2. Connect it to PC using provided USB cable 3. Launch Terminal program (attached) 4. Select COM port that is using AT (Connection settings are the same as in the screenshot below). Press Connect:
5. Press StartLog button and select where to save log file.
6. Enter command: .debug_on$0A 7. Enter command: .device_startup$0A 8. Enter command: .get_adc$0A This command can be used several times repeatedly to monitor power supply status. 9. Enter command: .modem$0A 10. Enter command: .info$0a 11. Leave it for ~15 minutes. 12. Please, send us the log file. If you get in the log file: -[2009.6.1 00:05:12]-[U1DBG->VCP][GPS]-GPS Aqtimeout! -[2009.6.1 00:05:12]-[U1DBG->VCP][GPS]-GPS Disabled!
This means that device is not
receiving GPS signal at all. Please note that GPS signal is available only outside under the "open sky". It is not available indoors!