Professional Documents
Culture Documents
Radial-Press-Holder-WF Information
Radial-Press-Holder-WF Information
1. Character Size
2. Radius to center of character (R1)
3. Number of Recesses
4. Type Capacity of Each Recess
5. Shank Diameter (SD) & Length (SL) PD and PL
6. Pilot Diameter (PD) & Length (PL) Required Diameter and
7. Quantity of Letter & Figure Type Required Length of Pilot
8. Quantity of Spacers Required
(Shown in red) Recess – Width in # of
characters
18