Professional Documents
Culture Documents
Omron FL-V - Lighting - Lens - SelectionGuide
Omron FL-V - Lighting - Lens - SelectionGuide
FLV Series
Standard Models
FLV-DR Series/-DL Series
Order Information
Connectable Option Connectable Lighting Controller *
Electricity Weight Camera-mount Analog Lighting Dimensions
Model Light Color
(W) (g) Diffusion Plates Lighting Controller Controller
FLV-TCC Series FLV-ATC Series
Direct FLV-DR3220W White 1.2 60 FLV-DR3220DF A
Ring FLV-DR3220R Red 1.2 60 FLV-DR3220DF A
Lighting
FLV-DR3220B Blue 1.2 60 FLV-DR3220DF A
FLV-DR5030W White 2.4 60 FLV-DR5030DF B
FLV-DR5030R Red 1.6 60 FLV-DR5030DF B
FLV-DR5030B Blue 2.4 60 FLV-DR5030DF B
FLV-DR5030IR Infrared Light 1.5 60 FLV-DR5030DF B
FLV-DR5030UV Ultraviolet Light 2.9 60 FLV-DR5030DF B
FLV-DR6615W White 3.4 120 FLV-DR6615DF C
FLV-DR6615R Red 2.4 120 FLV-DR6615DF C
FLV-DR6615B Blue 3.4 120 FLV-DR6615DF C
FLV-DR7000W White 3.6 110 FLV-DR7000DF D
FLV-DR7000R Red 2.4 110 FLV-DR7000DF D
FLV-DR7000B Blue 3.6 110 FLV-DR7000DF D
FLV-DR7030W White 3.6 120 FLV-DR7030DF E
FLV-DR7030R Red 2.4 120 FLV-DR7030DF E
FLV-DR7030B Blue 3.6 120 FLV-DR7030DF E
FLV-DR7030IR Infrared Light 2.4 120 FLV-DR7030DF E
FLV-DR7030UV Ultraviolet Light 5.3 120 FLV-DR7030DF E
FLV-DR9000W White 6.3 230 FLV-DR9000DF F
FLV-DR9000R Red 4.4 230 FLV-DR9000DF F
FLV-DR9000B Blue 6.3 230 FLV-DR9000DF F
FLV-DR9030W White 5.8 200 FLV-DR9030DF G
FLV-DR9030R Red 4.4 200 FLV-DR9030DF G
FLV-DR9030B Blue 5.8 200 FLV-DR9030DF G
FLV-DR9030IR Infrared Light 3.9 200 FLV-DR9030DF G
FLV-DR9030UV Ultraviolet Light 6.8 200 FLV-DR9030DF G
FLV-DR9215W White 5.3 200 FLV-DR9215DF H
FLV-DR9215R Red 4.6 200 FLV-DR9215DF H
FLV-DR9215B Blue 5.3 200 FLV-DR9215DF H
FLV-DR12030W White 8.7 360 FLV-DR12030DF I
FLV-DR12030R Red 6.5 360 FLV-DR12030DF I
FLV-DR12030B Blue 8.7 360 FLV-DR12030DF I
Low FLV-DL5890W White 1.6 90 FLV-DL5890DF J
Angle FLV-DL5890R Red 1.2 90 FLV-DL5890DF J
Ring
Lighting FLV-DL5890B Blue 1.6 90 FLV-DL5890DF J
FLV-DL7260W White 4.4 120 FLV-DL7260DF K
FLV-DL7260R Red 3.5 120 FLV-DL7260DF K
FLV-DL7260B Blue 4.4 120 FLV-DL7260DF K
FLV-DL9090W White 2.4 100 - L
FLV-DL9090R Red 1.6 100 - L
FLV-DL9090B Blue 2.4 100 - L
FLV-DL12060W White 11.6 310 FLV-DL12060DF M
FLV-DL12060R Red 7.7 310 FLV-DL12060DF M
FLV-DL12060B Blue 11.6 310 FLV-DL12060DF M
FLV-DL15060W White 13.5 260 FLV-DL15060DF N
FLV-DL15060R Red 10.1 260 FLV-DL15060DF N
FLV-DL15060B Blue 13.5 260 FLV-DL15060DF N
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
1
Lightings
FLV Series
Standard Models Direct Ring Lighting/Low Angle Ring Lighting FLV-DR Series/-DL Series
Dimensions
●Direct Ring Lighting
10
A FLV-DR3220@ B FLV-DR5030@ 8 8
10
3.5Dia. LENGTH 0.8M 8 8 3.5Dia. LENGTH 0.8M
Minimum bending radius 20 Minimum bending radius 20
11.6Dia.
3.5 3.5
21.5
21.5
10Dia.
P.C.D.38 ±0.1
27.1Dia.
26.5Dia.
46Dia.
50Dia.
M50
P.C.D.20 ±0.1
MOUNTING PART)
(MOUNTING SCREW HOLES) 16 EMITTING SURFACE
M32
4-M4 DEPTH4 EQUAL LAYOUT
(MOUNTING SCREW HOLES) 13 EMITTING SURFACE
4-M3 DEPTH3 EQUAL LAYOUT g.
Tightening torque: 0.54N · m 30De Tightening torque: 0.54N · m
C FLV-DR6615@ 10 D FLV-DR7000@ 10 P.C.D.65 ±0.1
8 8 8
8
21.5 3.5Dia. LENGTH 0.8M 62Dia.
3.5Dia. LENGTH 0.8M Minimum bending radius 20 34.5Dia.
21.5
Minimum bending radius 20
5
P.C.D.54 ±0.1
MOUNTING PART)
70Dia.
33Dia.
M70
P.C.D.50 ±0.1
33Dia.
61Dia.
66Dia.
31Dia.
M66
3.5
(MOUNTING SCREW HOLES) (AN OPTIONAL EXTRA
15Deg. 4-M3 DEPTH6 17
MOUNTING SCREW HOLES)
(MOUNTING SCREW HOLES) EMITTING SURFACE
4-M3 DEPTH4 EQUAL LAYOUT 17 4-M1.4 DEPTH3.2 EQUAL LAYOUT
Tightening torque: 0.54N · m Tightening torque: 0.54N · m
E FLV-DR7030@ 10
8
F FLV-DR9000@
21.5
10
8
3.5Dia. LENGTH 0.8M 8
Minimum bending radius 20 3.5Dia. LENGTH 0.8M
3.5 31.8Dia. Minimum bending radius 20 EMITTING SURFACE
21.5
(AN OPTIONAL EXTRA MOUNTING PART)
P.C.D.70 ±0.1
P.C.D.86 ±0.1
31Dia.
P.C.D.54 ±0.1
90Dia.
30Dia.
70Dia.
30Dia.
64Dia.
M70
18
(MOUNTING SCREW HOLES) (AN OPTIONAL EXTRA
4-M3 DEPTH4 EQUAL LAYOUT MOUNTING SCREW HOLES)
g. 4-M1.4 DEPTH4 EQUAL LAYOUT
(MOUNTING SCREW HOLES) 30De EMITTING SURFACE
4-M3 DEPTH4 EQUAL LAYOUT 20
Tightening torque: 0.54N · m Tightening torque: 0.54N · m
G FLV-DR9030@ H FLV-DR9215@
10
8
10
21.5
8
3.5Dia. LENGTH 0.8M 8
Minimum bending radius 20 Minimum bending radius 20 21.5
3.5
(AN OPTIONAL EXTRA
(AN OPTIONAL EXTRA
MOUNTING PART)
MOUNTING PART)
41.7Dia.
P.C.D.74 ±0.1
84Dia.
P.C.D.70 ±0.1
3.5
48.8Dia.
90Dia.
40Dia.
92Dia.
47Dia.
M92
86Dia.
M90
I FLV-DR12030@ 10
8
P.C.D.115 ±0.1
120Dia.
60Dia.
112Dia.
61Dia.
.
30Deg
(MOUNTING SCREW HOLES) (AN OPTIONAL EXTRA
4-M3 DEPTH5 EQUAL LAYOUT 26 MOUNTING SCREW HOLES)
M1.4 DEPTH2.8 EQUAL LAYOUT
Tightening torque: 0.54N · m
2
Lightings
Direct Ring Lighting/Low Angle Ring Lighting FLV-DR Series/-DL Series
FLV Series
Standard Models
●Low Angle Ring Lighting
J FLV-DL5890@ K FLV-DL7260@
L FLV-DL9090@ M FLV-DL12060@
N FLV-DL15060@
3
Lightings
Bar Lighting
FLV Series
Standard Models
FLV-BR Series
Order Information
Connectable Option Connectable Lighting Controller *
Electricity Weight Camera-mount Analog Lighting
Model Light Color Dimensions
(W) (g) Diffusion Plates Lighting Controller Controller
FLV-TCC Series FLV-ATC Series
FLV-BR6022W White 1.2 60 FLV-BR6022DF A
FLV-BR6022R Red 1.2 60 FLV-BR6022DF A
FLV-BR6022B Blue 1.2 60 FLV-BR6022DF A
FLV-BR6022IR Infrared Light 0.9 60 FLV-BR6022DF A
FLV-BR6022UV Ultraviolet Light 1.7 60 FLV-BR6022DF A
FLV-BR8532W White 3.9 130 FLV-BR8532DF B
FLV-BR8532R Red 2.9 130 FLV-BR8532DF B
FLV-BR8532B Blue 3.9 130 FLV-BR8532DF B
FLV-BR11222W White 2.4 100 FLV-BR11222DF C
FLV-BR11222R Red 2 100 FLV-BR11222DF C
FLV-BR11222B Blue 2.4 100 FLV-BR11222DF C
FLV-BR11222IR Infrared Light 1.7 100 FLV-BR11222DF C
FLV-BR11222UV Ultraviolet Light 3.9 100 FLV-BR11222DF C
FLV-BR14030W White 6 140 FLV-BR14030DF D
FLV-BR14030R Red 4.1 140 FLV-BR14030DF D
FLV-BR14030B Blue 6 140 FLV-BR14030DF D
FLV-BR15020W White 2.9 120 FLV-BR15020DF E
FLV-BR15020R Red 2.4 120 FLV-BR15020DF E
FLV-BR15020B Blue 2.9 120 FLV-BR15020DF E
FLV-BR21222W White 6 140 FLV-BR21222DF F
FLV-BR21222R Red 4.4 140 FLV-BR21222DF F
FLV-BR21222B Blue 6 140 FLV-BR21222DF F
FLV-BR21230W White 8.4 220 FLV-BR21230DF G
FLV-BR21230R Red 6.8 220 FLV-BR21230DF G
FLV-BR21230B Blue 8.4 220 FLV-BR21230DF G
FLV-BR21230IR Infrared Light 6 220 FLV-BR21230DF G
FLV-BR21230UV Ultraviolet Light 13 220 FLV-BR21230DF G
FLV-BR38037W White 14.9 430 FLV-BR48031DF H
FLV-BR38037R Red 11.6 430 FLV-BR48031DF H
FLV-BR38037B Blue 14.9 430 FLV-BR48031DF H
FLV-BR48031W White 17.6 460 FLV-BR48031DF ✕ I
FLV-BR48031R Red 15.9 460 FLV-BR48031DF ✕ I
FLV-BR48031B Blue 17.6 460 FLV-BR48031DF ✕ I
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
4
Lightings
Bar Lighting FLV-BR Series
FLV Series
Standard Models
Dimensions
A FLV-BR6022@ B FLV-BR8532@
C FLV-BR11222@ D FLV-BR14030@
E FLV-BR15020@ F FLV-BR21222@
G FLV-BR21230@ H FLV-BR38037@
5
Lightings
Coaxial Lighting
FLV Series
Standard Models
FLV-CL Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-CL30W White 2 110 A
FLV-CL30R Red 1.1 110 A
FLV-CL30B Blue 2 110 A
FLV-CL40W White 3.6 170 B
FLV-CL40R Red 2.2 170 B
FLV-CL40B Blue 3.6 170 B
FLV-CL60W White 9.2 380 C
FLV-CL60R Red 4.8 380 C
FLV-CL60B Blue 9.2 380 C
FLV-CL60IR Infrared Light 3.9 380 C
FLV-CL60UV Ultraviolet Light 9.2 380 C
FLV-CL80W White 14.4 580 D
FLV-CL80R Red 9.6 580 D
FLV-CL80B Blue 14.4 580 D
FLV-CL100W White 21.2 820 ✕ E
FLV-CL100R Red 14 820 E
FLV-CL100B Blue 21.2 820 ✕ E
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted. : Connectable. Light can be emitted only while the trigger is input. ✕: Not connectable
Dimensions
6 34 EMITTING SURFACE
A FLV-CL30@ 6 25 EMITTING SURFACE B FLV-CL40@ 20
15 3.5Dia. LENGTH 0.8M 3.5Dia. LENGTH 0.8M
Minimum bending radius 20 Minimum bending radius 20
40
20
32
15
21.5
21.5
18.5 8
24 EMITTING SURFACE
22
32 EMITTING SURFACE
12
15 ±0.1
31
20 ±0.1
40
8
10
15 ±0.1
Tightening torque: 1.2N · m
8
20 ±0.1
10
36
78
52
8
21.5
33
51 EMITTING SURFACE
43
104 20 RADIATION SPACE
72 EMITTING SURFACE
13
60.5
50 ±0.1
77.5
25 ±0.1
10
8
72
8
21.5
(MOUNTING
SCREW HOLES) 53
6-M5 DEPTH3 141 20 RADIATION SPACE
20
60 ±0.1
99.5
8
10
30 ±0.1 30 ±0.1
Tightening torque: 2.3N · m
6
Lightings
Shadowless Lighting
FLV Series
Standard Models
FLV-FS Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FS74W White 4.1 140 A
FLV-FS74R Red 2.9 140 A
FLV-FS74B Blue 4.1 140 A
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-FS74@
7
Lightings
Shadowless Lighting
FLV Series
Standard Models
FLV-FR Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FR114W White 3.2 270 A
FLV-FR114R Red 2.4 270 A
FLV-FR114B Blue 3.2 270 A
FLV-FR150W White 4.8 500 B
FLV-FR150R Red 2.9 500 B
FLV-FR150B Blue 4.8 500 B
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-FR114@ B FLV-FR150@
8
Lightings
Shadowless Lighting
FLV Series
Standard Models
FLV-FP Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FP130W White 6.8 320 A
FLV-FP130R Red 6 320 A
FLV-FP130B Blue 6.8 320 A
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-FP130@
9
Lightings
Shadowless Lighting
FLV Series
Standard Models
FLV-FQ Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FQ48W White 1.8 100 A
FLV-FQ48R Red 1.1 100 A
FLV-FQ48B Blue 1.8 100 A
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-FQ48@
10
Lightings
Direct Back Lighting
FLV Series
Standard Models
FLV-DB Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-DB3729W White 0.9 50 A
FLV-DB3729R Red 0.9 50 A
FLV-DB3729B Blue 0.9 50 A
FLV-DB10181W White 8 160 B
FLV-DB10181R Red 4.8 160 B
FLV-DB10181B Blue 8 160 B
FLV-DB130130W White 15.2 270 ✕ C
FLV-DB130130R Red 10.1 270 C
FLV-DB130130B Blue 15.2 270 ✕ C
FLV-DB212152W White 28.8 510 ✕ D
FLV-DB212152R Red 17.3 510 ✕ D
FLV-DB212152B Blue 28.8 510 ✕ D
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-DB3729@ B FLV-DB10181@
C FLV-DB130130@ D FLV-DB212152@
11
Lightings
Edge Type Lighting
FLV Series
Standard Models
FLV-FB Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FB5050W White 1.8 80 A
FLV-FB5050R Red 0.9 80 A
FLV-FB5050B Blue 1.8 80 A
FLV-FB7070W White 1.8 90 B
FLV-FB7070R Red 1.8 90 B
FLV-FB7070B Blue 1.8 90 B
FLV-FB9090W White 3.4 160 C
FLV-FB9090R Red 1.8 160 C
FLV-FB9090B Blue 3.4 160 C
FLV-FB130130W White 5.3 230 D
FLV-FB130130R Red 2.7 230 D
FLV-FB130130B Blue 5.3 230 D
FLV-FB200200W White 6.8 710 E
FLV-FB200200R Red 5.1 710 E
FLV-FB200200B Blue 6.8 710 E
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted. : Connectable. Light can be emitted only while the trigger is input. ✕: Not connectable
Dimensions
A FLV-FB5050@ B FLV-FB7070@
C FLV-FB9090@ D FLV-FB130130@
E FLV-FB200200@
12
Lightings
Edge Type Coaxial Lighting
FLV Series
Standard Models
FLV-FX Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-FX100W White 3.9 180 A
FLV-FX100R Red 2 180 A
FLV-FX100B Blue 3.9 180 A
FLV-FX143W White 5.3 240 B
FLV-FX143R Red 3.9 240 B
FLV-FX143B Blue 5.3 240 B
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-FX100@ B FLV-FX143@
13
Lightings
Dome Lighting
FLV Series
Standard Models
FLV-DD Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-DD70W White 2 130 A
FLV-DD70R Red 2 130 A
FLV-DD70B Blue 2 130 A
FLV-DD100W White 14.4 210 B
FLV-DD100R Red 9.6 210 B
FLV-DD100B Blue 14.4 210 B
FLV-DD150W White 14.4 490 C
FLV-DD150R Red 9.6 490 C
FLV-DD150B Blue 14.4 490 C
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-DD70@ B FLV-DD100@
C FLV-DD150@
14
Lightings
High-power Spot Lighting
FLV Series
Standard Models
FLV-EP08 Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-EP0803W White 2.3 80 ✕ A
FLV-EP0803R Red 2.3 80 ✕ A
FLV-EP0803B Blue 2.3 80 ✕ A
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-EP0803@
15
Lightings
Spot Lighting
FLV Series
Standard Models
FLV-EP50 Series
Order Information
Connectable Lighting Controller *
Electricity Weight
Model Light Color Camera-mount Lighting Controller Analog Lighting Controller Dimensions
(W) (g)
FLV-TCC Series FLV-ATC Series
FLV-EP50W White 2.3 200 ✕ A
FLV-EP50R Red 2.3 200 ✕ A
*: The table shows whether each Lighting can be connected to Lighting Controllers. When multiple Lightings are connected to a Lighting Controller,
make sure that the total electricity of all connected Lightings does not exceed the electricity of connectable lighting of each Lighting Controller.
: Connectable. Light can be continuously emitted.
: Connectable. Light can be emitted only while the trigger is input.
✕: Not connectable
Dimensions
A FLV-EP50@
P.C.D.
16
Lightings
Camera-mount Lighting Controller for FLV Series
FLV Series
Standard Models
FLV-TCC Series
Camera-mount Compact
Lighting Controller to Perform
Multistage Control with up to 4
Lightings
Product features
• Compact design helps save space in the control panel. <Standard Lighting System>
• Lighting intensity can be maintained even with long
wiring distances. Camera
Lighting
Long distances result in
voltage drops and lower
light intensities.
<FLV Series>
Camera
Shutter speed:
1/2
of previous
speed
Lighting
Power is supplied from the Camera, so light
intensity does not decrease even if the Controller and Lighting are separated.
Order Information
Applicable Lighting
Number of Connectable Power Supply Electricity of Luminance Control
Model Standard Lighting Spot Lighting
Lightings Voltage Connectable Lighting Method
FLV Series *1 FLV-EP Series
FLV-TCC1 1ch -
24 VDC *2 15W max. Digital *3
FLV-TCC4 4ch -
*1. Standard lighting is all FLV-series Lightings excluding the FLV-EP-series Spot Lightings.
*2. If the total power consumption of Lightings is 7.5 W or less, an external power supply is not required because the power is supplied from the
Camera.
*3. Luminance can be controlled by setting from the Vision Sensor Controller.
17
Lightings
FLV Series
Standard Models Camera-mount Lighting Controller for FLV Series FLV-TCC Series
Specification
Item Model FLV-TCC1 FLV-TCC4
Number of connectable lightings 1 4
Applicable Lighting FLV series (However, FLV-EP series is excluded.)
Applicable Cameras FH-S series, FZ-S series
Applicable Image Sensor Controller FH series, FZ5 series
Input Voltage Supplied from applicable camera (13 V) or external power supply (24 V)
External power supply voltage 24 VDC ± 10% (including ripple)
Recommended power supply Model S8VS-06024 (manufactured by OMRON, 24 VDC, 2.5 A, 60 W)
Connectable lighting
13 VDC for camera supply
Continuous lighting 7.5 W max. 4ch total 7.5 W max.
Trigger lighting Simultaneous lighting 7.5 W max. 4ch total 7.5 W max.
Individual lighting 7.5 W max. for 1ch
24 VDC for external supply
Continuous lighting 7.5 W max. 4ch total 7.5 W max.
Trigger lighting Simultaneous lighting No duty restriction: 7.5 W max. No duty restriction: 4ch total 7.5 W max.
Duty by 50%: 15 W max. Duty by 50%: 4ch total 15 W max.
Individual lighting No duty restriction: 7.5 W max. for 1ch
Duty by 50%: 15 W max. for 1ch
Drive method Contrast voltage method
Lighting method Trigger lighting, Continuous lighting
Luminance Control Method Duty light adjustment or voltage light adjustment
Duty light adjustment: PWM frequency of 100 kHz, light adjustment of 255 levels
Voltage light adjustment: Light adjustment of 255 levels
(all are set with image sensor controller)
Trigger lighting Lighting in synchronization with trigger input timing from the controller.
(auto setting in accordance with shutter speed)
Trigger lighting delay time Ton: 30 μs max.
Lighting duration setting Synchronized with the shutter speed of the camera (when the trigger is illuminated)
Lighting time control Set with image sensor controller, or synchronized with shutter speed
External Interface Camera connection cable (directly connected with the main unit)
Insulation Resistance 0.5 MΩ (100 VDC)
Ambient Temperature Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or condensation)
Ambient Humidity Operating and storage: 35% to 85% (with no condensation)
Degree of Protection IP20 (IEC60529)
Vibration Resistance (destructive) 10 to 150 Hz, (0.7 mm double amplitude) 80 min each in X, Y, and Z directions
Shock Resistance (destructive) 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)
Materials Case: Aluminum, Cable: PVC
Weight Approx: 120 g (including the camera mount Approx. 130 g (including the camera mount
plate) plate)
Accessories Instruction manual, Camera Mount plate, mounting screws (M2 set screw ✕ 4, M2 flat
head screw ✕ 4, M4 flat head screw ✕ 4)
18
Lightings
Camera-mount Lighting Controller for FLV Series FLV-TCC Series
FLV Series
Standard Models
Part Names and Functions
(1) Top/Bottom mount (2) Right side mount (3) Left side mount
Dimensions
●Lighting Controller
10.5 DIA.
19
Lightings
Analog Lighting Controller for FLV Series
FLV Series
Standard Models
FLV-ATC Series
Stationary Lighting Controller
Product features
• Suitable for small installation space near the Camera
• Light emission trigger can be input directly even without Omron's Vision Sensor.
Order Information
Number of Power Supply Electricity of Luminance
Applicable Lighting Model *2
Connectable Lightings Voltage Connectable Lighting Control Method
FLV-ATC21024 2ch
Standard Lighting *1 40W max.
FLV-ATC41024 4ch
100 to 240 VAC Analog
FLV-ATC10405 1ch 3W max.
For Spot Lighting
FLV-ATC40405 4ch 12W max.
*1. Standard lighting is all FLV-series Lightings excluding the FLV-EP-series Spot Lightings.
*2. The standard plug is A type. C, B, B3, SE, BF, and O types are also available. (The suffix "-C", "-B", "-B3", "-SE", "-BF", or "-O" is added to the
model name.)
20
Lightings
Analog Lighting Controller for FLV Series FLV-ATC Series
FLV Series
Standard Models
Specifications
Item Model FLV-ATC21024-@ FLV-ATC41024-@
Number of connectable lightings 1 4
Applicable lighting FLV series (However, FLV-EP series is excluded.)
Power supply voltage 100 to 240 VAC
Electricity of connectable lighting 2ch total 40 W max. 4ch total 40 W max.
30 W max. for 1ch 30 W max. for 1ch
Drive method Constant voltage method
Lighting method Trigger lighting, Continuous lighting
Luminance control method Voltage light adjustment: 14.0 to 24.0 V
Trigger lighting Lighting in synchronization with input from the trigger input terminal
Trigger lighting delay time Ton: 100 μs max.
External interface Trigger input terminal block
Dielectric strength AC 1500 V 50/60 Hz 1 min
Insulation resistance 20 MΩ (500 VDC)
Ambient temperature Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or condensation)
Ambient humidity Operating/storage: 35% to 85% (with no condensation)
Degree of protection IP20 (IEC60529)
Vibration resistance (destructive) 10 to 150 Hz, (0.2 mm double amplitude) 80 min each in X, Y, and Z directions
Shock resistance (destructive) 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)
Materials Case: Aluminum
Weight Approx. 800 g
Accessories Instruction manual, AC input cable *1
*1: The suffixed symbol of the model name means the plug shape of the accessory cable. A model name with no suffix means type A.
Trigger input terminal block Illumination mode switch button is ON (The button is pushed.)
* Current flowing through the short circuit is less than 2 mA. Short-circuiting (+) and (-) of TR1 to TR4 respectively makes the trigger
input status ON, turning the light ON.
Releasing (+) and (-) makes the status OFF, turning the light OFF.
[Important]
• Make sure that excessive force is not imposed on the wire and terminal block.
• Do not install the product in which loads are constantly applied to the terminal block such as the wire being under tension.
• When wiring the terminal block, use an applicable cable (AWG 14 to 24, tip processing length: 7 mm).
21
Lightings
FLV Series
Standard Models Analog Lighting Controller for FLV Series FLV-ATC Series
Specifications
ItemModel FLV-ATC10405-@ FLV-ATC40405-@
Number of connectable lightings 1 4
Applicable lighting FLV-EP series
Power supply voltage 100 to 240 VAC
Electricity of connectable lighting 3 W max. 4ch total 12 W max.
3 W max. for 1ch
Drive method Constant current method
Lighting method Trigger lighting, Continuous lighting
Luminance control method Current light adjustment ~0.4 A
Trigger lighting Turning the light off in synchronization with input from the trigger input terminal
Trigger lighting delay time Ton: 100 μs max.
External interface Trigger input terminal block
Dielectric strength AC 1500 V 50/60 Hz 1 min
Insulation resistance 20 MΩ (500 VDC)
Ambient temperature Operating: 0 to +50°C, Storage: -15 to +60°C (with no icing or condensation)
Ambient humidity Operating/storage: 35% to 85% (with no condensation)
Degree of protection IP20 (IEC60529)
Vibration resistance (destructive) 10 to 150 Hz, (0.2 mm double amplitude) 80 min each in X, Y, and Z directions
Shock resistance (destructive) 150 m/s2 3 times each in 6 directions (up/down, left/right, forward/backward)
Materials Case: Aluminum
Weight Approx. 800 g
Accessories Instruction manual, AC input cable *1
*1: The suffixed symbol of the model name means the plug shape of the accessory cable. A model name with no suffix means type A.
22
Lightings
Analog Lighting Controller for FLV Series FLV-ATC Series
FLV Series
Standard Models
Connections with external trigger input terminal block
• Connection of this terminal block is not required if external lighting issuance trigger is not used.
Trigger input terminal block CH1 Trigger input terminal block CH1 to
CH4
Short-circuiting (+) and (-) of TR1 to TR4 respectively makes the trigger
Trigger input terminal block input status OFF, turning the light OFF.
* Current flowing through the short circuit is less than 1 mA. Releasing (+) and (-) makes the status ON, turning the light ON.
[Important]
• Make sure that excessive force is not imposed on the wire and terminal block.
• Do not install the product in which loads are constantly applied to the terminal block such as the wire being under tension.
• When wiring the terminal block, use an applicable cable (AWG 14 to 24, tip processing length: 7 mm).
23
Bar Lighting
FL-BR Series
The highest level of brightness in the industry.
These Bar Lighting are structured for adaptable wiring and mounting.
Lightings
FL Series
High-brightness Models
0.8 0.8
0.7 0.7
0.6 0.6
0.5 0.5
0.4 0.4
0.3 0.3
0.2 0.2
0.1 0.1
0.0 0.0
−100 −80 −60 −40 −20 0 20 40 60 80 100 −100 −80 −60 −40 −20 0 20 40 100
(mm) (mm)
Application
Standard Lighitng FL Series
It is difficult to read characters with low Sharp images are created of both
contrast. two-dimensional codes and characters.
Order Information
Standard Models Model Light color
Wide Area Model FL-BR5020W
High-brightness Models FL-BR5020W-H
Wide Area Model FL-BR9120W
White LEDs
High-brightness Models FL-BR9120W-H
Wide Area Model FL-BR13120W
High-brightness Models FL-BR13120W-H
24
Bar Lighting FL-BR Series
FL Series
High-brightness Models
Ambient humidity Operation or storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gases.
Degree of protection IEC60259 IP20
Weight Approx. 40g Approx. 70g Approx. 100g
Materials Light: Case: Aluminum; Cover, side parts, and lens: Heat resistant polyvinyl chloride; Connector: Thermoplastic resin with glass
LED Class Class2 (JIS C 6802:2005)
Accessories Instruction manual
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
Groove to insert
mounting nuts 11.3 49.8 20
8.6 Two, M3 with a depth of 5 mm max.
12.5
20
5.4
5.4
9 9
Two, M3 with a depth of 5 mm max.
4 dia. (Conductor sectional area: 0.05 mm2/
Insulator diameter: 0.38)
2-3.2dia
Cable minimum bending radius: 24
9±0.1
Mounting Hole Dimensions
20
9
5.4
5.4
9 9
Two, M3 with a depth of 5 mm max.
4 dia. (Conductor sectional area: 0.05 mm2/
Insulator diameter: 0.38)
2-3.2dia
Cable minimum bending radius: 24
9±0.1
5.4
9±0.1
25
Direct Ring Lighting
FL-DR Series
Clear Images WITH Industry’s Top Level of Brightness and
a Illumination over a Wide Field of View
Lightings
FL Series
High-brightness Models
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
− 150 − 100 − 50 0 50 100 150 (mm)
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
− 150 − 100 − 50 0 50 100 150 (mm)
Application
Standard Lighitng FL series
Order Information
Standard Models Model Light color
Wide Area Model FL-DR32W
High-brightness Models FL-DR32W-H
Wide Area Model FL-DR50W
White LEDs
High-brightness Models FL-DR50W-H
Wide Area Model FL-DR90W
High-brightness Models FL-DR90W-H
26
Direct Ring Lighting FL-DR Series
FL Series
High-brightness Models
Ambient humidity Operation or storage: 35% to 85% (with no condensation)
Ambient atmosphere No corrosive gases.
Degree of protection IEC60259 IP20
Weight Approx. 25g Approx. 30g Approx. 70g Approx. 80g
Materials Light: Case: Aluminum; Cover, side parts, and lens: Heat resistant polyvinyl chloride; Connector: Thermoplastic resin with glass
LED Class Class2 (JIS C 6802:2005)
Accessories Instruction manual
The color of white LEDs can vary due to intrinsic characteristics.
Confirm suitability for the application in advance.
10 dia
11.3 32 dia 20±0.1
(300)
8.6
20±0.1
16
12.5
9
40±0.1
28 dia
50 dia
11.3 (300)
8.6
40±0.1
12.5
16
9
FL-DR90W(-H)
Four, M2 with a depth of 4 mm max.
10.9
70±0.1
50 dia
11.3 (300) 90 dia
70±0.1
8.6
4-3.4 dia. ± 0.1
20
12.5
9
27
Stationary Lighting Controller
FL-STC Series
The smallest body in the industry is combined
with the industry’s longest cable at 25 m.
Lightings Install in essentially any location.
FL Series
High-brightness Models
Product features
●Easy Control and Adjustment of the Lighting
With a compact design small enough to fit in the palm of your hand, the Controller can be built into the control panel or in the gap between produc-
tion lines.
By using the longest lighting cable in the industry (25 m), the Controller can be installed along with the image processing monitor in a variety of
locations. It is possible to adjust the lighting while looking at the screen.
28
Stationary Lighting Controller FL-STC Series
Order Information
Standard Models Model I/O specifications Input voltage
FL-STC10 NPN
One-channel models
FL-STC15 PNP
24 VDC
FL-STC20 NPN
Two-channel models
FL-STC25 PNP
Lightings
Ratings and Specifications
FL Series
High-brightness Models
Product name One-channel models Two-channel models
I/O type NPN PNP NPN PNP
Model FL-STC10 FL-STC15 FL-STC20 FL-STC25
Power supply voltage 24 VDC±10% (including ripple)
Power consumption 36 W, 1.5 A max. (including the lighting section) 72 W, 3 A max. (including the lighting section)
Number of output channels 1 2
Applicable lights FL-@ Series *1
Light control Continuous light While the Strobe Controller power source is ON, light is continuously emitted.
modes emission mode PWM frequency: 100 kHz, Light adjustment: 400 levels
Light emission is synchronized with an external trigger input.
Triggered light
Light emission: Continuous while the trigger is input, or 0.1 to 99.9 ms (set in 0.1-ms increments)
emission mode
PWM frequency: 100 kHz, Light adjustment: 400 levels
Light emission is synchronized with the external trigger input, but twice the amount of light is emitted in
Strobe light
comparison with the trigger light emission mode.
emission mode
Light emission pulse width: 0.01 to 5 ms (light adjustment: 500 levels equivalent)
Light adjustment Operation on the
Light adjustment mode settings and light adjustment value input: slide switch and directional pad
setting light
Remote operation Light adjustment value input: 9-bit binary input
External interface Parallel I/O connector (D-sub 15-pin), Terminal block (external trigger input with 2 terminals, power
source voltage input with 2 terminals)
Ambient temperature Operation: 0 to 40°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity Operation or storage: 35% to 85% (with no condensation)
Vibration resistance 10 to 150 Hz (Double amplitude: 0.7mm), 80 min each in X, Y, and Z directions
Shock resistance 150 m/s2 3 times each in 6 direction (up-down, left-right, front-back)
Materials Case: PC
Degree of protection IEC60529 IP20
Weight Approx. 100 g
Accessories Instruction manual,Terminal block Connector
(*1) Ask your OMRON representative for details on applicable models.
89
(89.9)
(89.9)
98
80
80
98
22 22
(22.5) Power supply connector Mounting Hole Dimensions Power supply connector
(22.5) Mounting Hole Dimensions
29
Stationary Lighting Controller FL-STC Series
DC24V DC24V
Load Load
DI1 D1 DI1 D1
DI2 D2 DI2 D2
Internal circuits
Internal circuits
DI3 D3 DI3 D3
DI4 D4 DI4 D4
DI5 D5 DI5 D5
DI6 D6 DI6 D6
DI7 D7 DI7 D7
DI8 D8 DI8 D8
DI9 D9 DI9 D9
DI10 CLR DI10 CLR
DI11 SEL DI11 SEL
DI12 SAVE DI12 SAVE
DI13 TRIG1 DI13 TRIG1
DI14 TRIG2 DI14 TRIG2
Wiring diagram
Pin Arrangement
Pin No. Signal Signal direction Function
PARALLEL Bit 1 of light control data (1)CONT/TRIG Mode
DI1 D1 Input
(least significant bit) Light control data is specified using 9 bits of binary
DI2 D2 Input Bit 2 of light control data data from D1 to D9.
DI11 DI12 DI13 DI14 DO1 The specifiable range is the 400 levels from 1 to
DI6 DI7 DI8 DI9 DI10
DI1 DI2 DI3 DI4 DI5 DI3 D3 Input Bit 3 of light control data 400 (binary 000000001 to 110010000).
DI4 D4 Input Bit 4 of light control data (2)STB Mode
DI5 D5 Input Bit 5 of light control data Strobe light emission data is specified in 9 bits of
binary data from D1 to D9 The specifiable range is
DI6 D6 Input Bit 6 of light control data the 500 values from 0.01 to 5.00 ms (binary
DI7 D7 Input Bit 7 of light control data 000000001 to 111110100).
DI8 D8 Input Bit 8 of light control data Each bit is 1 for ON and 0 for OFF (open).
Bit 9 of light control data
DI9 D9 Input
(most significant bit)
Error reset input. Errors are reset when the error reset input changes from OFF
DI10 CLR Input
(open) to ON.
Lighting control channel selection input.
DI11 SEL Input
OFF (open) specifies channel 1, ON specifies channel 2.
The light control data (D1 to D9) is saved in the built-in memory when the input
DI12 SAVE Input
changes from OFF (open) to ON.
DI13 TRIG1 Input Inputs the light emission trigger signal for channel 1.
DI14 TRIG2 Input Inputs the light emission trigger signal for channel 2. (*)
DO1 ERR output Turns ON when an error occurs.
* An input with the same function as the lighting emission trigger input is also available on the terminal block (pins 1 and 2). When using the trigger
input, connect the input line only to the parallel connector or only to the terminal block.It is not possible to use both input lines at the same time.
30
Camera-mount Lighting Controller for FL Series
FL-TCC Series
Camera-mount Compact
Lighting Controller Which Requires
No Power Supply Nor Lighting Control
Lightings
FL Series
High-brightness Models
Product features
• No separate power supply is required because the power is
Camera for Vision Sensor
supplied from the Camera.
• Light is emitted when a trigger signal is received from the LED Lighting
Camera.
• Simple connection between the Camera and the Lighting with
a single cable
Lighting Controller
Order Information
Item Model Weight
Lighting Controller FL-TCC1 Approx. 110 g
Camera Mounting Spacer FL-TCC1-XSP Approx. 10 g
Camera Mounting Attachment FL-TCC1-XAT Approx. 20 g
31
Camera-mount Lighting Controller for FL Series FL-TCC Series
6
10
(Ø11)
12
28
(12.6)
6
(21) 167
Lightings 2-4Dia.6CORES(CONDUCTOR CROSS SECTIONAL AREA:0.05mm
INSULATION OUTSIDE DIAMETER:0.38 Dia.)
FL Series
High-brightness Models
(1)
(11.3)
(14.5)
8.5
14.5
2-C2
8.8
72.5 (35.7)
(28)
26
12
MOUNTING SCREW HOLES
●Optional Products
Camera Mounting Spacer Camera Mounting Attachment
FL-TCC1-XSP (sold separately) FL-TCC1-XAT (sold separately)
(MOUNTING HOLES
(MOUNTING HOLES FOR CAMERA) FOR CONTROLLER)
2-4.5Dia. 33 8 4-M2 TAPPING
25.6 8
(MOUNTING HOLES) 8-2.5Dia. 25 5 12
12
22.7
22
30.2
22
35.2
29
38
29
4-C2
4-
(MOUNTING HOLES FOR CAMERA) 16.8
R
1
2-4.5Ellipse
32
Lighting Options
●Parallel Cable
Model Cable Length Weight
FL-XCP2 2m Approx. 180 g
Options
Dimensions (Unit: mm)
●Extension Cable ●Parallel Cable
5 44.9 L (See note 1.)
11.3 L (See note 1.) 5 21
19 Vinyl-insulated round cable, 6 dia., 15 conductors
Vinyl-insulated round cable, 5 dia. (See note 2.)
8.6 10
10.9
32.2
11
12.5
11.3
9.1
9
22
Nameplate
Nameplate 15 50
50
Note 1. Depends on the cable length. Note 1. Depends on the cable length.
Note 2. The cable diameter is 6.2 for robot cables.
33
Options Cable/Diffusion Plates/Mounting Brackets
Model L
FLV-XC1 1000
FLV-XC2 2000
FLV-XC3 3000
FLV-XC5 5000
B FLV-XC@EP
Model L
FLV-XC1EP 1000
FLV-XC2EP 2000
FLV-XC3EP 3000
Options
FLV-XC5EP 5000
C FLV-XC@S2
8
33 L1 ±50 29 L2 ±50 27
20 10
26 20
BRANCH COUPLER 10 5.9
13
10.5
8
11.5
5.5
10
5
10
5
8
10 2PIN
11.5
5.5
10
Model L1 L2
FLV-XC1S2 500 500
FLV-XC2S2 1000 1000
FLV-XC3S2 1000 2000
FLV-XC5S2 2000 3000
34
Options Cable/Diffusion Plates/Mounting Brackets
●Polarization Plates
Standard Models Model Outer diameter/Inner diameter/Thickness (mm) Weight
FL-DR32PL 32/10/2 Approx. 3 g
Direct Ring Lighting FL-DR50PL 50/28/2 Approx. 5 g
FL-DR90PL 90/50/2 Approx. 15 g
Options
For FLV series
Order Information
●Diffusion Plates
Standard Models Model Connectable Lighting
FLV-DR12030DF Direct Ring Lighting FLV-DR12030@
FLV-DR9215DF Direct Ring Lighting FLV-DR9215@
FLV-DR9030DF Direct Ring Lighting FLV-DR9030@
FLV-DR9000DF Direct Ring Lighting FLV-DR9000@
Direct Ring Lighting FLV-DR7000DF Direct Ring Lighting FLV-DR7000@
FLV-DR7030DF Direct Ring Lighting FLV-DR7030@
FLV-DR6615DF Direct Ring Lighting FLV-DR6615@
FLV-DR5030DF Direct Ring Lighting FLV-DR5030@
FLV-DR3220DF Direct Ring Lighting FLV-DR3220@
●Diffusion Plates
Standard Models Model Connectable Lighting
FLV-BR48031DF Bar Lighting FLV-BR48031@
FLV-BR38037DF Bar Lighting FLV-BR38037@
FLV-BR21230DF Bar Lighting FLV-BR21230@
FLV-BR21222DF Bar Lighting FLV-BR21222@
Bar Lighting FLV-BR15020DF Bar Lighting FLV-BR15020@
FLV-BR14030DF Bar Lighting FLV-BR14030@
FLV-BR11222DF Bar Lighting FLV-BR11222@
FLV-BR8532DF Bar Lighting FLV-BR8532@
FLV-BR6022DF Bar Lighting FLV-BR6022@
●Diffusion Plates
Standard Models Model Connectable Lighting
FLV-DL15060DF Low Angle Ring Lighting FLV-DL15060@
Low Angle Ring FLV-DL12060DF Low Angle Ring Lighting FLV-DL12060@
Lighting FLV-DL7260DF Low Angle Ring Lighting FLV-DL7260@
FLV-DL5890DF Low Angle Ring Lighting FLV-DL5890@
35
Options Cable/Diffusion Plates/Mounting Brackets
Mounting Brackets
For FL series
Order Information Dimensions (Unit: mm)
Standard Models Model
Bar Lighting FL-XBK1
Two, 3.4 dia. throughholes
12.9±0.1 dia.
(groove center) Burr side
3.2 + 0.20 (groove width) Radius:
1.5 max.
direction
Rolling
Burrs must extend less than 0.1 mm.
Options
36
Standard Lens
SV-V Series
• Standard CCTV lens.
• Lineup of 9 models with focal lengths ranging from 6 to 100 mm.
• Locking set screws for focus and iris.
• More robust structure designed for machine vision.
• Lower distortion and higher resolution than previous CCTV
lenses.
Order Information
Closest Total Maximum
Focal distance Focus Field of view Weight
Series Model Dimension distance Filter size length compatible
(mm) (F No) (V ✕ H) (g)
(mm) (mm) CCD
3Z4S-LE SV-0614V A 6 1.4 42.3° ✕ 54.6° 200 M27.0 P0.5 49 30 1/3 inch
C-mount 3Z4S-LE SV-0813V B 8 1.3 44.6° ✕ 57.3° 200 M25.5 P0.5 55 34 1/3 inch
Lens for 3Z4S-LE SV-1214V C 12 1.4 21.9° ✕ 38.9° 300 M27.0 P0.5 44 29.5 1/3 inch
1/3-inch
image 3Z4S-LE SV-1614V D 16 1.4 22.8° ✕ 30.1° 400 M27.0 P0.5 34 24.5 1/3 inch
sensor 3Z4S-LE SV-2514V E 25 1.4 14.9° ✕ 19.8° 500 M27.0 P0.5 36 24 1/3 inch
(Recommend: 3Z4S-LE SV-3518V F 35 1.8 10.8° ✕ 14.4° 300 M27.0 P0.5 47 33.5 1/3 inch
FZ-S@/
FZ-SH@/ 3Z4S-LE SV-5018V G 50 1.8 7.9° ✕ 10.5° 300 M30.5 P0.5 67 37 1/3 inch
FH-S@) 3Z4S-LE SV-7527V H 75 2.7 4.9° ✕ 6.6° 1200 M30.5 P0.5 76 42 1/3 inch
3Z4S-LE SV-10035V I 100 3.5 4.0° ✕ 5.3° 2000 M30.5 P0.5 79 43.9 1/3 inch
Dimensions
A (SV-0614V) 30 17.526 B (SV-0813V) 34 17.526 C (SV-1214V) 29.5 17.526 D (SV-1614V) 24 17.526
4 4 4 4
3.4 0.3 1.5
2.8
M27 P=0.5
29.5 dia.
29 dia.
M25.5 P=0.5
M27 P=0.5
M27 P=0.5
29.5 dia.
29.5 dia.
29.5 dia.
28 dia.
29 dia.
29 dia.
Lenses
1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount)
E (SV-2514V) 24.5 17.526 F (SV-3518V) 33.5 (WD:∞) G (SV-5018V) 37.0 (WD:∞) H (SV-7527V) 42 (WD:∞)
- 37.5 (WD:300mm) 17.526 - 39.4 (WD:1000mm) 17.526 - 44.4 (WD:1000mm) 17.526
4
1.7 4 4 4 2.6
M30.5 P=0.5
M30.5 P=0.5
M27 P=0.5
M27 P=0.5
29.5 dia.
32 dia.
29 dia.
29 dia.
29 dia.
32 dia.
32 dia.
31 dia.
1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount)
43.9 (WD:∞)
I (SV-10035V) - 46.3 (WD:1000mm) 17.526
4
2.1
M30.5 P=0.5
31 dia.
32 dia.
37
High-resolution, Low-distortion Lens
SV-H/VS-H1 Series
• High-resolution lens for megapixel camera.
• Lineup of 9 models for 2/3-inch cameras,
with focal lengths ranging from 6 to 100 mm,
and 5 models for 1-inch Cameras.
• Locking set screws for focus and iris.
• Bright F number of 1.4 for high-speed
CMOS camera.
• Compact design but minimized decrease in
distortion and brightness. for 2/3-inch image sensor SV-H series for 1-inch image sensor VS-H1 series
Order Information
Focal Closest Maximum
Focus Field of view Weight Total length
Series Model Dimension distance distance Filter size compatible
(F No) (V ✕ H) (g) (mm)
(mm) (mm) CCD
3Z4S-LE SV-0614H A 6 1.4 56.8° ✕ 71.5° 100 M40.5 P0.5 145 57.5 2/3 inch
3Z4S-LE SV-0814H B 8 1.4 44.9° ✕ 57.6° 100 M35.5 P0.5 125 52.5 2/3 inch
C-mount 3Z4S-LE SV-1214H C 12 1.4 30.2° ✕ 39.6° 100 M27 P0.5 85 51 2/3 inch
Lens for
2/3-inch 3Z4S-LE SV-1614H D 16 1.4 23.1° ✕ 30.6° 100 M27 P0.5 85 47.5 2/3 inch
image 3Z4S-LE SV-2514H E 25 1.4 15.0° ✕ 20.0° 150 M27 P0.5 65 36 2/3 inch
sensor 3Z4S-LE SV-3514H F 35 1.4 10.8° ✕ 14.3° 200 M35.5 P0.5 150 45.5 2/3 inch
(Recommend:
FZ-S@2M/ 3Z4S-LE SV-5014H G 50 1.4 7.5° ✕ 10.0° 300 M40.5 P0.5 170 57.7 2/3 inch
FZ-S@5M/ 2/3"= 5.0° ✕ 6.7°
3Z4S-LE SV-7525H H 75 2.5 1200 M34.0 P0.5 85 49.5 1 inch
FH-S@02) 1"= 7.3° ✕ 9.7°
2/3"= 3.9° ✕ 5.1°
3Z4S-LE SV-10028H I 100 2.8 2000 M37.5 P0.5 105 66.5 1 inch
1"= 5.6° ✕ 7.5°
C-mount 3Z4S-LE VS-1214H1 J 12 1.4 44.0° ✕ 56.9° 300 M35.5 P0.5 140 48 1 inch
Lens for 3Z4S-LE VS-1614H1 K 16 1.4 33.7° ✕ 44.3° 300 M30.5 P0.5 110 42.5 1 inch
1-inch image
3Z4S-LE VS-2514H1 L 25 1.4 21.5° ✕ 28.5° 300 M30.5 P0.5 90 33.5 1 inch
sensor
(Recommend: 3Z4S-LE VS-3514H1 M 35 1.4 15.6° ✕ 20.7° 300 M30.5 P0.5 100 35 1 inch
Lenses
FH-S@04) 3Z4S-LE VS-5018H1 N 50 1.8 11.0° ✕ 14.6° 500 M40.5 P0.5 135 44.5 1 inch
Dimensions
A (SV-0614H) 17.526 B (SV-0814H) 52.5 17.526 C (SV-1214H) 51 17.526 D (SV-1614H) 47.5 17.526
57.5
4 4 4 4
4 4.3
3.6 2.5
M40.5 P=0.5
M35.5 P=0.5
M27 P=0.5
M27 P=0.5
38 dia.
28.5 dia.
28.5 dia.
42 dia.
30 dia.
37 dia.
38 dia.
39 dia.
30 dia.
1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount) 1-32 UNF (C -mount)
M40.5 P=0.5
28.5 dia.
M35.5 P=0.5
M34 P=0.5
30 dia.
44 dia.
37 dia.
44 dia.
42 dia.
36 dia.
37.5 dia.
21.5 dia.
21.5 dia.
33 dia.
23 dia.
38 dia.
38 dia.
39 dia.
33 dia.
38 dia.
23 dia.
38 dia.
23 dia.
38 dia.
44 dia.
38
Vibrations and shocks resistant C-mount Lens
VS-MC Series
• Lineup of 7 models with focal lengths ranging from 15 to
75 mm.
• A fixation ring is used to fasten to the surface.
• Internal structure of the lens is designed to strengthen
against vibration to achieve higher resistance to vibration
than previous lenses, which allows the lens to be moved
or to be used in a place subject to vibration.
• Install in narrow space without a locking set screw.
Order Information
Focal Maximum Total Depth of Maximum
Focus WD
Series Model Dimension distance outer diameter: length Filter size field compatible
(F No.) (mm)
(mm) (mm) (mm) (mm) CCD
492.2 183.1
Maximum
3Z4S-LE VS-MC15 31 dia. 29.5 M27.0 P0.5 67.3 4.8
aperture
42.3 2.3
492.2 512.7
3Z4S-LE VS-MC15-FNO56 A 15 5.6 31 dia. 29.5 M27.0 P0.5 67.3 13.4 2/3 inch
42.3 6.5
492.2 732.4
3Z4S-LE VS-MC15-FNO80 8 31 dia. 29.5 M27.0 P0.5 67.3 13.4
42.3 9.2
516.5 110.8
Maximum
3Z4S-LE VS-MC20 31 dia. 30.5 M27.0 P0.5 81.0 3.4
aperture
49.8 1.5
516.5 291.2
3Z4S-LE VS-MC20-FNO56 B 20 5.6 31 dia. 30.5 M27.0 P0.5 81.0 9.0 2/3 inch
49.8 3.9
516.5 416.0
3Z4S-LE VS-MC20-FNO80 8 31dia. 30.5 M27.0 P0.5 81.0 12.8
49.8 5.6
Lenses
Vibrations
and shocks 513.9 67.2
Maximum
resistant 3Z4S-LE VS-MC25N 31dia. 38.0 M27.0 P0.5 106.0 3.2
aperture
C-mount Lens 54.9 1.0
for 2/3-inch 513.9 188.2
image sensor
3Z4S-LE VS-MC25N-FNO56 C 25 5.6 31dia. 38.0 M27.0 P0.5 106.0 9.0 2/3 inch
(Recommend:
FZ-S@/FZ- 54.9 2.7
S@2M/FZ- 513.9 268.8
S@5M2/FZ- 3Z4S-LE VS-MC25N-FNO80 8 31dia. 38.0 M27.0 P0.5 106.0 12.8
SH@/FH-S@/ 54.9 3.8
FH-S@02) 514.6 47.1
Maximum
3Z4S-LE VS-MC30 31dia. 35.7 M27.0 P0.5 214.5 8.2
aperture
81.1 11.0
514.6 131.9
3Z4S-LE VS-MC30-FNO56 D 30 5.6 31dia. 35.7 M27.0 P0.5 214.5 22.9 2/3 inch
81.1 3.2
514.6 188.4
3Z4S-LE VS-MC30-FNO80 8 31dia. 35.7 M27.0 P0.5 214.5 32.7
81.1 4.6
213.0 2.8
Maximum
3Z4S-LE VS-MC35 31dia. 45.7 M27.0 P0.5 196.4 2.2
aperture
145.9 0.6
213.0 8.4
3Z4S-LE VS-MC35-FNO56 E 35 5.6 31dia. 45.7 M27.0 P0.5 196.4 6.5 2/3 inch
145.9 1.7
213.0 11.9
3Z4S-LE VS-MC35-FNO80 8 31dia. 45.7 M27.0 P0.5 196.4 9.2
145.9 2.5
39
Vibrations and shocks resistant C-mount Lens VS-MC Series
Dimensions
A (VS-MC15) B (VS-MC20) C (VS-MC25N) D (VS-MC30)
25.4 - 29.5 17.526
CCD IMAGING 23.0 - 30.5 17.526 CCD IMAGING 26.5 - 38.0 17.526 CCD IMAGING 24.0 - 35.7 17.526 CCD IMAGING
4 SURFACE SURFACE SURFACE SURFACE
1.1 4 4 4
30 dia.
30 dia.
31 dia.
30 dia.
31 dia.
30 dia.
31 dia.
1
17 dia.
31 dia.
1
1
1
SLOT 1 1-32 UNF (C-mount) SLOT 1 1-32 UNF (C-mount) SLOT 1 1-32 UNF (C-mount) SLOT 1 1-32 UNF (C-mount)
31 dia.
30 dia.
31 dia.
30 dia.
23 dia.
31 dia.
1
CCD IMAGING
1 1-32 UNF (C-mount) SURFACE
1 1-32 UNF (C-mount) 1 1-32 UNF (C-mount)
Lenses
40
Lens for small camera of Vision Sensor FZ series
FZ-LES Series
• Lenses for small cameras: 12 x 12 mm pen-shaped
camera and 17 mm thick flat camera.
Order Information
Model Focal length Brightness
FZ-LES3 3mm F2.0
FZ-LES6 6mm F2.0
FZ-LES16 16mm F3.4
FZ-LES30 30mm F3.4
Dimensions
FZ-LES3 FZ-LES6
4
12
12
Lenses
FZ-LES16 FZ-LES30
4
12
12
41
Non-telecentric Macro Lens
VS-MC Series
• Lineup of 4 models with magnifications ranging from 1.0 to 0.1 and WD ranging
from 325.5 to 82.4 mm.
• 16-mm-dia. simple mechanism with high resistance to vibration.
Order Information
Dimension
Field of vision *1 O/I WD Depth of Resolution
Model Dimension Magnification Effective TV distortion
(V ✕ H) mm (mm) (mm) field *2 *3
FNO
3Z4S-LE VS-MC01-330 A 0.1 66.0 ✕ 88.0 4.43 364.5 325.5 35.4mm 30.5μm 0.01% max.
3Z4S-LE VS-MC03-180 B 0.3 22.0 ✕ 29.3 5.29 248.5 184.8 4.7mm 11.6μm 0.00% max.
3Z4S-LE VS-MC05-130 C 0.5 13.2 ✕ 17.6 6.10 198.8 126.3 2.0mm 8.2μm 0.00% max.
3Z4S-LE VS-MC1-80 D 1.0 6.6 ✕ 8.8 8.14 176.8 82.4 0.7mm 5.5μm 0.00% max.
*1 Calculated using the size of an image element (2/3 inch = 6.6 ✕ 8.8 mm).
*2 Calculated using a permissible circle of confusion diameter of 0.04 mm.
*3 Calculated using a wavelength of 550 nm.
Dimensions
A (VS-MC01-330) B (VS-MC03-180)
325.5±16 (WD) 21.5 17.526 184.8±9 (WD) 46.2 17.526
2 4 2 4
30 dia.
30 dia.
16
16
Lenses
C (VS-MC05-130) D (VS-MC1-80)
30 dia.
16
16
42
Lens Option
Order Information
Polarizing Filter
Model
3Z4S-LE SV-PL255
3Z4S-LE SV-PL270
3Z4S-LE SV-PL305
Extension Tubes
Model Length (mm)
3Z4S-LE SV-EXR 7-piece set (40, 20, 10, 5, 2.0, 1.0, 0.5 mm)
* These Extension Tubes are also available individually. Order using the following model
number, replacing the box with the desired length: 3Z4S-LE SV-EXR@. (0.5, 1, 2, 5, 10,
15, 20, 25, 30, 40, 50 mm)
Lenses
Model ●Configuration
3Z4S-LE SV-1.5X *1
3Z4S-LE SV-2.0X *2
*1 In the following lenses, it is necessary to
use it together with the extension tubes of
5mm or more.
SV-0614H, SV-0814H, SV-1214H, SV- Lens Rear converter Lens CCD Camera
2514H, SV-0614V, SV-0813V
*2 In the following lenses, it is necessary to
use it together with the extension tubes of
5mm or more.
SV-0614H, SV-0814H, SV-1214H, SV-
2514H, SV-0813V
43
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
part of all quotes, agreements, purchase orders, acknowledgments, price lists, BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
catalogs, manuals, brochures and other documents, whether electronic or in PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
writing, relating to the sale of products or services (collectively, the "Products") INTENDED USE. Omron further disclaims all warranties and responsibility of
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron any type for claims or expenses based on infringement by the Products or oth-
objects to any terms or conditions proposed in Buyer’s purchase order or other erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
documents which are inconsistent with, or in addition to, these Terms. gation hereunder shall be, at Omron’s election, to (i) replace (in the form
2. Prices; Payment Terms. All prices stated are current, subject to change with- originally shipped with Buyer responsible for labor charges for removal or
out notice by Omron. Omron reserves the right to increase or decrease prices replacement thereof) the non-complying Product, (ii) repair the non-complying
on any unshipped portions of outstanding orders. Payments for Products are Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
due net 30 days unless otherwise stated in the invoice. the non-complying Product; provided that in no event shall Omron be responsi-
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices ble for warranty, repair, indemnity or any other claims or expenses regarding
sent to Buyer after deducting transportation charges, taxes and duties, and will the Products unless Omron’s analysis confirms that the Products were prop-
be allowed only if (i) the invoice is paid according to Omron’s payment terms erly handled, stored, installed and maintained and not subject to contamina-
and (ii) Buyer has no past due amounts. tion, abuse, misuse or inappropriate modification. Return of any Products by
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or Buyer must be approved in writing by Omron before shipment. Omron Compa-
the maximum legal rate, whichever is less, on any balance not paid within the nies shall not be liable for the suitability or unsuitability or the results from the
stated terms. use of Products in combination with any electrical or electronic components,
5. Orders. Omron will accept no order less than $200 net billing. circuits, system assemblies or any other materials or substances or environ-
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all ments. Any advice, recommendations or information given orally or in writing,
costs involved in, obtaining any government approvals required for the impor- are not to be construed as an amendment or addition to the above warranty.
tation or sale of the Products. See http://www.omron247.com or contact your Omron representative for pub-
7. Taxes. All taxes, duties and other governmental charges (other than general lished information.
real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
imposed directly or indirectly on Omron or required to be collected directly or FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
indirectly by Omron for the manufacture, production, sale, delivery, importa- LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
tion, consumption or use of the Products sold hereunder (including customs WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
duties and sales, excise, use, turnover and license taxes) shall be charged to BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
and remitted by Buyer to Omron. Further, in no event shall liability of Omron Companies exceed the individual
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory price of the Product on which liability is asserted.
to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
security or payment in advance. If Buyer fails to make payment or otherwise their employees from and against all liabilities, losses, claims, costs and
comply with these Terms or any related agreement, Omron may (without liabil- expenses (including attorney's fees and expenses) related to any claim, inves-
ity and in addition to other remedies) cancel any unshipped portion of Prod- tigation, litigation or proceeding (whether or not Omron is a party) which arises
ucts sold hereunder and stop any Products in transit until Buyer pays all or is alleged to arise from Buyer's acts or omissions under these Terms or in
amounts, including amounts payable hereunder, whether or not then due, any way with respect to the Products. Without limiting the foregoing, Buyer (at
which are owing to it by Buyer. Buyer shall in any event remain liable for all its own expense) shall indemnify and hold harmless Omron and defend or set-
unpaid accounts. tle any action brought against such Companies to the extent based on a claim
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation that any Product made to Buyer specifications infringed intellectual property
unless Buyer indemnifies Omron against all related costs or expenses. rights of another party.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery 16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
resulting from causes beyond its control, including earthquakes, fires, floods, sive property of Omron Companies and Buyer shall not attempt to duplicate it
strikes or other labor disputes, shortage of labor or materials, accidents to in any way without the written permission of Omron. Notwithstanding any
machinery, acts of sabotage, riots, delay in or lack of transportation or the charges to Buyer for engineering or tooling, all engineering and tooling shall
requirements of any government authority. remain the exclusive property of Omron. All information and materials supplied
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: by Omron to Buyer relating to the Products are confidential and proprietary,
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship and Buyer shall limit distribution thereof to its trusted employees and strictly
except in “break down” situations. prevent disclosure to any third party.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and
constitute delivery to Buyer; licenses regarding (i) export of products or information; (iii) sale of products to
c. All sales and shipments of Products shall be FOB shipping point (unless oth- “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
erwise stated in writing by Omron), at which point title and risk of loss shall regulated technology or information.
pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
est in the Products until the full purchase price is paid; and no course of dealing between Buyer and Omron shall operate as a waiver
d. Delivery and shipping dates are estimates only; and of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
e. Omron will package Products as it deems proper for protection against nor- without Omron's written consent. (c) Law. These Terms are governed by the
mal handling and extra charges apply to special conditions. law of the jurisdiction of the home office of the Omron company from which
12. Claims. Any claim by Buyer against Omron for shortage or damage to the Buyer is purchasing the Products (without regard to conflict of law princi-
Products occurring before delivery to the carrier must be presented in writing ples). (d) Amendment. These Terms constitute the entire agreement between
to Omron within 30 days of receipt of shipment and include the original trans- Buyer and Omron relating to the Products, and no provision may be changed
portation bill signed by the carrier noting that the carrier received the Products or waived unless in writing signed by the parties. (e) Severability. If any provi-
from Omron in the condition claimed. sion hereof is rendered ineffective or invalid, such provision shall not invalidate
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
Products will be free from defects in materials and workmanship for a period of against the amount owing in respect of this invoice. (g) Definitions. As used
twelve months from the date of sale by Omron (or such other period expressed herein, “including” means “including without limitation”; and “Omron Compa-
in writing by Omron). Omron disclaims all other warranties, express or implied. nies” (or similar words) mean Omron Corporation and any direct or indirect
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, subsidiary or affiliate thereof.
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES
Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com 54.11.4783.5300
OMRON EUROpE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • Tel: +31 (0) 23 568 13 00
Fax: +31 (0) 23 568 13 88 • www.industrial.omron.eu
Cat. No. 4-E1-01 0/13 Note: Specifications are subject to change. © 2013 Omron Electronics LLC Printed in U.S.A.