Professional Documents
Culture Documents
Document
Document
First, draw the blueprint of Second, cut it out carefully Third, score along the
the periscope and glue it to along the solid lines. dotted line.
the cardboard/illustration
board.
Fourth, fold carefully along Fifth, use tape to stick the Sixth, stick one mirror into
the scored dotted lines. periscope together. each end, facing each other.
Activity 9
Making Improvised Optical Device
Option 2: The Periscope
Task:
Construct a periscope and trace the incident and reflected rays
Materials
2 plane mirror
Illustration board/cardboard
Cutting mat
Glue/sticky tape
Cutter, scissors, foot, ruler, clear lamp
What we did to solve the problem?
We gathered informations from different resources on how to make an
improvised periscope. First we draw a blueprint of a periscope, then we stick it to
a cardboard. Next we cut through the lines. Then we used tape to stick the
periscope together. Lastly we stick the one mirror into each side 45° facing each
other.
What concepts our group considered in the construction of the device?
We considered on using 2 plane mirror, cardboard, tape and glue on constructing
this device and using the information we gathered on constructing the device.
What our group found out?
In the periscope, light hits the top mirror at 45° and reflects away at the same
angle. The light then bounces down to the bottom mirror. When that reflected
light hits the second mirror it is reflected again at 45°, right into your eye.
What our group recommends to improve the design/model built?
If your planning to make a periscope, you should use pvc pipe or ply wood for it
to be tougher. Also the bigger the mirror are the more you will see.