. Short connect two
pins with tweezer as below picture showed, then connect device with PC through USB
cable, if below information pop up, that means the device is under the emergency
flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.h… 9/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Redmi 7A
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 10/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 9T Pro(K20 Pro)
Use specific EDL flashing cable to set the phone to 9008 mode.And just need to connect
the power off status phone and PC with EDL cable directly,then the 9008 com port can be
found in device management.
EDL cable Part Number: SCNC030058400
Mi 9T (K20)
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 11/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Redmi 7
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 12/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 9 SE
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 13/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 9
Method 1: == Use specific EDL flashing cable to set the phone to 9008 mode.And just
need to connect the power off status phone and PC with EDL cable directly,then the 9008
com port can be found in device management.
EDL cable Part Number: SCNC030058400
Method 2: If you don't have the specific EDL flashing cable, please power off the
phone, disassemble the back cover and remove the Fingerprint module and small
protect cover as below picture .Short connect two pins with tweezer as below picture
showed, then connect device with PC through USB cable, if below information pop up,
that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 14/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Redmi Go
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 15/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Redmi Note 7
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 16/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Mix 3
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 17/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 8 Pro
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 18/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 8 Lite
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 19/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 20/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
POCO F1
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 21/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Max3
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 22/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi A2
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 23/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi A2 Lite/Redmi 6 Pro(India)
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 24/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 8
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 25/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
RedMi S2
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 26/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi MIX 2S
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 27/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi Note 5
Power off the phone, disassemble the back cover and remove the Fingerprint module
and small protect cover as below picture .Short connect two pins with tweezer as
below picture showed, then connect device with PC through USB cable, if below
information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 28/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 5
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 29/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 5 Plus
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 30/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 5A
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 31/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Note 3
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 32/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi MIX 2
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 33/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 34/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
A1
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
Then click flash button.
Note: Please attention !! Each device can not be flashing between Android one
system and MIUI system. It is forbidden to flash whether from MIUI to Android
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 35/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Max 2
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 36/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 6
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 37/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 5C
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
"Android ADB Interface"
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 38/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 4X
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
Then click flash button.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 39/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 40/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 4A
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 41/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 4prime
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
“Qualcomm HS-USB QDLoader 9008(COM XX)”.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 42/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Note2
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 43/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi MIX
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 44/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 5s
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 45/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 5s Plus
Power off the phone, disassemble the back cover .Short connect two pins with
tweezer as below picture showed, then connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 46/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 3S/3X
First power off the device, remove the SIM tray, open the battery cover
and back cover, short connect two pins as below picture showed, then connect the
device with PC through USB cable, if below information pop up in the device
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 47/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
management, that means the device is under the emergency flash mode.
Mi Max
First power off the device, remove the SIM tray, open the battery cover
and back cover, short connect two pins as below picture showed, then connect the
device with PC through USB cable, if below information pop up in the device
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 48/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
management, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 49/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
management, that means the device is under the emergency flash mode.
Mi 5
First power off the device, remove the SIM tray, open the battery cover
and back cover, short connect two pins as below picture showed, then connect the
device with PC through USB cable, if below information pop up in the device
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 50/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
management, that means the device is under the emergency flash mode.
Mi 4S
First power off the device, remove the SIM tray, open the battery cover
and back cover, short connect two pins as below picture showed, then connect the
device with PC through USB cable, if below information pop up in the device
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 51/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
management, that means the device is under the emergency flash mode.
Mi 4C
First power off the device, remove the SIM tray, open the battery cover
and back cover, short connect two pins as below picture showed, then connect the
device with PC through USB cable, if below information pop up in the device
management, that means the device is under the emergency flash mode.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 52/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Red Mi 2A
First open the lcflash_all.bat script, then keep pressing down volume up key under
device power off status, connect the device with PC through USB cable, then some
ports information can be found in the device management as below picture showed (If
the driver has some problems, please download and install
http://pan.baidu.com/s/1bnk3PIR,X86 for 32 bit system, and X64 for 64 bit
system),emergency flash will auto start and success can be found after flashing。
(NOTE: this model don't need the emergency mode tool, just run the script to finish
the emergency flash.)
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 53/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 54/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi Note Series
First power off Mi Note/Mi Note ultimate, remove the original SIM tray, then protect the
edge of the SIM tray with sticker as below picture showed (Note: Sticker must be
removed and clean up all remained adhesive after repairing). Insert the specific SIM
tray and connect the device with PC through USB cable, if below information pop up
in the device management, that means the device is under the emergency flash
mode.
showed, then put into the battery and connect device with PC through USB cable, if
below information pop up, that means the device is under the emergency flash mode.
Red Mi 3
First ensure the device is under the power off status, according to the instruction to
disassemble the back cover, Short connect two pins with tweezer as below picture
showed, then put into the battery and connect device with PC through USB cable, if
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 56/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
below information pop up, that means the device is under the emergency flash mode.
Mi 4 CMCC/CU/CT
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 57/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
The specific SIM tray is needed for Mi 4 emergency mode setting. Please power off
the device first, then remove the original SIM tray and insert specific SIM tray. Please
take care the direction and ensure the MI LOGO side up.
Connect the device with PC through USB cable, if below information pop
up, that means the device is under the emergency flash mode.
Red Mi 1S CU/CT
Disassemble the battery, and connect the device with PC through USB cable. Short
connect two pins under SIM card with metal tool as below picture showed, force boot
up bottom-driver to recognize the USB port. Please short connect the pin first, then
insert the USB cable.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 58/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 3
MI3 CMCC and CU need specific SIM tray to set emergency flash mode as below
picture showed. And please power off the device first, then insert this special SIM tray.
Mi 2A
Disassemble the battery, and connect the device with PC through USB
cable. Short connect two pins under SIM card with metal tool as below picture
showed, force boot up bottom-driver to recognize the USB port. Please short connect
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 59/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
Mi 2/2S
Disassemble the battery, and connect the device with PC through USB cable. Short
connect two pins under SIM card with metal tool as below
pictuere showed, force boot up bottom-driver to recognize the USB port
Please short connect the pin first, then insert the USB cable, then the
correct driver can boot up. And please take care the battery socket when connecting
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 60/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
ground.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 61/62
2019/8/2 filename.md---小书匠,在线编辑器,MARKDOWN,Evernote,文件版本
6.1.14 developer or later developer version, fastboot flash cannot be used for them,
so please use emergency flashing.
file:///D:/Qualcomm%20&%20Leadcore%20&%20Intel%20&%20Pinecone%20platform%20series%20devices%20flash%20instruction%20V23.… 62/62