Professional Documents
Culture Documents
Economical
35-7/16"
37-3/16"
Interlock length 50-13/16" (1290)
(900)
(945)
Passage width 25-9/16" (650)
Total width 42-1/8" (1070)
Housing, base columns, AISI 304 Ø2-3/8" (Ø60) stainless steel tube with 3/8" (10)
guiding elements toughened safety glass panel and AISI 304 stainless steel
handrail with integrated sensor system. 42-1/18"
(1070)
ADA compliance 36" (915) width available.
31-7/8"
Barrier elements Two door leaves made of transparent polycarbonate, upper edge (810)
3-7/16" (900).
Swinging area monitored by separation sensors. 25-9/16"
(650)
Security Passage area monitored by simple sensor system with our
shortest installation length (simple level of single passage
monitoring in both directions).
5-1/8" 5-1/8"
Finish Stainless steel semi-gloss smooth finish. (130) (130)
Safety Low energy drive with energy content less than 1.18 lb/ft.
Function Type 2–power assisted motion; two servo-positioning drives/
electrically controlled in both directions.
Drives Integrated in the swing tube.
Operating modes Optical.
Normally closed.
Normally opened. (Barriers close on tailgate event.)
Electrical equipment Control system and power supply integrated in the unit.
Power supply 110 – 230 VAC, 50/60 Hz. 368 VA
Standby power consumption 17 VA
Standard adjustment in case Door leaves move freely.
of power failure
Installation Dowelled on finished floor level, FFL.
Not suitable for outdoor installation.
Protection classes Housing IP32, components conducting supply voltage IP42.
Entrance systems
Subject to change without notice
dormakaba HSB-E11 sensor barriers
HSB-E11
Installation drawings
inside
50-13/16" (1290)
22-13/16"
35-7/16" (900)
37-3/16" (945)
(580)
48" (1220)
5" (127)
12-5/8"
(320)
5-1/8" (130)
5-1/8" 31-7/8" (810) 41-3/4" (1060) 5-1/8"
(130) 89" (2260) (130)
outside
50-13/16" (1290)
for anchoring
/2"
35-7/16" (900)
37-3/16" (945)
1-1 )
0
( 0 uit
1
nd
1-9/16" (40)
co
area
Ø3-1/8" (Ø80)
FFL for conduits
3-9/16" (90)
2" (50)
5-1/8" (130)
handrail
1/ 7/8"
(1 2"
co 2.7) (22.5)
nd
ui
t
4-5/16" (110)
1-3/8"
(35)
2-3/4" (70)
for anchoring
flange plate
Ø5-1/2" (Ø140)
EO 8.18