Professional Documents
Culture Documents
32-bit Counter
±4 kV ESD Protection
RoHS Compliant
M-7084
4-/8-channel Counter/Frequency/Encoder Input Module
Introduction Applications
The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module Counter Measurement, Frequency Measurement and Encoder Motion Control.
that offers a variety of mode options, including "Up Counter”, "Frequency
Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter"
modes. The mode combinations can be individual set for all 8 channels,
where some channels can be set to “Up Counter” mode and other channels
can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder
input” mode. The built-in digital filter can filter out noise where the high/ low
pulse width is smaller than the minimum high/low width of the digital filter.
The M-7084W provides a virtual battery backup function in counter mode.
CA4 -
CA4+
CB2 -/CA3 -
CB2+/CA3+
CA2 -
CA2+
CB0 -/CA1 -
CB0+/CA1+
CA0 -
CA0+
CA0+
LED CA0 -
+5 V
EEPROM
CA1+/CB0+
CB4+/CA5+
CB6+/CA7+
CB4 -/CA5 -
CB6 -/CA7 -
CA2 -/CB0 -
(Y)DATA+
Embedded
(G)DATA-
(B)GND
Controller
(R)+Vs
+5 V
CA6+
CA6 -
CA6+
Wire Connections
Counter Type
Up+ CAx+
Up
Up - CAx-
Up+ CAx+
Up - CAx-
Up/Down
Down+ CBx+
Down - CBx-
Pulse+ CAx+
Pulse - CAx-
Dir/Pulse
Dir+ CBx+
Dir - CBx-
A0+ CAx+
A0 - CAx-
A/B Phase
B0+ CBx+
B0 - CBx-
Frequency Type
Freq+ CAx+
Frequency
Freq - CAx-
Ordering Information
M-7084-G CR 4-/8-channel Counter/Frequency/Encoder Input Module (RoHS)
Accessories