Professional Documents
Culture Documents
SOLUTION REPORT
Q. 1
A transparent
B unchanging
C profilic
Solution :
(d)
Option ‘d’ is the correct option. The meaning of the word OUTLANDISH
is strange or unconventional or not traditional; CONVENTIONAL is the
opposite of this word.
QUESTION ANALYTICS
Q. 2
Choose the most appropriate word to fill in the blanks in the given sentence:
Instead of presenting a balanced view of both sides of the issue, the speaker
became increasingly ________, insisting on the correctness of the position.
FAQ Solution Video Have any Doubt ?
A ambiguous
Solution :
(b)
Option ‘b’ is the correct option. The use of ‘,’ after the word to be filled
indicates that the word has to be something to with RIGIDITY or
DOGMATIC. The speaker is becoming arrogant and trying to justify the
stand taken by him/her.
C tactful
D inarticulate
QUESTION ANALYTICS
Q. 3
Fill in the blanks with most appropriate pair of words so as to make a logically
meaningful sentence. Because Karishma’s parents often ______ their plans as
soon as they were formed, she assumed that all adults were as ______ as her
parents.
FAQ Solution Video Have any Doubt ?
A cancelled, indulgent
B altered, obstinate
Solution :
(c)
The word ‘mercurial’ means ‘quickly changeable’. In the given statement,
missing word in the second part of the sentence will indicate the
characteristics of a person who changes his/her plans very often.
D solidified, capricious
QUESTION ANALYTICS
Q. 4
Pankaj buys a table and a chair at price ratio 5 : 3. He sells the table at x% loss
and chair at y% profit such that overall there is no profit no loss. If the total
selling price of table and chair together is Rs.1600, then the possible values
of x and y can be respectively
FAQ Solution Video Have any Doubt ?
A 30 and 40
B 24 and 36
Solution :
(c)
D 9 and 12
QUESTION ANALYTICS
Q. 5
18 Correct Option
Solution :
18
A careful look will tell you that each subsequent term is made by
multiplying the digits of the number i.e. 77 is followed by 7 × 7 = 49
which is followed by 4 × 9 = 36 and that leads us to the next number
being 3 × 6 = 18.
QUESTION ANALYTICS
Q. 6
Solution :
(c)
Given that all senior schools are colleges and some primary schools are
senior schools which leads to the conclusions that “all those primary
schools which are senior schools are colleges” i.e. some of the colleges
i h l i ti ‘ ’
are primary schools i.e. option ‘c’.
QUESTION ANALYTICS
Q. 7
Given A and B are 2 distinct numbers such that A2 = 2002 + B and B2 = 2002
+ A. The value of AB is
FAQ Solution Video Have any Doubt ?
A 2001
Solution :
(b)
C –2000
D 1
QUESTION ANALYTICS
Q. 8
The metro service has trains going from Mumbai to Pune and Pune to Mumbai
every hour. The first one from either stations starts at 6 AM. The trip from one
city to another takes four and half hours and all the trains travel at same speed.
If a train starts at 12 noon from Mumbai towards Pune, then the number of
trains it will pass in its entire journey is
FAQ Solution Video Have any Doubt ?
A 7
B 8
C 9 Correct Option
Solution :
(c)
D 10
QUESTION ANALYTICS
Q. 9
6 men and 8 women can complete a work in 10 days. 26 men and 48 women
can complete the same work in 2 days. 15 men and 20 women can do the same
work in
FAQ Solution Video Have any Doubt ?
A 2 days
B 3 days
Solution :
(c)
D 5 days
QUESTION ANALYTICS
Q. 10
There are two groups of students A and B in a sports academy which offers
g p p y
three games volley ball, basket ball, baseball. The ratio of the total number of
students playing volleyball, basket ball and base ball is 3 : 4 : 5 in both the
groups. If the ratio of the total number of students in groups A and B is 2 : 3 and
there are 40 more students in group B than group A who plays baseball, then the
total number of students is _________.
FAQ Solution Video Have any Doubt ?
Solution :
480
QUESTION ANALYTICS
Q. 11
A 0.5 m/s
B 5 m/s
D 2.5 m/s
QUESTION ANALYTICS
Q. 12
Correct Option
D Correct Option
Solution :
(d)
QUESTION ANALYTICS
Q. 13
A g
C Correct Option
Solution :
(c)
(c)
QUESTION ANALYTICS
Q. 14
For a cutting tool, the value of rake angle is 0°. The minimum value of shear
strain is
FAQ Solution Video Have any Doubt ?
A 0
B 1
C 2 Correct Option
Solution :
(c)
D 3
QUESTION ANALYTICS
Q. 15
B Correct Option
Solution :
(b)
C 2
QUESTION ANALYTICS
Q. 16
The strain energy stored in a cube of 50 mm, when it is subjected to shear stress
of 200 MPa is (Given G = 100 GPa )
FAQ Have any Doubt ?
A 25 Nm Correct Option
Solution :
(a)
B 75 Nm
C 125 Nm
D 150 Nm
QUESTION ANALYTICS
Q. 17
A pendulum bob has a speed 3 m/s while passing through its lowest position. If
the length of the pendulum is 0.5 m, then the speed of the bob when it makes an
angle of 60° with the vertical is (Take g = 10 m/s2)
FAQ Solution Video Have any Doubt ?
A 1 m/s
B 1.5 m/s
Solution :
(c)
D 2.5 m/s
QUESTION ANALYTICS
Q. 18
A 49 m/s2
B 48 m/s2
Solution :
(c)
D 46 m/s2
QUESTION ANALYTICS
Q. 19
B 47 mm
C 40 mm Correct Option
Solution :
(c)
D 35 mm
QUESTION ANALYTICS
Q. 20
A III only
B I only
C II and III
Solution :
(d)
(i) As the number of contact surfaces increase, for the same torque
capacity, multi-plate clutch construction is compact.
(ii) As there are more contact friction surfaces, heat generated is more in
multi-plate clutch.
QUESTION ANALYTICS
Q. 21
Solution :
(a)
QUESTION ANALYTICS
Q. 22
The pressure drop for a relatively low Reynolds number, flow in a 500 mm
diameter and 30 m long horizontal pipeline is 80 kPa. The wall shear stress is
FAQ Solution Video Have any Doubt ?
A
C Correct Option
Solution :
(c)
QUESTION ANALYTICS
Q. 23
For a gas turbine power plant, identify the correct pair of statements.
1. Smaller in size compared to steam power plant for same power output.
2. Starts quickly compared to steam power plant.
3. Works on the principle of Rankine cycle.
4. Good compatibility with solid fuel.
FAQ Solution Video Have any Doubt ?
B 3 and 4
C 2 and 3
D 1 and 4
QUESTION ANALYTICS
Q. 24
If the curve C is a straight line drawn from z = –2i to z = 2i, then the value of
A 0 Correct Option
Solution :
(a)
B 2i
C 4i
D –2i
QUESTION ANALYTICS
Q. 25
A coin is biased such that head is twice as likely to occur as tail. If the coin is
tossed 3 times, the probability of getting exactly 2 tails is
FAQ Solution Video Have any Doubt ?
A Correct Option
Solution :
(a)
B
B
QUESTION ANALYTICS
Q. 26
Solution :
0.35
QUESTION ANALYTICS
Q. 27
Solution :
1440 (1435 - 1445)
QUESTION ANALYTICS
Q. 28
For the PERT network, the activities whose three time estimates are given in the
table
Solution :
2.23 (2.22 - 2.24)
QUESTION ANALYTICS
Q. 29
Solution :
7.692 (7.60 - 7.80)
QUESTION ANALYTICS
Q. 30
During turning a metallic rod at a given condition, the tool life was found to
increase from 25 min to 50 min when cutting velocity was reduced from 100
m/min to 80 m/min. The life of machine tool is _________ min, if machined at
90 m/min.
FAQ Solution Video Have any Doubt ?
Solution :
34.67 (33.5 - 35.5)
QUESTION ANALYTICS
Q. 31
QUESTION ANALYTICS
Q. 32
Solution :
1.539 (1.52 - 1.55)
QUESTION ANALYTICS
Q. 33
80 Correct Option
Solution :
80
QUESTION ANALYTICS
Q. 34
If
then the value of x2 + y2 is _____.
FAQ Solution Video Have any Doubt ?
Solution :
442
QUESTION ANALYTICS
Q. 35
Solution :
67.79 (67.60 - 68.00)
QUESTION ANALYTICS
Q. 36
If the irreversibility rate for this process is 150 kW, then the temperature T2 is
FAQ Solution Video Have any Doubt ?
A 200 K
B 250 K
300 K C O i
C 300 K Correct Option
Solution :
(c)
D 400 K
QUESTION ANALYTICS
Q. 37
A 17 ± 0.05 mm
B 17 ± 0.02 mm
C 17 ± 0.01 mm
Solution :
(d)
QUESTION ANALYTICS
Q. 38
A reservoir has a head of 40 m and a channel leading from the reservoir permits
a flow rate of 40 m3/s. If the rotational speed of the rotor is 120 rpm, then the
most suitable type of turbine to use is:
FAQ Solution Video Have any Doubt ?
l ih li l j
B Pelton with multiple jet
Solution :
(c)
D Kaplan
QUESTION ANALYTICS
Q. 39
A plate clutch consists of two pairs of contacting surfaces with asbestos friction
lining and has the
following parameter :
Outer diameter of friction lining = 300 mm
Inner diameter of friction lining = 150 mm
Coefficient of friction = 0.45
Maximum engine torque = 220 Nm
The clamping force is provided by 8 springs, each give a force of 600 N. The
factor of safety with respect to slippage after initial wear has occurred is
FAQ Solution Video Have any Doubt ?
A 1.10
Solution :
(b)
C 2.62
D 3.88
QUESTION ANALYTICS
Q. 40
If two shafts of the same length, one of which is hollow, transmit equal torque
and have equal maximum stress, then they should have equal
FAQ Have any Doubt ?
l i d l C O i
B polar section modulus Correct Option
Solution :
(b)
C diameter
D angle of twist
QUESTION ANALYTICS
Q. 41
A 12.4 mm
B 12.78 mm
Solution :
(c)
D 11.25 mm
QUESTION ANALYTICS
Q. 42
A 1 Correct Option
Solution :
(a)
B 2
C 3
D 0
QUESTION ANALYTICS
Q. 43
The pulley shown in the figure has a moment of inertia mR2 where m is the
mass and R is the radius. The natural frequency of vibration is
B
C Correct Option
Solution :
(c)
QUESTION ANALYTICS
Q. 44
The following data is given for a 360° hydrodynamic bearing:
Radial load = 12 kN
Journal speed = 1500 rpm
Clearance ratio = 850
Viscosity = 35 centipoise
Journal diameter = 100 mm
Assuming a square journal bearing, the Sommerfeld number is
FAQ Solution Video Have any Doubt ?
A 52.68
B 5.268
C 0.05268
Solution :
(d)
QUESTION ANALYTICS
Q. 45
Solution :
(a)
B 75 kN (Tension)
C 96 kN (Tension)
D 96 kN (Compression)
QUESTION ANALYTICS
Q. 46
A 2.17
Solution :
(b)
C 1.17
D 4.17
QUESTION ANALYTICS
Q. 47
A solid shaft of diameter D, modulus of elasticity E, is fixed at one end and free
at another end. It is subjected to a point load P at the free end. Now if the load
intensity becomes diameter becomes 2D and modulus of elasticity becomes
2E, then the ratio of strain energy in second case to the first case is n × 10(–3).
Then the value of n is
FAQ Have any Doubt ?
A 8.901
B 8.901
Solution :
(c)
D 4.321
QUESTION ANALYTICS
Q. 48
A simply supported beam is loaded with a gradual varying load as shown in the
figure. The ratio of shear force at point A to that of point Bwill be
A 2 Correct Option
Solution :
(a)
( )
B 4
C 6
D 3
QUESTION ANALYTICS
Q. 49
The net workdone for the closed system shown in the figure is _____________
kJ.
FAQ Solution Video Have any Doubt ?
A 1000 kJ
B 1125 kJ
Solution :
(c)
D 1400 kJ
QUESTION ANALYTICS
Q. 50
A 38.4
Solution :
(b)
C 6.4
D 19.2
QUESTION ANALYTICS
Q. 51
A 250
B 51
C 255 Correct Option
Solution :
(c)
D 500
QUESTION ANALYTICS
Q. 52
A cylindrical shape metal rod is 10 m long and has a heat release of 500 kW.
The thermal conductivity of metal is 40 W/mK. The temperature difference
between the surface and centre of the rod is ___________°C.
Assume that the heat release is uniform along the rod.
FAQ Solution Video Have any Doubt ?
QUESTION ANALYTICS
Q. 53
QUESTION ANALYTICS
Q. 54
10 Correct Option
Solution :
10
QUESTION ANALYTICS
Q. 55
Water (cp = 4.187 kJ/kgK) is heated at a rate of 1.4 kg/s from 40°C to 70°C by
an oil entering at 110°C and leaving at 60°C in a counter flow heat exchanger.
If U0 = 350 W/m2K, then the surface area required is _________ m2.
FAQ Solution Video Have any Doubt ?
Solution :
17.42 (17.3 - 17.5)
QUESTION ANALYTICS
Q. 56
An ideal regenerative Brayton cycle is shown in the T-s diagram. The efficiency
of the cycle is ________%.
(Take γ = 1.4)
FAQ Solution Video Have any Doubt ?
Solution :
31.56 (31 - 32)
QUESTION ANALYTICS
Q. 57
Air enters a compressor in steady flow manner at 140 KPa and 17°C and leaves
it at 350 KPa and 127°C. During the flow change in enthalpy and kinetic energy
are 110.55 kJ/kg and 3.6 kJ/kg respectively. The minimum reversible work
input required is ________ kJ/kg.
[Given: Environment temperature is 7°C]
FAQ Have any Doubt ?
QUESTION ANALYTICS
Q. 58
Solution :
11.729 (11 - 12)
QUESTION ANALYTICS
Q. 59
Solution :
216
QUESTION ANALYTICS
Q. 60
The standard deviation of the critical path of the project is days. The
value of n is ____________.
FAQ Solution Video Have any Doubt ?
Solution :
151
QUESTION ANALYTICS
Q. 61
A company X consumes 4380 units annually (365 days). If the re-order point is
108 units, then the delivery lead time is ____________ days.
FAQ Solution Video Have any Doubt ?
9 Correct Option
Solution :
9
QUESTION ANALYTICS
Q. 62
Solution :
9.0687 (8.95 - 9.1)
QUESTION ANALYTICS
Q. 63
The following data is given for an oil engine working on ideal diesel cycle:
Compression ratio = 20
Inlet pressure and temperature = 1 bar and 67°C. Heat addition at constant
pressure take place up to 10% of the stroke.
The temperature at the end of the heat additionwill be ___________ K.
FAQ Solution Video Have any Doubt ?
Solution :
3268 06 (3260 3275)
3268.06 (3260 - 3275)
QUESTION ANALYTICS
Q. 64
Solution :
2.12 (2.00 - 2.25)
QUESTION ANALYTICS
Q. 65
31 Correct Option
Solution :
31